This is a cache of https://docs.openshift.com/container-platform/4.12/service_mesh/v2x/ossm-security.html. It is a snapshot of the page at 2024-11-04T13:17:14.794+0000.
Security - Service Mesh 2.x | Service Mesh | OpenShift Container Platform 4.12
  1. Documentation
    2. history bug_report picture_as_pdf
×

Security

If your service mesh application is constructed with a complex array of microservices, you can use Red Hat OpenShift Service Mesh to customize the security of the communication between those services. The infrastructure of OpenShift Container Platform along with the traffic management features of Service Mesh help you manage the complexity of your applications and secure microservices.

Before you begin

If you have a project, add your project to the ServiceMeshMemberRoll resource.

If you don’t have a project, install the Bookinfo sample application and add it to the ServiceMeshMemberRoll resource. The sample application helps illustrate security concepts.

About mutual Transport Layer Security (mTLS)

Mutual Transport Layer Security (mTLS) is a protocol that enables two parties to authenticate each other. It is the default mode of authentication in some protocols (IKE, SSH) and optional in others (TLS). You can use mTLS without changes to the application or service code. The TLS is handled entirely by the service mesh infrastructure and between the two sidecar proxies.

By default, mTLS in Red Hat OpenShift Service Mesh is enabled and set to permissive mode, where the sidecars in Service Mesh accept both plain-text traffic and connections that are encrypted using mTLS. If a service in your mesh configured to use strict mTLS is communicating with a service outside the mesh, communication might break between those services because strict mTLS requires both the client and the server to be able to verify the identify of each other. Use permissive mode while you migrate your workloads to Service Mesh. Then, you can enable strict mTLS across your mesh, namespace, or application.

Enabling mTLS across your mesh at the Service Mesh control plane level secures all the traffic in your service mesh without rewriting your applications and workloads. You can secure namespaces in your mesh at the data plane level in the ServiceMeshControlPlane resource. To customize traffic encryption connections, configure namespaces at the application level with PeerAuthentication and DestinationRule resources.

Enabling strict mTLS across the service mesh

If your workloads do not communicate with outside services, you can quickly enable mTLS across your mesh without communication interruptions. You can enable it by setting spec.security.dataPlane.mtls to true in the ServiceMeshControlPlane resource. The Operator creates the required resources.

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  version: v2.5
  security:
    dataPlane:
      mtls: true

You can also enable mTLS by using the OpenShift Container Platform web console.

Procedure

  1. Log in to the web console.

  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.

  3. Click Operators → Installed Operators.

  4. Click Service Mesh Control Plane under Provided APIs.

  5. Click the name of your ServiceMeshControlPlane resource, for example, basic.

  6. On the Details page, click the toggle in the Security section for Data Plane Security.

Configuring sidecars for incoming connections for specific services

You can also configure mTLS for individual services by creating a policy.

Procedure

  1. Create a YAML file using the following example.

    PeerAuthentication Policy example policy.yaml
    apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: default
  namespace: <namespace>
spec:
  mtls:
    mode: STRICT

    1. Replace <namespace> with the namespace where the service is located.

  2. Run the following command to create the resource in the namespace where the service is located. It must match the namespace field in the Policy resource you just created.

    $ oc create -n <namespace> -f <policy.yaml>

If you are not using automatic mTLS and you are setting PeerAuthentication to STRICT, you must create a DestinationRule resource for your service.

Configuring sidecars for outgoing connections

Create a destination rule to configure Service Mesh to use mTLS when sending requests to other services in the mesh.

Procedure

  1. Create a YAML file using the following example.

    DestinationRule example destination-rule.yaml
    apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: default
  namespace: <namespace>
spec:
  host: "*.<namespace>.svc.cluster.local"
  trafficPolicy:
   tls:
    mode: ISTIO_MUTUAL

    1. Replace <namespace> with the namespace where the service is located.

  2. Run the following command to create the resource in the namespace where the service is located. It must match the namespace field in the DestinationRule resource you just created.

    $ oc create -n <namespace> -f <destination-rule.yaml>

Setting the minimum and maximum protocol versions

If your environment has specific requirements for encrypted traffic in your service mesh, you can control the cryptographic functions that are allowed by setting the spec.security.controlPlane.tls.minProtocolVersion or spec.security.controlPlane.tls.maxProtocolVersion in your ServiceMeshControlPlane resource. Those values, configured in your Service Mesh control plane resource, define the minimum and maximum TLS version used by mesh components when communicating securely over TLS.

The default is TLS_AUTO and does not specify a version of TLS.

Table 1. Valid values
Value Description

TLS_AUTO

default

TLSv1_0

TLS version 1.0

TLSv1_1

TLS version 1.1

TLSv1_2

TLS version 1.2

TLSv1_3

TLS version 1.3
Procedure

  1. Log in to the web console.

  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.

  3. Click Operators → Installed Operators.

  4. Click Service Mesh Control Plane under Provided APIs.

  5. Click the name of your ServiceMeshControlPlane resource, for example, basic.

  6. Click the YAML tab.

  7. Insert the following code snippet in the YAML editor. Replace the value in the minProtocolVersion with the TLS version value. In this example, the minimum TLS version is set to TLSv1_2.

    ServiceMeshControlPlane snippet
    kind: ServiceMeshControlPlane
spec:
  security:
    controlPlane:
      tls:
        minProtocolVersion: TLSv1_2

  8. Click Save.

  9. Click Refresh to verify that the changes updated correctly.

Validating encryption with Kiali

The Kiali console offers several ways to validate whether or not your applications, services, and workloads have mTLS encryption enabled.

mTLS enabled
Figure 1. Masthead icon mesh-wide mTLS enabled

At the right side of the masthead, Kiali shows a lock icon when the mesh has strictly enabled mTLS for the whole service mesh. It means that all communications in the mesh use mTLS.

mTLS partially enabled
Figure 2. Masthead icon mesh-wide mTLS partially enabled

Kiali displays a hollow lock icon when either the mesh is configured in PERMISSIVE mode or there is a error in the mesh-wide mTLS configuration.

Security badge
Figure 3. Security badge

The Graph page has the option to display a Security badge on the graph edges to indicate that mTLS is enabled. To enable security badges on the graph, from the Display menu, under Show Badges, select the Security checkbox. When an edge shows a lock icon, it means at least one request with mTLS enabled is present. In case there are both mTLS and non-mTLS requests, the side-panel will show the percentage of requests that use mTLS.

The Applications Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present.

The Workloads Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present.

The Services Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present. Also note that Kiali displays a lock icon in the Network section next to ports that are configured for mTLS.

Configuring Role Based Access Control (RBAC)

Role-based access control (RBAC) objects determine whether a user or service is allowed to perform a given action within a project. You can define mesh-, namespace-, and workload-wide access control for your workloads in the mesh.

To configure RBAC, create an AuthorizationPolicy resource in the namespace for which you are configuring access. If you are configuring mesh-wide access, use the project where you installed the Service Mesh control plane, for example istio-system.

For example, with RBAC, you can create policies that:

  • Configure intra-project communication.

  • Allow or deny full access to all workloads in the default namespace.

  • Allow or deny ingress gateway access.

  • Require a token for access.

An authorization policy includes a selector, an action, and a list of rules:

  • The selector field specifies the target of the policy.

  • The action field specifies whether to allow or deny the request.

  • The rules field specifies when to trigger the action.

    • The from field specifies constraints on the request origin.

    • The to field specifies constraints on request target and parameters.

    • The when field specifies additional conditions that to apply the rule.

Procedure

  1. Create your AuthorizationPolicy resource. The following example shows a resource that updates the ingress-policy AuthorizationPolicy to deny an IP address from accessing the ingress gateway.

    apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: ingress-policy
  namespace: istio-system
spec:
  selector:
    matchLabels:
      app: istio-ingressgateway
  action: DENY
  rules:
  - from:
    - source:
        ipBlocks: ["1.2.3.4"]

  2. Run the following command after you write your resource to create your resource in your namespace. The namespace must match your metadata.namespace field in your AuthorizationPolicy resource.

    $ oc create -n istio-system -f <filename>
Next steps

Consider the following examples for other common configurations.

Configure intra-project communication

You can use AuthorizationPolicy to configure your Service Mesh control plane to allow or deny the traffic communicating with your mesh or services in your mesh.

Restrict access to services outside a namespace

You can deny requests from any source that is not in the bookinfo namespace with the following AuthorizationPolicy resource example.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
 name: httpbin-deny
 namespace: bookinfo
spec:
 selector:
   matchLabels:
     app: httpbin
     version: v1
 action: DENY
 rules:
 - from:
   - source:
       notNamespaces: ["bookinfo"]

Creating allow-all and default deny-all authorization policies

The following example shows an allow-all authorization policy that allows full access to all workloads in the bookinfo namespace.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: allow-all
  namespace: bookinfo
spec:
  action: ALLOW
  rules:
  - {}

The following example shows a policy that denies any access to all workloads in the bookinfo namespace.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: deny-all
  namespace: bookinfo
spec:
  {}

Allow or deny access to the ingress gateway

You can set an authorization policy to add allow or deny lists based on IP addresses.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: ingress-policy
  namespace: istio-system
spec:
  selector:
    matchLabels:
      app: istio-ingressgateway
  action: ALLOW
  rules:
  - from:
    - source:
       ipBlocks: ["1.2.3.4", "5.6.7.0/24"]

Restrict access with JSON Web Token

You can restrict what can access your mesh with a JSON Web Token (JWT). After authentication, a user or service can access routes, services that are associated with that token.

Create a RequestAuthentication resource, which defines the authentication methods that are supported by a workload. The following example accepts a JWT issued by http://localhost:8080/auth/realms/master.

apiVersion: "security.istio.io/v1beta1"
kind: "RequestAuthentication"
metadata:
  name: "jwt-example"
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: httpbin
  jwtRules:
  - issuer: "http://localhost:8080/auth/realms/master"
    jwksUri: "http://keycloak.default.svc:8080/auth/realms/master/protocol/openid-connect/certs"

Then, create an AuthorizationPolicy resource in the same namespace to work with RequestAuthentication resource you created. The following example requires a JWT to be present in the Authorization header when sending a request to httpbin workloads.

apiVersion: "security.istio.io/v1beta1"
kind: "AuthorizationPolicy"
metadata:
  name: "frontend-ingress"
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: httpbin
  action: DENY
  rules:
  - from:
    - source:
        notRequestPrincipals: ["*"]

Configuring cipher suites and ECDH curves

Cipher suites and Elliptic-curve Diffie–Hellman (ECDH curves) can help you secure your service mesh. You can define a comma separated list of cipher suites using spec.security.controlplane.tls.cipherSuites and ECDH curves using spec.security.controlplane.tls.ecdhCurves in your ServiceMeshControlPlane resource. If either of these attributes are empty, then the default values are used.

The cipherSuites setting is effective if your service mesh uses TLS 1.2 or earlier. It has no effect when negotiating with TLS 1.3.

Set your cipher suites in the comma separated list in order of priority. For example, ecdhCurves: CurveP256, CurveP384 sets CurveP256 as a higher priority than CurveP384.

You must include either TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 or TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 when you configure the cipher suite. HTTP/2 support requires at least one of these cipher suites.

The supported cipher suites are:

  • TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256

  • TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256

  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256

  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256

  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384

  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384

  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256

  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA

  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256

  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA

  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA

  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA

  • TLS_RSA_WITH_AES_128_GCM_SHA256

  • TLS_RSA_WITH_AES_256_GCM_SHA384

  • TLS_RSA_WITH_AES_128_CBC_SHA256

  • TLS_RSA_WITH_AES_128_CBC_SHA

  • TLS_RSA_WITH_AES_256_CBC_SHA

  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA

  • TLS_RSA_WITH_3DES_EDE_CBC_SHA

The supported ECDH Curves are:

  • CurveP256

  • CurveP384

  • CurveP521

  • X25519

Configuring JSON Web Key Sets resolver certificate authority

You can configure your own JSON Web Key Sets (JWKS) resolver certificate authority (CA) from the ServiceMeshControlPlane (SMCP) spec.

Procedure

  1. Edit the ServiceMeshControlPlane spec file:

    $ oc edit smcp <smcp-name>

  2. Enable mtls for the data plane by setting the value of the mtls field to true in the ServiceMeshControlPlane spec, as shown in the following example:

    spec:
  security:
    dataPlane:
        mtls: true # enable mtls for data plane
    # JWKSResolver extra CA
    # PEM-encoded certificate content to trust an additional CA
    jwksResolverCA: |
        -----BEGIN CERTIFICATE-----
        [...]
        [...]
        -----END CERTIFICATE-----
...

  3. Save the changes. OpenShift Container Platform automatically applies them.

A ConfigMap such as pilot-jwks-cacerts-<SMCP name> is created with the CA .pem data.

Example ConfigMap pilot-jwks-cacerts-<SMCP name>
kind: ConfigMap
apiVersion: v1
data:
  extra.pem: |
      -----BEGIN CERTIFICATE-----
      [...]
      [...]
      -----END CERTIFICATE-----

Adding an external certificate authority key and certificate

By default, Red Hat OpenShift Service Mesh generates a self-signed root certificate and key and uses them to sign the workload certificates. You can also use the user-defined certificate and key to sign workload certificates with user-defined root certificate. This task demonstrates an example to plug certificates and key into Service Mesh.

Prerequisites

  • Install Red Hat OpenShift Service Mesh with mutual TLS enabled to configure certificates.

  • This example uses the certificates from the Maistra repository. For production, use your own certificates from your certificate authority.

  • Deploy the Bookinfo sample application to verify the results with these instructions.

  • OpenSSL is required to verify certificates.

Adding an existing certificate and key

To use an existing signing (CA) certificate and key, you must create a chain of trust file that includes the CA certificate, key, and root certificate. You must use the following exact file names for each of the corresponding certificates. The CA certificate is named ca-cert.pem, the key is ca-key.pem, and the root certificate, which signs ca-cert.pem, is named root-cert.pem. If your workload uses intermediate certificates, you must specify them in a cert-chain.pem file.

  1. Save the example certificates from the Maistra repository locally and replace <path> with the path to your certificates.

  2. Create a secret named cacert that includes the input files ca-cert.pem, ca-key.pem, root-cert.pem and cert-chain.pem.

    $ oc create secret generic cacerts -n istio-system --from-file=<path>/ca-cert.pem \
    --from-file=<path>/ca-key.pem --from-file=<path>/root-cert.pem \
    --from-file=<path>/cert-chain.pem

  3. In the ServiceMeshControlPlane resource set spec.security.dataPlane.mtls true to true and configure the certificateAuthority field as shown in the following example. The default rootCADir is /etc/cacerts. You do not need to set the privateKey if the key and certs are mounted in the default location. Service Mesh reads the certificates and key from the secret-mount files.

    apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  security:
    dataPlane:
      mtls: true
    certificateAuthority:
      type: Istiod
      istiod:
        type: PrivateKey
        privateKey:
          rootCADir: /etc/cacerts

  4. After creating/changing/deleting the cacert secret, the Service Mesh control plane istiod and gateway pods must be restarted so the changes go into effect. Use the following command to restart the pods:

    $ oc -n istio-system delete pods -l 'app in (istiod,istio-ingressgateway, istio-egressgateway)'

    The Operator will automatically recreate the pods after they have been deleted.

  5. Restart the bookinfo application pods so that the sidecar proxies pick up the secret changes. Use the following command to restart the pods:

    $ oc -n bookinfo delete pods --all

    You should see output similar to the following:

    pod "details-v1-6cd699df8c-j54nh" deleted
pod "productpage-v1-5ddcb4b84f-mtmf2" deleted
pod "ratings-v1-bdbcc68bc-kmng4" deleted
pod "reviews-v1-754ddd7b6f-lqhsv" deleted
pod "reviews-v2-675679877f-q67r2" deleted
pod "reviews-v3-79d7549c7-c2gjs" deleted

  6. Verify that the pods were created and are ready with the following command:

    $ oc get pods -n bookinfo

Verifying your certificates

Use the Bookinfo sample application to verify that the workload certificates are signed by the certificates that were plugged into the CA. This process requires that you have openssl installed on your machine.

  1. To extract certificates from bookinfo workloads use the following command:

    $ sleep 60
$ oc -n bookinfo exec "$(oc -n bookinfo get pod -l app=productpage -o jsonpath={.items..metadata.name})" -c istio-proxy -- openssl s_client -showcerts -connect details:9080 > bookinfo-proxy-cert.txt
$ sed -n '/-----BEGIN CERTIFICATE-----/{:start /-----END CERTIFICATE-----/!{N;b start};/.*/p}' bookinfo-proxy-cert.txt > certs.pem
$ awk 'BEGIN {counter=0;} /BEGIN CERT/{counter++} { print > "proxy-cert-" counter ".pem"}' < certs.pem

    After running the command, you should have three files in your working directory: proxy-cert-1.pem, proxy-cert-2.pem and proxy-cert-3.pem.

  2. Verify that the root certificate is the same as the one specified by the administrator. Replace <path> with the path to your certificates.

    $ openssl x509 -in <path>/root-cert.pem -text -noout > /tmp/root-cert.crt.txt

    Run the following syntax at the terminal window.

    $ openssl x509 -in ./proxy-cert-3.pem -text -noout > /tmp/pod-root-cert.crt.txt

    Compare the certificates by running the following syntax at the terminal window.

    $ diff -s /tmp/root-cert.crt.txt /tmp/pod-root-cert.crt.txt

    You should see the following result: Files /tmp/root-cert.crt.txt and /tmp/pod-root-cert.crt.txt are identical

  3. Verify that the CA certificate is the same as the one specified by the administrator. Replace <path> with the path to your certificates.

    $ openssl x509 -in <path>/ca-cert.pem -text -noout > /tmp/ca-cert.crt.txt

    Run the following syntax at the terminal window.

    $ openssl x509 -in ./proxy-cert-2.pem -text -noout > /tmp/pod-cert-chain-ca.crt.txt

    Compare the certificates by running the following syntax at the terminal window.

    $ diff -s /tmp/ca-cert.crt.txt /tmp/pod-cert-chain-ca.crt.txt

    You should see the following result: Files /tmp/ca-cert.crt.txt and /tmp/pod-cert-chain-ca.crt.txt are identical.

  4. Verify the certificate chain from the root certificate to the workload certificate. Replace <path> with the path to your certificates.

    $ openssl verify -CAfile <(cat <path>/ca-cert.pem <path>/root-cert.pem) ./proxy-cert-1.pem

    You should see the following result: ./proxy-cert-1.pem: OK

Removing the certificates

To remove the certificates you added, follow these steps.

  1. Remove the secret cacerts. In this example, istio-system is the name of the Service Mesh control plane project.

    $ oc delete secret cacerts -n istio-system

  2. Redeploy Service Mesh with a self-signed root certificate in the ServiceMeshControlPlane resource.

    apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  security:
    dataPlane:
      mtls: true

About integrating Service Mesh with cert-manager and istio-csr

The cert-manager tool is a solution for X.509 certificate management on Kubernetes. It delivers a unified API to integrate applications with private or public key infrastructure (PKI), such as Vault, Google Cloud Certificate Authority Service, Let’s Encrypt, and other providers.

The cert-manager tool ensures the certificates are valid and up-to-date by attempting to renew certificates at a configured time before they expire.

For Istio users, cert-manager also provides integration with istio-csr, which is a certificate authority (CA) server that handles certificate signing requests (CSR) from Istio proxies. The server then delegates signing to cert-manager, which forwards CSRs to the configured CA server.

Red Hat provides support for integrating with istio-csr and cert-manager. Red Hat does not provide direct support for the istio-csr or the community cert-manager components. The use of community cert-manager shown here is for demonstration purposes only.
Prerequisites

  • One of these versions of cert-manager:

    • cert-manager Operator for Red Hat OpenShift 1.10 or later

    • community cert-manager Operator 1.11 or later

    • cert-manager 1.11 or later

  • OpenShift Service Mesh Operator 2.4 or later

  • istio-csr 0.6.0 or later

To avoid creating config maps in all namespaces when the istio-csr server is installed with the jetstack/cert-manager-istio-csr Helm chart, use the following setting: app.controller.configmapNamespaceSelector: "maistra.io/member-of: <istio-namespace>" in the istio-csr.yaml file.

Installing cert-manager

You can install the cert-manager tool to manage the lifecycle of TLS certificates and ensure that they are valid and up-to-date. If you are running Istio in your environment, you can also install the istio-csr certificate authority (CA) server, which handles certificate signing requests (CSR) from Istio proxies. The istio-csr CA delegates signing to the cert-manager tool, which delegates to the configured CA.

Procedure

  1. Create the root cluster issuer:

    Example cluster-issuer.yaml
    apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
  name: selfsigned-root-issuer
  namespace: cert-manager
spec:
  selfSigned: {}
---
apiVersion: cert-manager.io/v1
kind: Certificate
metadata:
  name: root-ca
  namespace: cert-manager
spec:
  isCA: true
  duration: 21600h # 900d
  secretName: root-ca
  commonName: root-ca.my-company.net
  subject:
    organizations:
    - my-company.net
  issuerRef:
    name: selfsigned-root-issuer
    kind: Issuer
    group: cert-manager.io
---
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
  name: root-ca
spec:
  ca:
    secretName: root-ca
    The namespace of the selfsigned-root-issuer issuer and root-ca certificate is cert-manager because root-ca is a cluster issuer, so the cert-manager looks for a referenced secret in its own namespace. The namespace is called cert-manager in the case of the cert-manager Operator for Red Hat OpenShift.

    1. Create the object by using the following command:

      $ oc apply -f cluster-issuer.yaml

    2. Create the istio-ca object as in the following example:

      Example istio-ca.yaml
      apiVersion: cert-manager.io/v1
kind: Certificate
metadata:
  name: istio-ca
  namespace: istio-system
spec:
  isCA: true
  duration: 21600h
  secretName: istio-ca
  commonName: istio-ca.my-company.net
  subject:
    organizations:
    - my-company.net
  issuerRef:
    name: root-ca
    kind: ClusterIssuer
    group: cert-manager.io
---
apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
  name: istio-ca
  namespace: istio-system
spec:
  ca:
    secretName: istio-ca

    3. Use the following command to create the object:

      $ oc apply -n istio-system -f istio-ca.yaml

  2. Install istio-csr:

    $ helm install istio-csr jetstack/cert-manager-istio-csr \
    -n istio-system \
    -f deploy/examples/cert-manager/istio-csr/istio-csr.yaml
    Example istio-csr.yaml
    replicaCount: 2

image:
  repository: quay.io/jetstack/cert-manager-istio-csr
  tag: v0.6.0
  pullSecretName: ""

app:
  certmanager:
    namespace: istio-system
    issuer:
      group: cert-manager.io
      kind: Issuer
      name: istio-ca

  controller:
    configmapNamespaceSelector: "maistra.io/member-of=istio-system"
    leaderElectionNamespace: istio-system

  istio:
    namespace: istio-system
    revisions: ["basic"]

  server:
    maxCertificateDuration: 5m

  tls:
    certificateDNSNames:
    # This DNS name must be set in the SMCP spec.security.certificateAuthority.cert-manager.address
    - cert-manager-istio-csr.istio-system.svc

  3. Deploy SMCP:

    $ oc apply -f mesh.yaml -n istio-system
    Example mesh.yaml
    apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  addons:
    grafana:
      enabled: false
    kiali:
      enabled: false
    prometheus:
      enabled: false
  proxy:
    accessLogging:
      file:
        name: /dev/stdout
  security:
    certificateAuthority:
      cert-manager:
        address: cert-manager-istio-csr.istio-system.svc:443
      type: cert-manager
    dataPlane:
      mtls: true
    identity:
      type: ThirdParty
  tracing:
    type: None
---
apiVersion: maistra.io/v1
kind: ServiceMeshMemberRoll
metadata:
  name: default
spec:
  members:
  - httpbin
  - sleep
security.identity.type: ThirdParty must be set when security.certificateAuthority.type: cert-manager is configured.
Verification

Use the sample httpbin service and sleep app to check mTLS traffic from ingress gateways and verify that the cert-manager tool is installed.

  1. Deploy the HTTP and sleep apps:

    $ oc new-project <namespace>
    $ oc apply -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/httpbin/httpbin.yaml
    $ oc apply -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/sleep/sleep.yaml

  2. Verify that sleep can access the httpbin service:

    $ oc exec "$(oc get pod -l app=sleep -n <namespace> \
   -o jsonpath={.items..metadata.name})" -c sleep -n <namespace> -- \
   curl http://httpbin.<namespace>:8000/ip -s -o /dev/null \
   -w "%{http_code}\n"
    Example output:
    200

  3. Check mTLS traffic from the ingress gateway to the httpbin service:

    $ oc apply -n <namespace> -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/httpbin/httpbin-gateway.yaml

  4. Get the istio-ingressgateway route:

    INGRESS_HOST=$(oc -n istio-system get routes istio-ingressgateway -o jsonpath='{.spec.host}')

  5. Verify mTLS traffic from the ingress gateway to the httpbin service:

    $ curl -s -I http://$INGRESS_HOST/headers -o /dev/null -w "%{http_code}" -s

Additional resources

For information about how to install the cert-manager Operator for OpenShift Container Platform, see: Installing the cert-manager Operator for Red Hat OpenShift.