This is a cache of https://docs.okd.io/4.15/installing/installing_ibm_cloud_public/installing-ibm-cloud-restricted.html. It is a snapshot of the page at 2024-11-23T20:15:41.613+0000.
Installing a cluster on IBM Cloud in a restricted network - Installing on IBM Cloud | Installing | OKD 4.15
  1. Documentation
×

Installing a cluster on IBM Cloud in a restricted network

Prerequisites

  • You reviewed details about the OKD installation and update processes.

  • You configured an IBM Cloud account to host the cluster.

  • You have a container image registry that is accessible to the internet and your restricted network. The container image registry should mirror the contents of the OpenShift image registry and contain the installation media. For more information, see Mirroring images for a disconnected installation using the oc-mirror plugin.

  • You have an existing VPC on IBM Cloud® that meets the following requirements:

    • The VPC contains the mirror registry or has firewall rules or a peering connection to access the mirror registry that is hosted elsewhere.

    • The VPC can access IBM Cloud® service endpoints using a public endpoint. If network restrictions limit access to public service endpoints, evaluate those services for alternate endpoints that might be available. For more information see Access to IBM service endpoints.

    You cannot use the VPC that the installation program provisions by default.

  • If you plan on configuring endpoint gateways to use IBM Cloud® Virtual Private Endpoints, consider the following requirements:

    • Endpoint gateway support is currently limited to the us-east and us-south regions.

    • The VPC must allow traffic to and from the endpoint gateways. You can use the VPC’s default security group, or a new security group, to allow traffic on port 443. For more information, see Allowing endpoint gateway traffic.

  • If you use a firewall, you configured it to allow the sites that your cluster requires access to.

  • You configured the ccoctl utility before you installed the cluster. For more information, see Configuring IAM for IBM Cloud VPC.

About installations in restricted networks

In OKD 4.15, you can perform an installation that does not require an active connection to the internet to obtain software components. Restricted network installations can be completed using installer-provisioned infrastructure or user-provisioned infrastructure, depending on the cloud platform to which you are installing the cluster.

Required internet access and an installation host

You complete the installation using a bastion host or portable device that can access both the internet and your closed network. You must use a host with internet access to:

  • Download the installation program, the OpenShift CLI (oc), and the CCO utility (ccoctl).

  • Use the installation program to locate the Fedora CoreOS (FCOS) image and create the installation configuration file.

  • Use oc to extract ccoctl from the CCO container image.

  • Use oc and ccoctl to configure IAM for IBM Cloud®.

Access to a mirror registry

To complete a restricted network installation, you must create a registry that mirrors the contents of the OpenShift image registry and contains the installation media.

You can create this registry on a mirror host, which can access both the internet and your restricted network, or by using other methods that meet your organization’s security restrictions.

For more information on mirroring images for a disconnected installation, see "Additional resources".

Access to IBM service endpoints

The installation program requires access to the following IBM Cloud® service endpoints:

  • Cloud Object Storage

  • DNS Services

  • Global Search

  • Global Tagging

  • Identity Services

  • Resource Controller

  • Resource Manager

  • VPC

If you are specifying an IBM® Key Protect for IBM Cloud® root key as part of the installation process, the service endpoint for Key Protect is also required.

By default, the public endpoint is used to access the service. If network restrictions limit access to public service endpoints, you can override the default behavior.

Before deploying the cluster, you can update the installation configuration file (install-config.yaml) to specify the URI of an alternate service endpoint. For more information on usage, see "Additional resources".

Additional limits

Clusters in restricted networks have the following additional limitations and restrictions:

  • The ClusterVersion status includes an Unable to retrieve available updates error.

  • By default, you cannot use the contents of the Developer Catalog because you cannot access the required image stream tags.

Additional resources

About using a custom VPC

In OKD 4.15, you can deploy a cluster into the subnets of an existing IBM® Virtual Private Cloud (VPC). Deploying OKD into an existing VPC can help you avoid limit constraints in new accounts or more easily abide by the operational constraints that your company’s guidelines set. If you cannot obtain the infrastructure creation permissions that are required to create the VPC yourself, use this installation option.

Because the installation program cannot know what other components are in your existing subnets, it cannot choose subnet CIDRs and so forth. You must configure networking for the subnets to which you will install the cluster.

Requirements for using your VPC

You must correctly configure the existing VPC and its subnets before you install the cluster. The installation program does not create the following components:

  • NAT gateways

  • Subnets

  • Route tables

  • VPC network

The installation program cannot:

  • Subdivide network ranges for the cluster to use

  • Set route tables for the subnets

  • Set VPC options like DHCP

The installation program requires that you use the cloud-provided DNS server. Using a custom DNS server is not supported and causes the installation to fail.

VPC validation

The VPC and all of the subnets must be in an existing resource group. The cluster is deployed to the existing VPC.

As part of the installation, specify the following in the install-config.yaml file:

  • The name of the existing resource group that contains the VPC and subnets (networkResourceGroupName)

  • The name of the existing VPC (vpcName)

  • The subnets that were created for control plane machines and compute machines (controlPlaneSubnets and computeSubnets)

Additional installer-provisioned cluster resources are deployed to a separate resource group (resourceGroupName). You can specify this resource group before installing the cluster. If undefined, a new resource group is created for the cluster.

To ensure that the subnets that you provide are suitable, the installation program confirms the following:

  • All of the subnets that you specify exist.

  • For each availability zone in the region, you specify:

    • One subnet for control plane machines.

    • One subnet for compute machines.

  • The machine CIDR that you specified contains the subnets for the compute machines and control plane machines.

Subnet IDs are not supported.

Isolation between clusters

If you deploy OKD to an existing network, the isolation of cluster services is reduced in the following ways:

  • You can install multiple OKD clusters in the same VPC.

  • ICMP ingress is allowed to the entire network.

  • TCP port 22 ingress (SSH) is allowed to the entire network.

  • Control plane TCP 6443 ingress (Kubernetes API) is allowed to the entire network.

  • Control plane TCP 22623 ingress (MCS) is allowed to the entire network.

Allowing endpoint gateway traffic

If you are using IBM Cloud® Virtual Private endpoints, your Virtual Private Cloud (VPC) must be configured to allow traffic to and from the endpoint gateways.

A VPC’s default security group is configured to allow all outbound traffic to endpoint gateways. Therefore, the simplest way to allow traffic between your VPC and endpoint gateways is to modify the default security group to allow inbound traffic on port 443.

If you choose to configure a new security group, the security group must be configured to allow both inbound and outbound traffic.
Prerequisites

  • You have installed the IBM Cloud® Command Line Interface utility (ibmcloud).

Procedure

  1. Obtain the identifier for the default security group by running the following command:

    $ DEFAULT_SG=$(ibmcloud is vpc <your_vpc_name> --output JSON | jq -r '.default_security_group.id')

  2. Add a rule that allows inbound traffic on port 443 by running the following command:

    $ ibmcloud is security-group-rule-add $DEFAULT_SG inbound tcp --remote 0.0.0.0/0 --port-min 443 --port-max 443

Be sure that your endpoint gateways are configured to use this security group.

Generating a key pair for cluster node SSH access

During an OKD installation, you can provide an SSH public key to the installation program. The key is passed to the Fedora CoreOS (FCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys list for the core user on each node, which enables password-less authentication.

After the key is passed to the nodes, you can use the key pair to SSH in to the FCOS nodes as the user core. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.

If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather command also requires the SSH public key to be in place on the cluster nodes.

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

On clusters running Fedora CoreOS (FCOS), the SSH keys specified in the Ignition config files are written to the /home/core/.ssh/authorized_keys.d/core file. However, the Machine Config Operator manages SSH keys in the /home/core/.ssh/authorized_keys file and configures sshd to ignore the /home/core/.ssh/authorized_keys.d/core file. As a result, newly provisioned OKD nodes are not accessible using SSH until the Machine Config Operator reconciles the machine configs with the authorized_keys file. After you can access the nodes using SSH, you can delete the /home/core/.ssh/authorized_keys.d/core file.
Procedure

  1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

    $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> (1)
    1 Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    If you plan to install an OKD cluster that uses the Fedora cryptographic libraries that have been submitted to NIST for fips 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. View the public SSH key:

    $ cat <path>/<file_name>.pub

    For example, run the following to view the ~/.ssh/id_ed25519.pub public key:

    $ cat ~/.ssh/id_ed25519.pub

  3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

    On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

    1. If the ssh-agent process is not already running for your local user, start it as a background task:

      $ eval "$(ssh-agent -s)"
      Example output
      Agent pid 31874

      If your cluster is in fips mode, only use fips-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  4. Add your SSH private key to the ssh-agent:

    $ ssh-add <path>/<file_name> (1)
    1 Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
    Example output
    Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
Next steps

  • When you install OKD, provide the SSH public key to the installation program.

Exporting the API key

You must set the API key you created as a global variable; the installation program ingests the variable during startup to set the API key.

Prerequisites

  • You have created either a user API key or service ID API key for your IBM Cloud® account.

Procedure

  • Export your API key for your account as a global variable:

    $ export IC_API_KEY=<api_key>

You must set the variable name exactly as specified; the installation program expects the variable name to be present during startup.

Downloading the RHCOS cluster image

The installation program requires the Fedora CoreOS (FCOS) image to install the cluster. While optional, downloading the Fedora CoreOS (FCOS) before deploying removes the need for internet access when creating the cluster.

Use the installation program to locate and download the Fedora CoreOS (FCOS) image.

Prerequisites

  • The host running the installation program has internet access.

Procedure

  1. Change to the directory that contains the installation program and run the following command:

    $ ./openshift-install coreos print-stream-json

  2. Use the output of the command to find the location of the IBM Cloud® image.

    .Example output
----
  "release": "415.92.202311241643-0",
  "formats": {
    "qcow2.gz": {
      "disk": {
        "location": "https://rhcos.mirror.openshift.com/art/storage/prod/streams/4.15-9.2/builds/415.92.202311241643-0/x86_64/rhcos-415.92.202311241643-0-ibmcloud.x86_64.qcow2.gz",
        "sha256": "6b562dee8431bec3b93adeac1cfefcd5e812d41e3b7d78d3e28319870ffc9eae",
        "uncompressed-sha256": "5a0f9479505e525a30367b6a6a6547c86a8f03136f453c1da035f3aa5daa8bc9"
----

  3. Download and extract the image archive. Make the image available on the host that the installation program uses to create the cluster.

Manually creating the installation configuration file

Installing the cluster requires that you manually create the installation configuration file.

Prerequisites

  • You have obtained the OKD installation program and the pull secret for your cluster.

  • You have the imageContentSourcePolicy.yaml file that was created when you mirrored your registry.

  • You have obtained the contents of the certificate for your mirror registry.

Procedure

  1. Create an installation directory to store your required installation assets in:

    $ mkdir <installation_directory>

    You must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OKD version.

  2. Customize the sample install-config.yaml file template that is provided and save it in the <installation_directory>.

    You must name this configuration file install-config.yaml.

    When customizing the sample template, be sure to provide the information that is required for an installation in a restricted network:

    1. Update the pullSecret value to contain the authentication information for your registry:

      pullSecret: '{"auths":{"<mirror_host_name>:5000": {"auth": "<credentials>","email": "you@example.com"}}}'

      For <mirror_host_name>, specify the registry domain name that you specified in the certificate for your mirror registry, and for <credentials>, specify the base64-encoded user name and password for your mirror registry.

    2. Add the additionalTrustBundle parameter and value.

      additionalTrustBundle: |
  -----BEGIN CERTIFICATE-----
  ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
  -----END CERTIFICATE-----

      The value must be the contents of the certificate file that you used for your mirror registry. The certificate file can be an existing, trusted certificate authority, or the self-signed certificate that you generated for the mirror registry.

    3. Define the network and subnets for the VPC to install the cluster in under the parent platform.ibmcloud field:

      vpcName: <existing_vpc>
controlPlaneSubnets: <control_plane_subnet>
computeSubnets: <compute_subnet>

      For platform.ibmcloud.vpcName, specify the name for the existing IBM Cloud VPC. For platform.ibmcloud.controlPlaneSubnets and platform.ibmcloud.computeSubnets, specify the existing subnets to deploy the control plane machines and compute machines, respectively.

    4. Add the image content resources, which resemble the following YAML excerpt:

      imageContentSources:
- mirrors:
  - <mirror_host_name>:5000/<repo_name>/release
  source: quay.io/openshift-release-dev/ocp-release
- mirrors:
  - <mirror_host_name>:5000/<repo_name>/release
  source: registry.redhat.io/ocp/release

      For these values, use the imageContentSourcePolicy.yaml file that was created when you mirrored the registry.

    5. If network restrictions limit the use of public endpoints to access the required IBM Cloud® services, add the serviceEndpoints stanza to platform.ibmcloud to specify an alternate service endpoint.

      You can specify only one alternate service endpoint for each service.
      Example of using alternate services endpoints
      # ...
serviceEndpoints:
  - name: IAM
    url: <iam_alternate_endpoint_url>
  - name: VPC
    url: <vpc_alternate_endpoint_url>
  - name: ResourceController
    url: <resource_controller_alternate_endpoint_url>
  - name: ResourceManager
    url: <resource_manager_alternate_endpoint_url>
  - name: DNSServices
    url: <dns_services_alternate_endpoint_url>
  - name: COS
    url: <cos_alternate_endpoint_url>
  - name: GlobalSearch
    url: <global_search_alternate_endpoint_url>
  - name: GlobalTagging
    url: <global_tagging_alternate_endpoint_url>
# ...

    6. Optional: Set the publishing strategy to Internal:

      publish: Internal

      By setting this option, you create an internal Ingress Controller and a private load balancer.

      If you use the default value of External, your network must be able to access the public endpoint for IBM Cloud® Internet Services (CIS). CIS is not enabled for Virtual Private Endpoints.

  3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    The install-config.yaml file is consumed during the next step of the installation process. You must back it up now.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OKD cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

  • You have an existing install-config.yaml file.

  • You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

    The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

    For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and OpenStack, the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).
Procedure

  1. Edit your install-config.yaml file and add the proxy settings. For example:

    apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
  httpsProxy: https://<username>:<pswd>@<ip>:<port> (2)
  noProxy: example.com (3)
additionalTrustBundle: | (4)
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> (5)
    1 A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
    2 A proxy URL to use for creating HTTPS connections outside the cluster.
    3 A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
    4 If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Fedora CoreOS (FCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the FCOS trust bundle.
    5 Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.

    The installation program does not support the proxy readinessEndpoints field.

    If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

    $ ./openshift-install wait-for install-complete --log-level debug

  2. Save the file and reference it when installing OKD.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Only the Proxy object named cluster is supported, and no additional proxies can be created.
Additional resources

Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 1. Minimum resource requirements
Machine Operating System vCPU Virtual RAM Storage Input/Output Per Second (IOPS)

Bootstrap

FCOS

4

16 GB

100 GB

300

Control plane

FCOS

4

16 GB

100 GB

300

Compute

FCOS

2

8 GB

100 GB

300

As of OKD version 4.13, RHCOS is based on RHEL version 9.2, which updates the micro-architecture requirements. The following list contains the minimum instruction set architectures (ISA) that each architecture requires:

  • x86-64 architecture requires x86-64-v2 ISA

  • ARM64 architecture requires ARMv8.0-A ISA

  • IBM Power architecture requires Power 9 ISA

  • s390x architecture requires z14 ISA

For more information, see RHEL Architectures.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OKD.

Tested instance types for IBM Cloud

The following IBM Cloud® instance types have been tested with OKD.

Machine series

  • bx2-8x32

  • bx2d-4x16

  • bx3d-4x20

  • cx2-8x16

  • cx2d-4x8

  • cx3d-8x20

  • gx2-8x64x1v100

  • gx3-16x80x1l4

  • mx2-8x64

  • mx2d-4x32

  • mx3d-2x20

  • ox2-4x32

  • ox2-8x64

  • ux2d-2x56

  • vx2d-4x56

Sample customized install-config.yaml file for IBM Cloud

You can customize the install-config.yaml file to specify more details about your OKD cluster’s platform or modify the values of the required parameters.

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and then modify it.

 
apiVersion: v1
baseDomain: example.com (1)
controlPlane:  (2) (3)
  hyperthreading: Enabled (4)
  name: master
  platform:
    ibm-cloud: {}
  replicas: 3
compute:  (2) (3)
- hyperthreading: Enabled (4)
  name: worker
  platform:
    ibmcloud: {}
  replicas: 3
metadata:
  name: test-cluster (1)
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14 (5)
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16 (6)
  networkType: OVNKubernetes (7)
  serviceNetwork:
  - 172.30.0.0/16
platform:
  ibmcloud:
    region: us-east (1)
    resourceGroupName: us-east-example-cluster-rg (8)
    serviceEndpoints: (9)
      - name: IAM
        url: https://private.us-east.iam.cloud.ibm.com
      - name: VPC
        url: https://us-east.private.iaas.cloud.ibm.com/v1
      - name: ResourceController
        url: https://private.us-east.resource-controller.cloud.ibm.com
      - name: ResourceManager
        url: https://private.us-east.resource-controller.cloud.ibm.com
      - name: DNSServices
        url: https://api.private.dns-svcs.cloud.ibm.com/v1
      - name: COS
        url: https://s3.direct.us-east.cloud-object-storage.appdomain.cloud
      - name: GlobalSearch
        url: https://api.private.global-search-tagging.cloud.ibm.com
      - name: GlobalTagging
        url: https://tags.private.global-search-tagging.cloud.ibm.com
    networkResourceGroupName: us-east-example-existing-network-rg (10)
    vpcName: us-east-example-network-1 (11)
    controlPlaneSubnets: (12)
      - us-east-example-network-1-cp-us-east-1
      - us-east-example-network-1-cp-us-east-2
      - us-east-example-network-1-cp-us-east-3
    computeSubnets: (13)
      - us-east-example-network-1-compute-us-east-1
      - us-east-example-network-1-compute-us-east-2
      - us-east-example-network-1-compute-us-east-3
credentialsMode: Manual
pullSecret: '{"auths":{"<local_registry>": {"auth": "<credentials>","email": "you@example.com"}}}' (14)
sshKey: ssh-ed25519 AAAA... (15)
additionalTrustBundle: | (16)
  -----BEGIN CERTIFICATE-----
  <MY_TRUSTED_CA_CERT>
  -----END CERTIFICATE-----
imageContentSources: (17)
- mirrors:
  - <local_registry>/<local_repository_name>/release
  source: quay.io/openshift-release-dev/ocp-release
- mirrors:
  - <local_registry>/<local_repository_name>/release
  source: quay.io/openshift-release-dev/ocp-v4.0-art-dev
1 Required.
2 If you do not provide these parameters and values, the installation program provides the default value.
3 The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4 Enables or disables simultaneous multithreading, also known as Hyper-Threading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger machine types, such as n1-standard-8, for your machines if you disable simultaneous multithreading.
5 The machine CIDR must contain the subnets for the compute machines and control plane machines.
6 The CIDR must contain the subnets defined in platform.ibmcloud.controlPlaneSubnets and platform.ibmcloud.computeSubnets.
7 The cluster network plugin to install. The default value OVNKubernetes is the only supported value.
8 The name of an existing resource group. All installer-provisioned cluster resources are deployed to this resource group. If undefined, a new resource group is created for the cluster.
9 Based on the network restrictions of the VPC, specify alternate service endpoints as needed. This overrides the default public endpoint for the service.
10 Specify the name of the resource group that contains the existing virtual private cloud (VPC). The existing VPC and subnets should be in this resource group. The cluster will be installed to this VPC.
11 Specify the name of an existing VPC.
12 Specify the name of the existing subnets to which to deploy the control plane machines. The subnets must belong to the VPC that you specified. Specify a subnet for each availability zone in the region.
13 Specify the name of the existing subnets to which to deploy the compute machines. The subnets must belong to the VPC that you specified. Specify a subnet for each availability zone in the region.
14 For <local_registry>, specify the registry domain name, and optionally the port, that your mirror registry uses to serve content. For example, registry.example.com or registry.example.com:5000. For <credentials>, specify the base64-encoded user name and password for your mirror registry.
15 You can optionally provide the sshKey value that you use to access the machines in your cluster.
16 Provide the contents of the certificate file that you used for your mirror registry.
17 Provide these values from the metadata.name: release-0 section of the imageContentSourcePolicy.yaml file that was created when you mirrored the registry.

For production OKD clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OKD from a command-line interface. You can install oc on Linux, Windows, or macOS.

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OKD 4.15. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.tar.gz.

  3. Unpack the archive:

    $ tar xvf <file>

  4. Place the oc binary in a directory that is on your PATH.

    To check your PATH, execute the following command:

    $ echo $PATH
Verification

  • After you install the OpenShift CLI, it is available using the oc command:

    $ oc <command>

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.zip.

  3. Unzip the archive with a ZIP program.

  4. Move the oc binary to a directory that is on your PATH.

    To check your PATH, open the command prompt and execute the following command:

    C:\> path
Verification

  • After you install the OpenShift CLI, it is available using the oc command:

    C:\> oc <command>

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

  1. Navigate to https://mirror.openshift.com/pub/openshift-v4/clients/oc/latest/ and choose the folder for your operating system and architecture.

  2. Download oc.tar.gz.

  3. Unpack and unzip the archive.

  4. Move the oc binary to a directory on your PATH.

    To check your PATH, open a terminal and execute the following command:

    $ echo $PATH
Verification

  • Verify your installation by using an oc command:

    $ oc <command>

Manually creating IAM

Installing the cluster requires that the Cloud Credential Operator (CCO) operate in manual mode. While the installation program configures the CCO for manual mode, you must specify the identity and access management secrets for you cloud provider.

You can use the Cloud Credential Operator (CCO) utility (ccoctl) to create the required IBM Cloud® resources.

Prerequisites

  • You have configured the ccoctl binary.

  • You have an existing install-config.yaml file.

Procedure

  1. Edit the install-config.yaml configuration file so that it contains the credentialsMode parameter set to Manual.

    Example install-config.yaml configuration file
    apiVersion: v1
baseDomain: cluster1.example.com
credentialsMode: Manual (1)
compute:
- architecture: amd64
  hyperthreading: Enabled
    1 This line is added to set the credentialsMode parameter to Manual.

  2. To generate the manifests, run the following command from the directory that contains the installation program:

    $ ./openshift-install create manifests --dir <installation_directory>

  3. From the directory that contains the installation program, set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

    $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')

  4. Extract the list of CredentialsRequest custom resources (CRs) from the OKD release image by running the following command:

    $ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \(1)
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
  --to=<path_to_directory_for_credentials_requests> (3)
    1 The --included parameter includes only the manifests that your specific cluster configuration requires.
    2 Specify the location of the install-config.yaml file.
    3 Specify the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it.

    This command creates a YAML file for each CredentialsRequest object.

    Sample CredentialsRequest object
      apiVersion: cloudcredential.openshift.io/v1
  kind: CredentialsRequest
  metadata:
    labels:
      controller-tools.k8s.io: "1.0"
    name: openshift-image-registry-ibmcos
    namespace: openshift-cloud-credential-operator
  spec:
    secretRef:
      name: installer-cloud-credentials
      namespace: openshift-image-registry
    providerSpec:
      apiVersion: cloudcredential.openshift.io/v1
      kind: IBMCloudProviderSpec
      policies:
      - attributes:
        - name: serviceName
          value: cloud-object-storage
        roles:
        - crn:v1:bluemix:public:iam::::role:Viewer
        - crn:v1:bluemix:public:iam::::role:Operator
        - crn:v1:bluemix:public:iam::::role:Editor
        - crn:v1:bluemix:public:iam::::serviceRole:Reader
        - crn:v1:bluemix:public:iam::::serviceRole:Writer
      - attributes:
        - name: resourceType
          value: resource-group
        roles:
        - crn:v1:bluemix:public:iam::::role:Viewer

  5. Create the service ID for each credential request, assign the policies defined, create an API key, and generate the secret:

    $ ccoctl ibmcloud create-service-id \
  --credentials-requests-dir=<path_to_credential_requests_directory> \(1)
  --name=<cluster_name> \(2)
  --output-dir=<installation_directory> \(3)
  --resource-group-name=<resource_group_name> (4)
    1 Specify the directory containing the files for the component CredentialsRequest objects.
    2 Specify the name of the OKD cluster.
    3 Optional: Specify the directory in which you want the ccoctl utility to create objects. By default, the utility creates objects in the directory in which the commands are run.
    4 Optional: Specify the name of the resource group used for scoping the access policies.

    If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the --enable-tech-preview parameter.

    If an incorrect resource group name is provided, the installation fails during the bootstrap phase. To find the correct resource group name, run the following command:

    $ grep resourceGroupName <installation_directory>/manifests/cluster-infrastructure-02-config.yml
Verification

  • Ensure that the appropriate secrets were generated in your cluster’s manifests directory.

Deploying the cluster

You can install OKD on a compatible cloud platform.

You can run the create cluster command of the installation program only once, during initial installation.
Prerequisites

  • You have configured an account with the cloud platform that hosts your cluster.

  • You have the OKD installation program and the pull secret for your cluster.

    If the Fedora CoreOS (FCOS) image is available locally, the host running the installation program does not require internet access.

  • You have verified that the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.

Procedure

  1. Export the OPENSHIFT_INSTALL_OS_IMAGE_OVERRIDE variable to specify the location of the Fedora CoreOS (FCOS) image by running the following command:

    $ export OPENSHIFT_INSTALL_OS_IMAGE_OVERRIDE="<path_to_image>/rhcos-<image_version>-ibmcloud.x86_64.qcow2.gz"

  2. Change to the directory that contains the installation program and initialize the cluster deployment:

    $ ./openshift-install create cluster --dir <installation_directory> \ (1)
    --log-level=info (2)
    1 For <installation_directory>, specify the location of your customized ./install-config.yaml file.
    2 To view different installation details, specify warn, debug, or error instead of info.
Verification

When the cluster deployment completes successfully:

  • The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.

  • Credential information also outputs to <installation_directory>/.openshift_install.log.

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.
Example output
...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

  • The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

  • It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OKD installation.

Prerequisites

  • You deployed an OKD cluster.

  • You installed the oc CLI.

Procedure

  1. Export the kubeadmin credentials:

    $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
    1 For <installation_directory>, specify the path to the directory that you stored the installation files in.

  2. Verify you can run oc commands successfully using the exported configuration:

    $ oc whoami
    Example output
    system:admin
Additional resources

Post installation

Complete the following steps to complete the configuration of your cluster.

Disabling the default OperatorHub catalog sources

Operator catalogs that source content provided by Red Hat and community projects are configured for OperatorHub by default during an OKD installation. In a restricted network environment, you must disable the default catalogs as a cluster administrator.

Procedure

  • Disable the sources for the default catalogs by adding disableAllDefaultSources: true to the OperatorHub object:

    $ oc patch OperatorHub cluster --type json \
    -p '[{"op": "add", "path": "/spec/disableAllDefaultSources", "value": true}]'

Alternatively, you can use the web console to manage catalog sources. From the Administration → Cluster Settings → Configuration → OperatorHub page, click the Sources tab, where you can create, update, delete, disable, and enable individual sources.

Installing the policy resources into the cluster

Mirroring the OKD content using the oc-mirror OpenShift CLI (oc) plugin creates resources, which include catalogSource-certified-operator-index.yaml and imageContentSourcePolicy.yaml.

  • The ImageContentSourcePolicy resource associates the mirror registry with the source registry and redirects image pull requests from the online registries to the mirror registry.

  • The CatalogSource resource is used by Operator Lifecycle Manager (OLM) to retrieve information about the available Operators in the mirror registry, which lets users discover and install Operators.

After you install the cluster, you must install these resources into the cluster.

Prerequisites

  • You have mirrored the image set to the registry mirror in the disconnected environment.

  • You have access to the cluster as a user with the cluster-admin role.

Procedure

  1. Log in to the OpenShift CLI as a user with the cluster-admin role.

  2. Apply the YAML files from the results directory to the cluster:

    $ oc apply -f ./oc-mirror-workspace/results-<id>/
Verification

  1. Verify that the ImageContentSourcePolicy resources were successfully installed:

    $ oc get imagecontentsourcepolicy

  2. Verify that the CatalogSource resources were successfully installed:

    $ oc get catalogsource --all-namespaces
Additional resources

Next steps