$ oc annotate route <route_name> \ --overwrite haproxy.router.openshift.io/timeout=<timeout><time_unit> (1)
You can configure the default timeouts for an existing route when you have services in need of a low timeout, which is required for Service Level Availability (SLA) purposes, or a high timeout, for cases with a slow back end.
You need a deployed Ingress Controller on a running cluster.
Using the oc annotate
command, add the timeout to the route:
$ oc annotate route <route_name> \ --overwrite haproxy.router.openshift.io/timeout=<timeout><time_unit> (1)
1 | Supported time units are microseconds (us), milliseconds (ms), seconds (s), minutes (m), hours (h), or days (d). |
The following example sets a timeout of two seconds on a route named myroute
:
$ oc annotate route myroute --overwrite haproxy.router.openshift.io/timeout=2s
HTTP Strict Transport Security (HSTS) policy is a security enhancement, which ensures that only HTTPS traffic is allowed on the host. Any HTTP requests are dropped by default. This is useful for ensuring secure interactions with websites, or to offer a secure application for the user’s benefit.
When HSTS is enabled, HSTS adds a Strict Transport Security header to HTTPS
responses from the site. You can use the insecureEdgeTerminationPolicy
value
in a route to redirect to send HTTP to HTTPS. However, when HSTS is enabled, the
client changes all requests from the HTTP URL to HTTPS before the request is
sent, eliminating the need for a redirect. This is not required to be supported
by the client, and can be disabled by setting max-age=0
.
HSTS works only with secure routes (either edge terminated or re-encrypt). The configuration is ineffective on HTTP or passthrough routes. |
To enable HSTS on a route, add the haproxy.router.openshift.io/hsts_header
value to the edge terminated or re-encrypt route:
apiVersion: v1
kind: route
metadata:
annotations:
haproxy.router.openshift.io/hsts_header: max-age=31536000;includeSubDomains;preload (1) (2) (3)
1 | max-age is the only required parameter.
It measures the length of time, in seconds, that the
HSTS policy is in effect. The client updates max-age whenever a response
with a HSTS header is received from the host. When max-age times out, the
client discards the policy. |
2 | includeSubDomains is optional. When included, it tells the client
that all subdomains
of the host are to be treated the same as the host. |
3 | preload is optional. When max-age is greater than 0, then including
preload in haproxy.router.openshift.io/hsts_header allows external
services to include this site in their HSTS preload lists. For example, sites
such as Google can construct a list of sites that have preload set. Browsers
can then use these lists to determine which sites they can communicate with
over HTTPS,
before they have interacted with the site. Without preload set, browsers must
have interacted with the site over HTTPS to get the header. |
Sometimes applications deployed through OpenShift Container Platform can cause network throughput issues such as unusually high latency between specific services.
Use the following methods to analyze performance issues if Pod logs do not reveal any cause of the problem:
Use a packet analyzer, such as ping or tcpdump to analyze traffic between a Pod and its node.
For example, run the tcpdump tool on each Pod while reproducing the behavior that led to the issue. Review the captures on both sides to compare send and receive timestamps to analyze the latency of traffic to and from a Pod. Latency can occur in OpenShift Container Platform if a node interface is overloaded with traffic from other Pods, storage devices, or the data plane.
$ tcpdump -s 0 -i any -w /tmp/dump.pcap host <podip 1> && host <podip 2> (1)
1 | podip is the IP address for the Pod. Run the oc get pod <pod_name> -o wide command to get
the IP address of a Pod. |
tcpdump generates a file at /tmp/dump.pcap
containing all traffic between
these two Pods. Ideally, run the analyzer shortly
before the issue is reproduced and stop the analyzer shortly after the issue
is finished reproducing to minimize the size of the file.
You can also run a packet analyzer between the nodes (eliminating the SDN from
the equation) with:
$ tcpdump -s 0 -i any -w /tmp/dump.pcap port 4789
Use a bandwidth measuring tool, such as iperf, to measure streaming throughput and UDP throughput. Run the tool from the Pods first, then from the nodes, to locate any bottlenecks.
For information on installing and using iperf, see this Red Hat Solution.
OpenShift Container Platform provides sticky sessions, which enables stateful application traffic by ensuring all traffic hits the same endpoint. However, if the endpoint Pod terminates, whether through restart, scaling, or a change in configuration, this statefulness can disappear.
OpenShift Container Platform can use cookies to configure session persistence. The Ingress controller selects an endpoint to handle any user requests, and creates a cookie for the session. The cookie is passed back in the response to the request and the user sends the cookie back with the next request in the session. The cookie tells the Ingress Controller which endpoint is handling the session, ensuring that client requests use the cookie so that they are routed to the same Pod.
You can set a cookie name to overwrite the default, auto-generated one for the route. This allows the application receiving route traffic to know the cookie name. By deleting the cookie it can force the next request to re-choose an endpoint. So, if a server was overloaded it tries to remove the requests from the client and redistribute them.
Annotate the route with the desired cookie name:
$ oc annotate route <route_name> router.openshift.io/<cookie_name>="-<cookie_annotation>"
For example, to annotate the cookie name of my_cookie
to the my_route
with
the annotation of my_cookie_annotation
:
$ oc annotate route my_route router.openshift.io/my_cookie="-my_cookie_annotation"
Save the cookie, and access the route:
$ curl $my_route -k -c /tmp/my_cookie
The Ingress Controller can set the default options for all the routes it exposes. An individual route can override some of these defaults by providing specific configurations in its annotations.
Variable | Description | Environment variable used as default |
---|---|---|
|
Sets the load-balancing algorithm. Available options are |
|
|
Disables the use of cookies to track related connections. If set to |
|
|
Specifies an optional cookie to use for this route. The name must consist of any combination of upper and lower case letters, digits, "_", and "-". The default is the hashed internal key name for the route. |
|
|
Sets the maximum number of connections that are allowed to a backing pod from a router. Note: if there are multiple pods, each can have this many connections. But if you have multiple routers, there is no coordination among them, each may connect this many times. If not set, or set to 0, there is no limit. |
|
|
Setting |
|
|
Limits the number of concurrent TCP connections shared by an IP address. |
|
|
Limits the rate at which an IP address can make HTTP requests. |
|
|
Limits the rate at which an IP address can make TCP connections. |
|
|
Sets a server-side timeout for the route. (TimeUnits) |
|
|
Sets the interval for the back-end health checks. (TimeUnits) |
|
|
Sets a whitelist for the route. |
|
|
Sets a Strict-Transport-Security header for the edge terminated or re-encrypt route. |
Environment variables can not be edited. |
apiVersion: v1
kind: route
metadata:
annotations:
haproxy.router.openshift.io/timeout: 5500ms (1)
...
1 | Specifies the new timeout with HAProxy supported units (us , ms , s , m , h , d ). If the unit is not provided, ms is the default. |
Setting a server-side timeout value for passthrough routes too low can cause WebSocket connections to timeout frequently on that route. |