Pods and Services - Core Concepts | Architecture

Important

Azure Red Hat OpenShift 3.11 will be retired 30 June 2022. Support for creation of new Azure Red Hat OpenShift 3.11 clusters continues through 30 November 2020. Following retirement, remaining Azure Red Hat OpenShift 3.11 clusters will be shut down to prevent security vulnerabilities.

Follow this guide to create an Azure Red Hat OpenShift 4 cluster. If you have specific questions, please contact us

Pods
- Pod Restart Policy
Services
- Headless services
Labels
Endpoints

Pods

Azure Red Hat OpenShift leverages the Kubernetes concept of a pod, which is one or more containers deployed together on one host, and the smallest compute unit that can be defined, deployed, and managed.

Pods are the rough equivalent of a machine instance (physical or virtual) to a container. Each pod is allocated its own internal IP address, therefore owning its entire port space, and containers within pods can share their local storage and networking.

Pods have a lifecycle; they are defined, then they are assigned to run on a node, then they run until their container(s) exit or they are removed for some other reason. Pods, depending on policy and exit code, may be removed after exiting, or may be retained in order to enable access to the logs of their containers.

Azure Red Hat OpenShift treats pods as largely immutable; changes cannot be made to a pod definition while it is running. Azure Red Hat OpenShift implements changes by terminating an existing pod and recreating it with modified configuration, base image(s), or both. Pods are also treated as expendable, and do not maintain state when recreated. Therefore pods should usually be managed by higher-level controllers, rather than directly by users.

Bare pods that are not managed by a replication controller will be not rescheduled upon node disruption.

Below is an example definition of a pod that provides a long-running service, which is actually a part of the Azure Red Hat OpenShift infrastructure: the integrated container image registry. It demonstrates many features of pods, most of which are discussed in other topics and thus only briefly mentioned here:

Pod Object Definition (YAML)

apiVersion: v1
kind: Pod
metadata:
  annotations: { ... }
  labels:                                (1)
    deployment: docker-registry-1
    deploymentconfig: docker-registry
    docker-registry: default
  generateName: docker-registry-1-       (2)
spec:
  containers:                            (3)
  - env:                                 (4)
    - name: OPENSHIFT_CA_DATA
      value: ...
    - name: OPENSHIFT_CERT_DATA
      value: ...
    - name: OPENSHIFT_INSECURE
      value: "false"
    - name: OPENSHIFT_KEY_DATA
      value: ...
    - name: OPENSHIFT_MASTER
      value: https://master.example.com:8443
    image: openshift/origin-docker-registry:v0.6.2 (5)
    imagePullPolicy: IfNotPresent
    name: registry
    ports:                              (6)
    - containerPort: 5000
      protocol: TCP
    resources: {}
    securityContext: { ... }            (7)
    volumeMounts:                       (8)
    - mountPath: /registry
      name: registry-storage
    - mountPath: /var/run/secrets/kubernetes.io/serviceaccount
      name: default-token-br6yz
      readOnly: true
  dnsPolicy: ClusterFirst
  imagePullSecrets:
  - name: default-dockercfg-at06w
  restartPolicy: Always                 (9)
  serviceAccount: default               (10)
  volumes:                              (11)
  - emptyDir: {}
    name: registry-storage
  - name: default-token-br6yz
    secret:
      secretName: default-token-br6yz

1	Pods can be "tagged" with one or more labels, which can then be used to select and manage groups of pods in a single operation. The labels are stored in key/value format in the `metadata` hash. One label in this example is docker-registry=default.
2	Pods must have a unique name within their namespace. A pod definition may specify the basis of a name with the `generateName` attribute, and random characters will be added automatically to generate a unique name.
3	`containers` specifies an array of container definitions; in this case (as with most), just one.
4	Environment variables can be specified to pass necessary values to each container.
5	Each container in the pod is instantiated from its own Docker-formatted container image.
6	The container can bind to ports which will be made available on the pod’s IP.
7	Azure Red Hat OpenShift defines a security context for containers which specifies whether they are allowed to run as privileged containers, run as a user of their choice, and more. The default context is very restrictive but administrators can modify this as needed.
8	The container specifies where external storage volumes should be mounted within the container. In this case, there is a volume for storing the registry’s data, and one for access to credentials the registry needs for making requests against the Azure Red Hat OpenShift API.
9	The pod restart policy with possible values `Always`, `OnFailure`, and `Never`. The default value is `Always`.
10	Pods making requests against the Azure Red Hat OpenShift API is a common enough pattern that there is a `serviceAccount` field for specifying which service account user the pod should authenticate as when making the requests. This enables fine-grained access control for custom infrastructure components.
11	The pod defines storage volumes that are available to its container(s) to use. In this case, it provides an ephemeral volume for the registry storage and a `secret` volume containing the service account credentials.

This pod definition does not include attributes that are filled by Azure Red Hat OpenShift automatically after the pod is created and its lifecycle begins. The Kubernetes pod documentation has details about the functionality and purpose of pods.

Pod Restart Policy

A pod restart policy determines how Azure Red Hat OpenShift responds when containers in that pod exit. The policy applies to all containers in that pod.

The possible values are:

Always - Tries restarting a successfully exited container on the pod continuously, with an exponential back-off delay (10s, 20s, 40s) until the pod is restarted. The default is Always.
OnFailure - Tries restarting a failed container on the pod with an exponential back-off delay (10s, 20s, 40s) capped at 5 minutes.
Never - Does not try to restart exited or failed containers on the pod. Pods immediately fail and exit.

Once bound to a node, a pod will never be bound to another node. This means that a controller is necessary in order for a pod to survive node failure:

Condition Controller Type Restart Policy

Condition	Controller Type	Restart Policy
Pods that are expected to terminate (such as batch computations)	Job	`OnFailure` or `Never`
Pods that are expected to not terminate (such as web servers)	Replication Controller	`Always`.
Pods that need to run one-per-machine	Daemonset	Any

Pods that are expected to terminate (such as batch computations)

Job

OnFailure or Never

Pods that are expected to not terminate (such as web servers)

Replication Controller

Always.

Pods that need to run one-per-machine

Daemonset

Any

If a container on a pod fails and the restart policy is set to OnFailure, the pod stays on the node and the container is restarted. If you do not want the container to restart, use a restart policy of Never.

If an entire pod fails, Azure Red Hat OpenShift starts a new pod. Developers need to address the possibility that applications might be restarted in a new pod. In particular, applications need to handle temporary files, locks, incomplete output, and so forth caused by previous runs.

Kubernetes architecture expects reliable endpoints from cloud providers. When a cloud provider is down, the kubelet prevents Azure Red Hat OpenShift from restarting.

If the underlying cloud provider endpoints are not reliable, do not install a cluster using cloud provider integration. Install the cluster as if it was in a no-cloud environment. It is not recommended to toggle cloud provider integration on or off in an installed cluster.

For details on how Azure Red Hat OpenShift uses restart policy with failed containers, see the Example States in the Kubernetes documentation.

Services

A Kubernetes service serves as an internal load balancer. It identifies a set of replicated pods in order to proxy the connections it receives to them. Backing pods can be added to or removed from a service arbitrarily while the service remains consistently available, enabling anything that depends on the service to refer to it at a consistent address. The default service clusterIP addresses are from the Azure Red Hat OpenShift internal network and they are used to permit pods to access each other.

Services are assigned an IP address and port pair that, when accessed, proxy to an appropriate backing pod. A service uses a label selector to find all the containers running that provide a certain network service on a certain port.

Like pods, services are REST objects. The following example shows the definition of a service for the pod defined above:

Service Object Definition (YAML)

apiVersion: v1
kind: Service
metadata:
  name: docker-registry      (1)
spec:
  selector:                  (2)
    docker-registry: default
  clusterIP: 172.30.136.123   (3)
  ports:
  - nodePort: 0
    port: 5000               (4)
    protocol: TCP
    targetPort: 5000         (5)

1	The service name docker-registry is also used to construct an environment variable with the service IP that is inserted into other pods in the same namespace. The maximum name length is 63 characters.
2	The label selector identifies all pods with the docker-registry=default label attached as its backing pods.
3	Virtual IP of the service, allocated automatically at creation from a pool of internal IPs.
4	Port the service listens on.
5	Port on the backing pods to which the service forwards connections.

The Kubernetes documentation has more information on services.

Headless services

If your application does not need load balancing or single-service IP addresses, you can create a headless service. When you create a headless service, no load-balancing or proxying is done and no cluster IP is allocated for this service. For such services, DNS is automatically configured depending on whether the service has selectors defined or not.

Services with selectors: For headless services that define selectors, the endpoints controller creates Endpoints records in the API and modifies the DNS configuration to return A records (addresses) that point directly to the pods backing the service.

Services without selectors: For headless services that do not define selectors, the endpoints controller does not create Endpoints records. However, the DNS system looks for and configures the following records:

For ExternalName type services, CNAME records.
For all other service types, A records for any endpoints that share a name with the service.

Creating a headless service

Creating a headless service is similar to creating a standard service, but you do not declare the ClusterIP address. To create a headless service, add the clusterIP: None parameter value to the service YAML definition.

For example, for a group of pods that you want to be a part of the same cluster or service.

List of Pods

$ oc get pods -o wide

Example Output

NAME               READY  STATUS    RESTARTS   AGE    IP            NODE
frontend-1-287hw   1/1    Running   0          7m     172.17.0.3    node_1
frontend-1-68km5   1/1    Running   0          7m     172.17.0.6    node_1

You can define the headless service as:

Headless Service Definition

apiVersion: v1
kind: Service
metadata:
  labels:
    app: ruby-helloworld-sample
    template: application-template-stibuild
  name: frontend-headless (1)
spec:
  clusterIP: None (2)
  ports:
  - name: web
    port: 5432
    protocol: TCP
    targetPort: 8080
  selector:
    name: frontend (3)
  sessionAffinity: None
  type: ClusterIP
status:
  loadBalancer: {}

1	Name of the headless service.
2	Setting `clusterIP` variable to `None` declares a headless service.
3	Selects all pods that have `frontend` label.

Also, headless service does not have any IP address of its own.

$ oc get svc

Example Output

NAME                TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)    AGE
frontend            ClusterIP   172.30.232.77    <none>        5432/TCP   12m
frontend-headless   ClusterIP   None             <none>        5432/TCP   10m

Endpoint discovery by using a headless service

The benefit of using a headless service is that you can discover a pod’s IP address directly. Standard services act as load balancer or proxy and give access to the workload object by using the service name. With headless services, the service name resolves to the set of IP addresses of the pods that are grouped by the service.

When you look up the DNS A record for a standard service, you get the loadbalanced IP of the service.

$ dig frontend.test A +search +short

Example Output

172.30.232.77

But for a headless service, you get the list of IPs of individual pods.

$ dig frontend-headless.test A +search +short

Example Output

172.17.0.3
172.17.0.6

For using a headless service with a StatefulSet and related use cases where you need to resolve DNS for the pod during initialization and termination, set publishNotReadyAddresses to true (the default value is false). When publishNotReadyAddresses is set to true, it indicates that DNS implementations must publish the notReadyAddresses of subsets for the Endpoints associated with the Service.

Labels

Labels are used to organize, group, or select API objects. For example, pods are "tagged" with labels, and then services use label selectors to identify the pods they proxy to. This makes it possible for services to reference groups of pods, even treating pods with potentially different containers as related entities.

Most objects can include labels in their metadata. So labels can be used to group arbitrarily-related objects; for example, all of the pods, services, replication controllers, and deployment configurations of a particular application can be grouped.

Labels are simple key/value pairs, as in the following example:

labels:
  key1: value1
  key2: value2

Consider:

A pod consisting of an nginx container, with the label role=webserver.
A pod consisting of an Apache httpd container, with the same label role=webserver.

A service or replication controller that is defined to use pods with the role=webserver label treats both of these pods as part of the same group.

The Kubernetes documentation has more information on labels.

Endpoints

The servers that back a service are called its endpoints, and are specified by an object of type Endpoints with the same name as the service. When a service is backed by pods, those pods are normally specified by a label selector in the service specification, and Azure Red Hat OpenShift automatically creates the Endpoints object pointing to those pods.

In some cases, you may want to create a service but have it be backed by external hosts rather than by pods in the Azure Red Hat OpenShift cluster. In this case, you can leave out the selector field in the service, and create the Endpoints object manually.

Note that Azure Red Hat OpenShift will not let most users manually create an Endpoints object that points to an IP address in the network blocks reserved for pod and service IPs. Only cluster admins or other users with permission to create resources under endpoints/restricted can create such Endpoint objects.