Integrating <strong>service</strong> Mesh with OpenShift Serverless | Integrations

Prerequisites
Creating a certificate to encrypt incoming external traffic
Integrating service Mesh with OpenShift Serverless
Enabling Knative Serving metrics when using service Mesh with mTLS
Integrating service Mesh with OpenShift Serverless when Kourier is enabled
Improving net-istio memory usage by using secret filtering for service Mesh

The OpenShift Serverless Operator provides Kourier as the default ingress for Knative. However, you can use service Mesh with OpenShift Serverless whether Kourier is enabled or not. Integrating with Kourier disabled allows you to configure additional networking and routing options that the Kourier ingress does not support, such as mTLS functionality.

OpenShift Serverless only supports the use of Red Hat OpenShift service Mesh functionality that is explicitly documented in this guide, and does not support other undocumented features.

Prerequisites

The examples in the following procedures use the domain example.com. The example certificate for this domain is used as a certificate authority (CA) that signs the subdomain certificate.

To complete and verify these procedures in your deployment, you need either a certificate signed by a widely trusted public CA or a CA provided by your organization. Example commands must be adjusted according to your domain, subdomain, and CA.
You must configure the wildcard certificate to match the domain of your OpenShift Container Platform cluster. For example, if your OpenShift Container Platform console address is https://console-openshift-console.apps.openshift.example.com, you must configure the wildcard certificate so that the domain is *.apps.openshift.example.com. For more information about configuring wildcard certificates, see the following topic about Creating a certificate to encrypt incoming external traffic.
If you want to use any domain name, including those which are not subdomains of the default OpenShift Container Platform cluster domain, you must set up domain mapping for those domains. For more information, see the OpenShift Serverless documentation about Creating a custom domain mapping.

Creating a certificate to encrypt incoming external traffic

By default, the service Mesh mTLS feature only secures traffic inside of the service Mesh itself, between the ingress gateway and individual pods that have sidecars. To encrypt traffic as it flows into the OpenShift Container Platform cluster, you must generate a certificate before you enable the OpenShift Serverless and service Mesh integration.

Prerequisites

You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift service on AWS or OpenShift Dedicated.
You have installed the OpenShift Serverless Operator and Knative Serving.
Install the OpenShift CLI (oc).
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

Procedure

Create a root certificate and private key that signs the certificates for your Knative services:

$ openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 \
    -subj '/O=Example Inc./CN=example.com' \
    -keyout root.key \
    -out root.crt

Create a wildcard certificate:

$ openssl req -nodes -newkey rsa:2048 \
    -subj "/CN=*.apps.openshift.example.com/O=Example Inc." \
    -keyout wildcard.key \
    -out wildcard.csr

Sign the wildcard certificate:

$ openssl x509 -req -days 365 -set_serial 0 \
    -CA root.crt \
    -CAkey root.key \
    -in wildcard.csr \
    -out wildcard.crt

Create a secret by using the wildcard certificate:
```
$ oc create -n istio-system secret tls wildcard-certs \
    --key=wildcard.key \
    --cert=wildcard.crt
```
This certificate is picked up by the gateways created when you integrate OpenShift Serverless with service Mesh, so that the ingress gateway serves traffic with this certificate.

Integrating service Mesh with OpenShift Serverless

You can integrate service Mesh with OpenShift Serverless without using Kourier as the default ingress. To do this, do not install the Knative Serving component before completing the following procedure. There are additional steps required when creating the KnativeServing custom resource definition (CRD) to integrate Knative Serving with service Mesh, which are not covered in the general Knative Serving installation procedure. This procedure might be useful if you want to integrate service Mesh as the default and only ingress for your OpenShift Serverless installation.

Prerequisites

You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift service on AWS or OpenShift Dedicated.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.
Install the Red Hat OpenShift service Mesh Operator and create a serviceMeshControlPlane resource in the istio-system namespace. If you want to use mTLS functionality, you must also set the spec.security.dataPlane.mtls field for the serviceMeshControlPlane resource to true.

Using OpenShift Serverless with service Mesh is only supported with Red Hat OpenShift service Mesh version 2.0.5 or later.
Install the OpenShift Serverless Operator.
Install the OpenShift CLI (oc).

Procedure

Add the namespaces that you would like to integrate with service Mesh to the serviceMeshMemberRoll object as members:
```
apiVersion: maistra.io/v1
kind: serviceMeshMemberRoll
metadata:
  name: default
  namespace: istio-system
spec:
  members: (1)
    - knative-serving
    - knative-eventing
    - <namespace>
```
1 A list of namespaces to be integrated with service Mesh.

This list of namespaces must include the knative-serving and knative-eventing namespaces.
Apply the serviceMeshMemberRoll resource:
```
$ oc apply -f <filename>
```

Create the necessary gateways so that service Mesh can accept traffic:

Example knative-local-gateway object using HTTP

apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: knative-ingress-gateway
  namespace: knative-serving
spec:
  selector:
    istio: ingressgateway
  servers:
    - port:
        number: 443
        name: https
        protocol: HTTPS
      hosts:
        - "*"
      tls:
        mode: SIMPLE
        credentialName: <wildcard_certs> (1)
---
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
 name: knative-local-gateway
 namespace: knative-serving
spec:
 selector:
   istio: ingressgateway
 servers:
   - port:
       number: 8081
       name: http
       protocol: HTTP (2)
     hosts:
       - "*"
---
apiVersion: v1
kind: service
metadata:
 name: knative-local-gateway
 namespace: istio-system
 labels:
   experimental.istio.io/disable-gateway-port-translation: "true"
spec:
 type: ClusterIP
 selector:
   istio: ingressgateway
 ports:
   - name: http2
     port: 80
     targetPort: 8081

1	Add the name of the secret that contains the wildcard certificate.
2	The `knative-local-gateway` serves HTTP traffic. Using HTTP means that traffic coming from outside of service Mesh, but using an internal hostname, such as `example.default.svc.cluster.local`, is not encrypted. You can set up encryption for this path by creating another wildcard certificate and an additional gateway that uses a different `protocol` spec.

Example knative-local-gateway object using HTTPS

apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: knative-local-gateway
  namespace: knative-serving
spec:
  selector:
    istio: ingressgateway
  servers:
    - port:
        number: 443
        name: https
        protocol: HTTPS
      hosts:
        - "*"
      tls:
        mode: SIMPLE
        credentialName: <wildcard_certs>

Apply the Gateway resources:
```
$ oc apply -f <filename>
```

Install Knative Serving by creating the following KnativeServing custom resource definition (CRD), which also enables the Istio integration:

apiVersion: operator.knative.dev/v1beta1
kind: KnativeServing
metadata:
  name: knative-serving
  namespace: knative-serving
spec:
  ingress:
    istio:
      enabled: true (1)
  deployments: (2)
  - name: activator
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: autoscaler
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"

1	Enables Istio integration.
2	Enables sidecar injection for Knative Serving data plane pods.

Apply the KnativeServing resource:
```
$ oc apply -f <filename>
```

Install Knative Eventing by creating the following KnativeEventing custom resource definition (CRD), which also enables the Istio integration:

apiVersion: operator.knative.dev/v1beta1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  config:
    features:
      istio: enabled (1)
  workloads:
  - name: pingsource-mt-adapter
    annotations:
      "sidecar.istio.io/inject": "true" (2)
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: imc-dispatcher
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: mt-broker-ingress
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: mt-broker-filter
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"

1	Enables Eventing istio controller to create a `DestinationRule` for each InMemoryChannel or KafkaChannel service.
2	Enables sidecar injection for Knative Eventing pods.

The Knative Eventing integration with service Mesh is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Apply the KnativeEventing resource:
```
$ oc apply -f <filename>
```

Install Knative Kafka by creating the following KnativeKafka custom resource definition (CRD), which also enables the Istio integration:

apiVersion: operator.serverless.openshift.io/v1alpha1
kind: KnativeKafka
metadata:
  name: knative-kafka
  namespace: knative-eventing
spec:
  channel:
    enabled: true
    bootstrapServers: <bootstrap_servers> (1)
  source:
    enabled: true
  broker:
    enabled: true
    defaultConfig:
      bootstrapServers: <bootstrap_servers> (1)
      numPartitions: <num_partitions>
      replicationFactor: <replication_factor>
  sink:
    enabled: true
  workloads: (2)
  - name: kafka-controller
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-broker-receiver
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-broker-dispatcher
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-channel-receiver
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-channel-dispatcher
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-source-dispatcher
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"
  - name: kafka-sink-receiver
    annotations:
      "sidecar.istio.io/inject": "true"
      "sidecar.istio.io/rewriteAppHTTPProbers": "true"

1	The Apache Kafka cluster URL, for example: `my-cluster-kafka-bootstrap.kafka:9092`.
2	Enables sidecar injection for Knative Kafka pods.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Apply the KnativeKafka resource:
```
$ oc apply -f <filename>
```

Install serviceEntry to make Red Hat OpenShift service Mesh aware of the communication between KnativeKafka components and an Apache Kafka cluster:

apiVersion: networking.istio.io/v1alpha3
kind: serviceEntry
metadata:
  name: kafka-cluster
  namespace: knative-eventing
spec:
  hosts: (1)
    - <bootstrap_servers_without_port>
  exportTo:
    - "."
  ports: (2)
    - number: 9092
      name: tcp-plain
      protocol: TCP
    - number: 9093
      name: tcp-tls
      protocol: TCP
    - number: 9094
      name: tcp-sasl-tls
      protocol: TCP
    - number: 9095
      name: tcp-sasl-plain
      protocol: TCP
    - number: 9096
      name: tcp-noauth
      protocol: TCP
  location: MESH_EXTERNAL
  resolution: NONE

1	The list of Apache Kafka cluster hosts, for example: `my-cluster-kafka-bootstrap.kafka`.
2	Apache Kafka cluster listeners ports.

The listed ports in spec.ports are example TCP ports and depend on how the Apache Kafka cluster is configured.

Apply the serviceEntry resource:
```
$ oc apply -f <filename>
```
Ensure that addresses are set in the serviceEntry. If the addresses are not set, all the traffic on the port defined in the serviceEntry is matched regardless of the host.

Verification

Create a Knative service that has sidecar injection enabled and uses a pass-through route:

apiVersion: serving.knative.dev/v1
kind: service
metadata:
  name: <service_name>
  namespace: <namespace> (1)
  annotations:
    serving.knative.openshift.io/enablePassthrough: "true" (2)
spec:
  template:
    metadata:
      annotations:
        sidecar.istio.io/inject: "true" (3)
        sidecar.istio.io/rewriteAppHTTPProbers: "true"
    spec:
      containers:
      - image: <image_url>

1	A namespace that is part of the service Mesh member roll.
2	Instructs Knative Serving to generate an OpenShift Container Platform pass-through enabled route, so that the certificates you have generated are served through the ingress gateway directly.
3	Injects service Mesh sidecars into the Knative service pods.

Apply the service resource:
```
$ oc apply -f <filename>
```

Verification

Access your serverless application by using a secure connection that is now trusted by the CA:

$ curl --cacert root.crt <service_url>

Example command

$ curl --cacert root.crt https://hello-default.apps.openshift.example.com

Example output

Hello Openshift!

Enabling Knative Serving metrics when using service Mesh with mTLS

If service Mesh is enabled with mTLS, metrics for Knative Serving are disabled by default, because service Mesh prevents Prometheus from scraping metrics. This section shows how to enable Knative Serving metrics when using service Mesh and mTLS.

Prerequisites

You have installed the OpenShift Serverless Operator and Knative Serving on your cluster.
You have installed Red Hat OpenShift service Mesh with the mTLS functionality enabled.
You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift service on AWS or OpenShift Dedicated.
Install the OpenShift CLI (oc).
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

Procedure

Specify prometheus as the metrics.backend-destination in the observability spec of the Knative Serving custom resource (CR):

apiVersion: operator.knative.dev/v1beta1
kind: KnativeServing
metadata:
  name: knative-serving
spec:
  config:
    observability:
      metrics.backend-destination: "prometheus"
...

This step prevents metrics from being disabled by default.

Apply the following network policy to allow traffic from the Prometheus namespace:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: allow-from-openshift-monitoring-ns
  namespace: knative-serving
spec:
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          name: "openshift-monitoring"
  podSelector: {}
...

Modify and reapply the default service Mesh control plane in the istio-system namespace, so that it includes the following spec:

...
spec:
  proxy:
    networking:
      trafficControl:
        inbound:
          excludedPorts:
          - 8444
...

Integrating service Mesh with OpenShift Serverless when Kourier is enabled

You can use service Mesh with OpenShift Serverless even if Kourier is already enabled. This procedure might be useful if you have already installed Knative Serving with Kourier enabled, but decide to add a service Mesh integration later.

Prerequisites

You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift service on AWS or OpenShift Dedicated.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.
Install the OpenShift CLI (oc).
Install the OpenShift Serverless Operator and Knative Serving on your cluster.
Install Red Hat OpenShift service Mesh. OpenShift Serverless with service Mesh and Kourier is supported for use with both Red Hat OpenShift service Mesh versions 1.x and 2.x.

Procedure

Add the namespaces that you would like to integrate with service Mesh to the serviceMeshMemberRoll object as members:

apiVersion: maistra.io/v1
kind: serviceMeshMemberRoll
metadata:
  name: default
  namespace: istio-system
spec:
  members:
    - <namespace> (1)
...

1	A list of namespaces to be integrated with service Mesh.

Apply the serviceMeshMemberRoll resource:
```
$ oc apply -f <filename>
```

Create a network policy that permits traffic flow from Knative system pods to Knative services:

For each namespace that you want to integrate with service Mesh, create a NetworkPolicy resource:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: allow-from-serving-system-namespace
  namespace: <namespace> (1)
spec:
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          knative.openshift.io/part-of: "openshift-serverless"
  podSelector: {}
  policyTypes:
  - Ingress
...

1	Add the namespace that you want to integrate with service Mesh.

The knative.openshift.io/part-of: "openshift-serverless" label was added in OpenShift Serverless 1.22.0. If you are using OpenShift Serverless 1.21.1 or earlier, add the knative.openshift.io/part-of label to the knative-serving and knative-serving-ingress namespaces.

Add the label to the knative-serving namespace:

$ oc label namespace knative-serving knative.openshift.io/part-of=openshift-serverless

Add the label to the knative-serving-ingress namespace:

$ oc label namespace knative-serving-ingress knative.openshift.io/part-of=openshift-serverless

Apply the NetworkPolicy resource:
```
$ oc apply -f <filename>
```

Improving net-istio memory usage by using secret filtering for service Mesh

By default, the informers implementation for the Kubernetes client-go library fetches all resources of a particular type. This can lead to a substantial overhead when many resources are available, which can cause the Knative net-istio ingress controller to fail on large clusters due to memory leaking. However, a filtering mechanism is available for the Knative net-istio ingress controller, which enables the controller to only fetch Knative related secrets. You can enable this mechanism by adding an annotation to the KnativeServing custom resource (CR).

If you enable secret filtering, all of your secrets need to be labeled with networking.internal.knative.dev/certificate-uid: "<id>". Otherwise, Knative Serving does not detect them, which leads to failures. You must label both new and existing secrets.

Prerequisites

You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift service on AWS or OpenShift Dedicated.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.
Install Red Hat OpenShift service Mesh. OpenShift Serverless with service Mesh only is supported for use with Red Hat OpenShift service Mesh version 2.0.5 or later.
Install the OpenShift Serverless Operator and Knative Serving.
Install the OpenShift CLI (oc).

Procedure

Add the serverless.openshift.io/enable-secret-informer-filtering annotation to the KnativeServing CR:

Example KnativeServing CR

apiVersion: operator.knative.dev/v1beta1
kind: KnativeServing
metadata:
  name: knative-serving
  namespace: knative-serving
  annotations:
    serverless.openshift.io/enable-secret-informer-filtering: "true" (1)
spec:
  ingress:
    istio:
      enabled: true
  deployments:
    - annotations:
        sidecar.istio.io/inject: "true"
        sidecar.istio.io/rewriteAppHTTPProbers: "true"
      name: activator
    - annotations:
        sidecar.istio.io/inject: "true"
        sidecar.istio.io/rewriteAppHTTPProbers: "true"
      name: autoscaler

1	Adding this annotation injects an environment variable, `ENABLE_SECRET_INFORMER_FILTERING_BY_CERT_UID=true`, to the `net-istio` controller pod.

This annotation is ignored if you set a different value by overriding deployments.