This is a cache of https://docs.okd.io/4.14/networking/configuring_ingress_cluster_traffic/overview-traffic.html. It is a snapshot of the page at 2024-11-22T05:25:41.672+0000.
Overview - Configuring ingress cluster traffic | Networking | OKD 4.14
  1. Documentation
×

Configuring ingress cluster traffic overview

OKD provides the following methods for communicating from outside the cluster with services running in the cluster.

The methods are recommended, in order or preference:

  • If you have HTTP/HTTPS, use an Ingress Controller.

  • If you have a TLS-encrypted protocol other than HTTPS. For example, for TLS with the SNI header, use an Ingress Controller.

  • Otherwise, use a Load Balancer, an External IP, or a nodeport.

Method Purpose

Use an Ingress Controller

Allows access to HTTP/HTTPS traffic and TLS-encrypted protocols other than HTTPS (for example, TLS with the SNI header).

Automatically assign an external IP using a load balancer service

Allows traffic to non-standard ports through an IP address assigned from a pool. Most cloud platforms offer a method to start a service with a load-balancer IP address.

About MetalLB and the MetalLB Operator

Allows traffic to a specific IP address or address from a pool on the machine network. For bare-metal installations or platforms that are like bare metal, MetalLB provides a way to start a service with a load-balancer IP address.

Manually assign an external IP to a service

Allows traffic to non-standard ports through a specific IP address.

Configure a nodeport

Expose a service on all nodes in the cluster.

Comparision: Fault tolerant access to external IP addresses

For the communication methods that provide access to an external IP address, fault tolerant access to the IP address is another consideration. The following features provide fault tolerant access to an external IP address.

IP failover

IP failover manages a pool of virtual IP address for a set of nodes. It is implemented with Keepalived and Virtual Router Redundancy Protocol (VRRP). IP failover is a layer 2 mechanism only and relies on multicast. Multicast can have disadvantages for some networks.

MetalLB

MetalLB has a layer 2 mode, but it does not use multicast. Layer 2 mode has a disadvantage that it transfers all traffic for an external IP address through one node.

Manually assigning external IP addresses

You can configure your cluster with an IP address block that is used to assign external IP addresses to services. By default, this feature is disabled. This feature is flexible, but places the largest burden on the cluster or network administrator. The cluster is prepared to receive traffic that is destined for the external IP, but each customer has to decide how they want to route traffic to nodes.