Secured <strong>route</strong>s - Configuring <strong>route</strong>s | Networking

Creating a re-encrypt route with a custom certificate
Creating an edge route with a custom certificate
Creating a passthrough route
Creating a route with externally managed certificate

Secure routes provide the ability to use several types of TLS termination to serve certificates to the client. The following sections describe how to create re-encrypt, edge, and passthrough routes with custom certificates.

edit

Creating a re-encrypt route with a custom certificate

You can configure a secure route using reencrypt TLS termination with a custom certificate by using the oc create route command.

Prerequisites

You must have a certificate/key pair in PEM-encoded files, where the certificate is valid for the route host.
You may have a separate CA certificate in a PEM-encoded file that completes the certificate chain.
You must have a separate destination CA certificate in a PEM-encoded file.
You must have a service that you want to expose.

Password protected key files are not supported. To remove a passphrase from a key file, use the following command:

$ openssl rsa -in password_protected_tls.key -out tls.key

Procedure

This procedure creates a route resource with a custom certificate and reencrypt TLS termination. The following assumes that the certificate/key pair are in the tls.crt and tls.key files in the current working directory. You must also specify a destination CA certificate to enable the Ingress Controller to trust the service’s certificate. You may also specify a CA certificate if needed to complete the certificate chain. Substitute the actual path names for tls.crt, tls.key, cacert.crt, and (optionally) ca.crt. Substitute the name of the Service resource that you want to expose for frontend. Substitute the appropriate hostname for www.example.com.

Create a secure route resource using reencrypt TLS termination and a custom certificate:

$ oc create route reencrypt --service=frontend --cert=tls.crt --key=tls.key --dest-ca-cert=destca.crt --ca-cert=ca.crt --hostname=www.example.com

If you examine the resulting route resource, it should look similar to the following:

YAML Definition of the Secure route

apiVersion: route.openshift.io/v1
kind: route
metadata:
  name: frontend
spec:
  host: www.example.com
  to:
    kind: Service
    name: frontend
  tls:
    termination: reencrypt
    key: |-
      -----BEGIN PRIVATE KEY-----
      [...]
      -----END PRIVATE KEY-----
    certificate: |-
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----
    caCertificate: |-
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----
    destinationCACertificate: |-
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----

See oc create route reencrypt --help for more options.

edit

Creating an edge route with a custom certificate

You can configure a secure route using edge TLS termination with a custom certificate by using the oc create route command. With an edge route, the Ingress Controller terminates TLS encryption before forwarding traffic to the destination pod. The route specifies the TLS certificate and key that the Ingress Controller uses for the route.

Prerequisites

You must have a certificate/key pair in PEM-encoded files, where the certificate is valid for the route host.
You may have a separate CA certificate in a PEM-encoded file that completes the certificate chain.
You must have a service that you want to expose.

Password protected key files are not supported. To remove a passphrase from a key file, use the following command:

$ openssl rsa -in password_protected_tls.key -out tls.key

Procedure

This procedure creates a route resource with a custom certificate and edge TLS termination. The following assumes that the certificate/key pair are in the tls.crt and tls.key files in the current working directory. You may also specify a CA certificate if needed to complete the certificate chain. Substitute the actual path names for tls.crt, tls.key, and (optionally) ca.crt. Substitute the name of the service that you want to expose for frontend. Substitute the appropriate hostname for www.example.com.

Create a secure route resource using edge TLS termination and a custom certificate.

$ oc create route edge --service=frontend --cert=tls.crt --key=tls.key --ca-cert=ca.crt --hostname=www.example.com

If you examine the resulting route resource, it should look similar to the following:

YAML Definition of the Secure route

apiVersion: route.openshift.io/v1
kind: route
metadata:
  name: frontend
spec:
  host: www.example.com
  to:
    kind: Service
    name: frontend
  tls:
    termination: edge
    key: |-
      -----BEGIN PRIVATE KEY-----
      [...]
      -----END PRIVATE KEY-----
    certificate: |-
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----
    caCertificate: |-
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----

See oc create route edge --help for more options.

edit

Creating a passthrough route

You can configure a secure route using passthrough termination by using the oc create route command. With passthrough termination, encrypted traffic is sent straight to the destination without the router providing TLS termination. Therefore no key or certificate is required on the route.

Prerequisites

You must have a service that you want to expose.

Procedure

Create a route resource:

$ oc create route passthrough route-passthrough-secured --service=frontend --port=8080

If you examine the resulting route resource, it should look similar to the following:

A Secured route Using Passthrough Termination

apiVersion: route.openshift.io/v1
kind: route
metadata:
  name: route-passthrough-secured (1)
spec:
  host: www.example.com
  port:
    targetPort: 8080
  tls:
    termination: passthrough (2)
    insecureEdgeTerminationPolicy: None (3)
  to:
    kind: Service
    name: frontend

1	The name of the object, which is limited to 63 characters.
2	The `termination` field is set to `passthrough`. This is the only required `tls` field.
3	Optional `insecureEdgeTerminationPolicy`. The only valid values are `None`, `Redirect`, or empty for disabled.

The destination pod is responsible for serving certificates for the traffic at the endpoint. This is currently the only method that can support requiring client certificates, also known as two-way authentication.

edit

Creating a route with externally managed certificate

Securing route with external certificates in TLS secrets is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

You can configure Red Hat OpenShift Service on AWS routes with third-party certificate management solutions by using the .spec.tls.externalCertificate field of the route API. You can reference externally managed TLS certificates via secrets, eliminating the need for manual certificate management. Using the externally managed certificate reduces errors ensuring a smoother rollout of certificate updates, enabling the OpenShift router to serve renewed certificates promptly.

This feature applies to both edge routes and re-encrypt routes.

Prerequisites

You must enable the routeExternalCertificate feature gate.
You must have the create and update permissions on the routes/custom-host.
You must have a secret containing a valid certificate/key pair in PEM-encoded format of type kubernetes.io/tls, which includes both tls.key and tls.crt keys.
You must place the referenced secret in the same namespace as the route you want to secure.

Procedure

Create a role in the same namespace as the secret to allow the router service account read access by running the following command:
```
$ oc create role secret-reader --verb=get,list,watch --resource=secrets --resource-name=<secret-name> \ (1)
--namespace=<current-namespace> (2)
```
1 Specify the actual name of your secret.

2 Specify the namespace where both your secret and route reside.
Create a rolebinding in the same namespace as the secret and bind the router service account to the newly created role by running the following command:
```
$ oc create rolebinding secret-reader-binding --role=secret-reader --serviceaccount=openshift-ingress:router --namespace=<current-namespace> (1)
```
1 Specify the namespace where both your secret and route reside.

Create a YAML file that defines the route and specifies the secret containing your certificate using the following example.

YAML definition of the secure route

apiVersion: route.openshift.io/v1
kind: route
metadata:
  name: myedge
  namespace: test
spec:
  host: myedge-test.apps.example.com
  tls:
    externalCertificate:
      name: <secret-name> (1)
    termination: edge
    [...]
[...]

1	Specify the actual name of your secret.

Create a route resource by running the following command:
```
$ oc apply -f <route.yaml> (1)
```
1 Specify the generated YAML filename.

If the secret exists and has a certificate/key pair, the router will serve the generated certificate if all prerequisites are met.

If .spec.tls.externalCertificate is not provided, the router will use default generated certificates.

You cannot provide the .spec.tls.certificate field or the .spec.tls.key field when using the .spec.tls.externalCertificate field.

Additional resources

For troubleshooting routes with externally managed certificates, check the Red Hat OpenShift Service on AWS router pod logs for errors, see Investigating pod issues.

1	Specify the actual name of your secret.
2	Specify the namespace where both your secret and route reside.

Secured routes

Creating a re-encrypt route with a custom certificate

Creating an edge route with a custom certificate

Creating a passthrough route

Creating a route with externally managed certificate