This is a cache of https://docs.okd.io/4.17/backup_and_restore/application_backup_and_restore/installing/installing-oadp-aws.html. It is a snapshot of the page at 2026-01-21T01:41:02.706+0000.
Configuring OADP with AWS S3 compatible storage - OADP Application backup and restore | Backup and restore | OKD 4.17
  1. Documentation
×

Configuring the OpenShift API for Data Protection with AWS S3 compatible storage

You install the OpenShift API for Data Protection (OADP) with Amazon Web Services (AWS) S3 compatible storage by installing the OADP Operator. The Operator installs Velero 1.14.

Starting from OADP 1.0.4, all OADP 1.0.z versions can only be used as a dependency of the Migration Toolkit for Containers Operator and are not available as a standalone Operator.

You configure AWS for Velero, create a default Secret, and then install the Data Protection Application. For more details, see Installing the OADP Operator.

To install the OADP Operator in a restricted network environment, you must first disable the default OperatorHub sources and mirror the Operator catalog. See Using Operator Lifecycle Manager in disconnected environments for details.

About Amazon Simple Storage Service, Identity and Access Management, and GovCloud

Review Amazon Simple Storage Service (S3), Identity and Access Management (IAM), and AWS GovCloud requirements to configure backup storage with appropriate security controls. This helps you meet federal data security requirements and use correct endpoints.

AWS S3 is a storage solution of Amazon for the internet. As an authorized user, you can use this service to store and retrieve any amount of data whenever you want, from anywhere on the web.

You securely control access to Amazon S3 and other Amazon services by using the AWS Identity and Access Management (IAM) web service.

You can use IAM to manage permissions that control which AWS resources users can access. You use IAM to both authenticate, or verify that a user is who they claim to be, and to authorize, or grant permissions to use resources.

AWS GovCloud (US) is an Amazon storage solution developed to meet the stringent and specific data security requirements of the United States Federal Government. AWS GovCloud (US) works the same as Amazon S3 except for the following:

  • You cannot copy the contents of an Amazon S3 bucket in the AWS GovCloud (US) regions directly to or from another AWS region.

  • If you use Amazon S3 policies, use the AWS GovCloud (US) Amazon Resource Name (ARN) identifier to unambiguously specify a resource across all of AWS, such as in IAM policies, Amazon S3 bucket names, and API calls.

    • In AWS GovCloud (US) regions, ARNs have an identifier that is different from the one in other standard AWS regions, arn:aws-us-gov. If you need to specify the US-West or US-East region, use one the following ARNs:

      • For US-West, use us-gov-west-1.

      • For US-East, use us-gov-east-1.

    • For all other standard regions, ARNs begin with: arn:aws.

  • In AWS GovCloud (US) regions, use the endpoints listed in the AWS GovCloud (US-East) and AWS GovCloud (US-West) rows of the "Amazon S3 endpoints" table on Amazon Simple Storage Service endpoints and quotas. If you are processing export-controlled data, use one of the SSL/TLS endpoints. If you have FIPS requirements, use a FIPS 140-2 endpoint such as https://s3-fips.us-gov-west-1.amazonaws.com or https://s3-fips.us-gov-east-1.amazonaws.com.

  • To find the other AWS-imposed restrictions, see How Amazon Simple Storage Service Differs for AWS GovCloud (US).

Configuring Amazon Web Services

Configure Amazon Web Services (AWS) S3 storage and Identity and Access Management (IAM) credentials for backup storage with OADP. This provides the necessary permissions and storage infrastructure for data protection operations.

Prerequisites

  • You must have the AWS CLI installed.

Procedure

  1. Set the BUCKET variable:

    $ BUCKET=<your_bucket>

  2. Set the REGION variable:

    $ REGION=<your_region>

  3. Create an AWS S3 bucket:

    $ aws s3api create-bucket \
    --bucket $BUCKET \
    --region $REGION \
    --create-bucket-configuration LocationConstraint=$REGION

    where:

    LocationConstraint

    Specifies the bucket configuration location constraint. us-east-1 does not support LocationConstraint. If your region is us-east-1, omit --create-bucket-configuration LocationConstraint=$REGION.

  4. Create an IAM user:

    $ aws iam create-user --user-name velero

    where:

    velero

    Specifies the user name. If you want to use Velero to back up multiple clusters with multiple S3 buckets, create a unique user name for each cluster.

  5. Create a velero-policy.json file:

    $ cat > velero-policy.json <<EOF
{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": [
                "ec2:DescribeVolumes",
                "ec2:DescribeSnapshots",
                "ec2:CreateTags",
                "ec2:CreateVolume",
                "ec2:CreateSnapshot",
                "ec2:DeleteSnapshot"
            ],
            "Resource": "*"
        },
        {
            "Effect": "Allow",
            "Action": [
                "s3:GetObject",
                "s3:DeleteObject",
                "s3:PutObject",
                "s3:AbortMultipartUpload",
                "s3:ListMultipartUploadParts"
            ],
            "Resource": [
                "arn:aws:s3:::${BUCKET}/*"
            ]
        },
        {
            "Effect": "Allow",
            "Action": [
                "s3:ListBucket",
                "s3:GetBucketLocation",
                "s3:ListBucketMultipartUploads"
            ],
            "Resource": [
                "arn:aws:s3:::${BUCKET}"
            ]
        }
    ]
}
EOF

  6. Attach the policies to give the velero user the minimum necessary permissions:

    $ aws iam put-user-policy \
  --user-name velero \
  --policy-name velero \
  --policy-document file://velero-policy.json

  7. Create an access key for the velero user:

    $ aws iam create-access-key --user-name velero
    {
  "AccessKey": {
        "UserName": "velero",
        "Status": "Active",
        "CreateDate": "2017-07-31T22:24:41.576Z",
        "SecretAccessKey": <AWS_SECRET_ACCESS_KEY>,
        "AccessKeyId": <AWS_ACCESS_KEY_ID>
  }
}

  8. Create a credentials-velero file:

    $ cat << EOF > ./credentials-velero
[default]
aws_access_key_id=<AWS_ACCESS_KEY_ID>
aws_secret_access_key=<AWS_SECRET_ACCESS_KEY>
EOF

    You use the credentials-velero file to create a Secret object for AWS before you install the Data Protection Application.

About backup and snapshot locations and their secrets

Review backup location, snapshot location, and secret configuration requirements for the DataProtectionApplication custom resource (CR). This helps you understand storage options and credential management for data protection operations.

Backup locations

You can specify one of the following AWS S3-compatible object storage solutions as a backup location:

  • Multicloud Object Gateway (MCG)

  • Red Hat Container Storage

  • Ceph RADOS Gateway; also known as Ceph Object Gateway

  • Red Hat OpenShift Data Foundation

  • MinIO

Velero backs up OKD resources, Kubernetes objects, and internal images as an archive file on object storage.

Snapshot locations

If you use your cloud provider’s native snapshot API to back up persistent volumes, you must specify the cloud provider as the snapshot location.

If you use Container Storage Interface (CSI) snapshots, you do not need to specify a snapshot location because you will create a VolumeSnapshotClass CR to register the CSI driver.

If you use File System Backup (FSB), you do not need to specify a snapshot location because FSB backs up the file system on object storage.

Secrets

If the backup and snapshot locations use the same credentials or if you do not require a snapshot location, you create a default Secret.

If the backup and snapshot locations use different credentials, you create two secret objects:

  • Custom Secret for the backup location, which you specify in the DataProtectionApplication CR.

  • Default Secret for the snapshot location, which is not referenced in the DataProtectionApplication CR.

The Data Protection Application requires a default Secret. Otherwise, the installation will fail.

If you do not want to specify backup or snapshot locations during the installation, you can create a default Secret with an empty credentials-velero file.

Creating a default Secret

You create a default Secret if your backup and snapshot locations use the same credentials or if you do not require a snapshot location.

The default name of the Secret is cloud-credentials.

The DataProtectionApplication custom resource (CR) requires a default Secret. Otherwise, the installation will fail. If the name of the backup location Secret is not specified, the default name is used.

If you do not want to use the backup location credentials during the installation, you can create a Secret with the default name by using an empty credentials-velero file.
Prerequisites

  • Your object storage and cloud storage, if any, must use the same credentials.

  • You must configure object storage for Velero.

Procedure

  1. Create a credentials-velero file for the backup storage location in the appropriate format for your cloud provider.

    See the following example:

    [default]
aws_access_key_id=<AWS_ACCESS_KEY_ID>
aws_secret_access_key=<AWS_SECRET_ACCESS_KEY>

  2. Create a Secret custom resource (CR) with the default name:

    $ oc create secret generic cloud-credentials -n openshift-adp --from-file cloud=credentials-velero

    The Secret is referenced in the spec.backupLocations.credential block of the DataProtectionApplication CR when you install the Data Protection Application.

Creating profiles for different credentials

If your backup and snapshot locations use different credentials, you create separate profiles in the credentials-velero file.

Then, you create a Secret object and specify the profiles in the DataProtectionApplication custom resource (CR).

Procedure

  1. Create a credentials-velero file with separate profiles for the backup and snapshot locations, as in the following example:

    [backupStorage]
aws_access_key_id=<AWS_ACCESS_KEY_ID>
aws_secret_access_key=<AWS_SECRET_ACCESS_KEY>

[volumeSnapshot]
aws_access_key_id=<AWS_ACCESS_KEY_ID>
aws_secret_access_key=<AWS_SECRET_ACCESS_KEY>

  2. Create a Secret object with the credentials-velero file:

    $ oc create secret generic cloud-credentials -n openshift-adp --from-file cloud=credentials-velero (1)

  3. Add the profiles to the DataProtectionApplication CR, as in the following example:

    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: <dpa_sample>
  namespace: openshift-adp
spec:
...
  backupLocations:
    - name: default
      velero:
        provider: aws
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: <prefix>
        config:
          region: us-east-1
          profile: "backupStorage"
        credential:
          key: cloud
          name: cloud-credentials
  snapshotLocations:
    - velero:
        provider: aws
        config:
          region: us-west-2
          profile: "volumeSnapshot"

Creating an OADP SSE-C encryption key for additional data security

Configure server-side encryption with customer-provided keys (SSE-C) to add an additional layer of encryption for backup data stored in Amazon Web Services (AWS) S3. This protects backup data if AWS credentials become exposed.

Amazon Web Services (AWS) S3 applies server-side encryption with AWS S3 managed keys (SSE-S3) as the base level of encryption for every bucket in Amazon S3.

OpenShift API for Data Protection (OADP) encrypts data by using SSL/TLS, HTTPS, and the velero-repo-credentials secret when transferring the data from a cluster to storage. To protect backup data in case of lost or stolen AWS credentials, apply an additional layer of encryption.

The velero-plugin-for-aws plugin provides several additional encryption methods. You should review its configuration options and consider implementing additional encryption.

You can store your own encryption keys by using server-side encryption with customer-provided keys (SSE-C). This feature provides additional security if your AWS credentials become exposed.

Be sure to store cryptographic keys in a secure and safe manner. Encrypted data and backups cannot be recovered if you do not have the encryption key.
Prerequisites

  • To make OADP mount a secret that contains your SSE-C key to the Velero pod at /credentials, use the following default secret name for AWS: cloud-credentials, and leave at least one of the following labels empty:

The following procedure contains an example of a spec:backupLocations block that does not specify credentials. This example would trigger an OADP secret mounting.

  • If you need the backup location to have credentials with a different name than cloud-credentials, you must add a snapshot location, such as the one in the following example, that does not contain a credential name. Because the following example does not contain a credential name, the snapshot location will use cloud-credentials as its secret for taking snapshots.

     snapshotLocations:
  - velero:
      config:
        profile: default
        region: <region>
      provider: aws
# ...
Procedure

  1. Create an SSE-C encryption key:

    1. Generate a random number and save it as a file named sse.key by running the following command:

      $ dd if=/dev/urandom bs=1 count=32 > sse.key

  2. Create an OKD secret:

    • If you are initially installing and configuring OADP, create the AWS credential and encryption key secret at the same time by running the following command:

      $ oc create secret generic cloud-credentials --namespace openshift-adp --from-file cloud=<path>/openshift_aws_credentials,customer-key=<path>/sse.key

    • If you are updating an existing installation, edit the values of the cloud-credential secret block of the DataProtectionApplication CR manifest, as in the following example:

      apiVersion: v1
data:
  cloud: W2Rfa2V5X2lkPSJBS0lBVkJRWUIyRkQ0TlFHRFFPQiIKYXdzX3NlY3JldF9hY2Nlc3Nfa2V5P<snip>rUE1mNWVSbTN5K2FpeWhUTUQyQk1WZHBOIgo=
  customer-key: v+<snip>TFIiq6aaXPbj8dhos=
kind: Secret
# ...

  3. Edit the value of the customerKeyEncryptionFile attribute in the backupLocations block of the DataProtectionApplication CR manifest, as in the following example:

    spec:
  backupLocations:
    - velero:
        config:
          customerKeyEncryptionFile: /credentials/customer-key
          profile: default
# ...

    You must restart the Velero pod to remount the secret credentials properly on an existing installation.

    The installation is complete, and you can back up and restore OKD resources. The data saved in AWS S3 storage is encrypted with the new key, and you cannot download it from the AWS S3 console or API without the additional encryption key.

Verification

To verify that you cannot download the encrypted files without the inclusion of an additional key, create a test file, upload it, and then try to download it.

  1. Create a test file by running the following command:

    $ echo "encrypt me please" > test.txt

  2. Upload the test file by running the following command:

    $ aws s3api put-object \
  --bucket <bucket> \
  --key test.txt \
  --body test.txt \
  --sse-customer-key fileb://sse.key \
  --sse-customer-algorithm AES256

  3. Try to download the file. In either the Amazon web console or the terminal, run the following command:

    $ s3cmd get s3://<bucket>/test.txt test.txt

    The download fails because the file is encrypted with an additional key.

  4. Download the file with the additional encryption key by running the following command:

    $ aws s3api get-object \
    --bucket <bucket> \
    --key test.txt \
    --sse-customer-key fileb://sse.key \
    --sse-customer-algorithm AES256 \
    downloaded.txt

  5. Read the file contents by running the following command:

    $ cat downloaded.txt
    encrypt me please

Downloading a file with an SSE-C encryption key for files backed up by Velero

When you are verifying an SSE-C encryption key, you can also download the file with the additional encryption key for files that were backed up with Velero.

Procedure

  • Download the file with the additional encryption key for files backed up by Velero by running the following command:

    $ aws s3api get-object \
  --bucket <bucket> \
  --key velero/backups/mysql-persistent-customerkeyencryptionfile4/mysql-persistent-customerkeyencryptionfile4.tar.gz \
  --sse-customer-key fileb://sse.key \
  --sse-customer-algorithm AES256 \
  --debug \
  velero_download.tar.gz

Installing the Data Protection Application

You install the Data Protection Application (DPA) by creating an instance of the DataProtectionApplication API.

Prerequisites

  • You must install the OADP Operator.

  • You must configure object storage as a backup location.

  • If you use snapshots to back up PVs, your cloud provider must support either a native snapshot API or Container Storage Interface (CSI) snapshots.

  • If the backup and snapshot locations use the same credentials, you must create a Secret with the default name, cloud-credentials.

  • If the backup and snapshot locations use different credentials, you must create a Secret with the default name, cloud-credentials, which contains separate profiles for the backup and snapshot location credentials.

    If you do not want to specify backup or snapshot locations during the installation, you can create a default Secret with an empty credentials-velero file. If there is no default Secret, the installation will fail.
Procedure

  1. Click Operators → Installed Operators and select the OADP Operator.

  2. Under Provided APIs, click Create instance in the DataProtectionApplication box.

  3. Click YAML View and update the parameters of the DataProtectionApplication manifest:

    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: <dpa_sample>
  namespace: openshift-adp
spec:
  configuration:
    velero:
      defaultPlugins:
        - openshift
        - aws
      resourceTimeout: 10m
    nodeAgent:
      enable: true
      uploaderType: kopia
      podConfig:
        nodeSelector: <node_selector>
  backupLocations:
    - name: default
      velero:
        provider: aws
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: <prefix>
        config:
          region: <region>
          profile: "default"
          s3ForcePathStyle: "true"
          s3Url: <s3_url>
        credential:
          key: cloud
          name: cloud-credentials
  snapshotLocations:
    - name: default
      velero:
        provider: aws
        config:
          region: <region>
          profile: "default"
        credential:
          key: cloud
          name: cloud-credentials

    where:

    namespace

    Specifies the default namespace for OADP which is openshift-adp. The namespace is a variable and is configurable.

    openshift

    Specifies that the openshift plugin is mandatory.

    resourceTimeout

    Specifies how many minutes to wait for several Velero resources such as Velero CRD availability, volumeSnapshot deletion, and backup repository availability, before timeout occurs. The default is 10m.

    nodeAgent

    Specifies the administrative agent that routes the administrative requests to servers.

    enable

    Set this value to true if you want to enable nodeAgent and perform File System Backup.

    uploaderType

    Specifies the uploader type. Enter kopia or restic as your uploader. You cannot change the selection after the installation. For the Built-in DataMover you must use Kopia. The nodeAgent deploys a daemon set, which means that the nodeAgent pods run on each working node. You can configure File System Backup by adding spec.defaultVolumesToFsBackup: true to the Backup CR.

    nodeSelector

    Specifies the nodes on which Kopia or Restic are available. By default, Kopia or Restic run on all nodes.

    bucket

    Specifies a bucket as the backup storage location. If the bucket is not a dedicated bucket for Velero backups, you must specify a prefix.

    prefix

    Specifies a prefix for Velero backups, for example, velero, if the bucket is used for multiple purposes.

    s3ForcePathStyle

    Specifies whether to force path style URLs for S3 objects (Boolean). Not Required for AWS S3. Required only for S3 compatible storage.

    s3Url

    Specifies the URL of the object store that you are using to store backups. Not required for AWS S3. Required only for S3 compatible storage.

    name

    Specifies the name of the Secret object that you created. If you do not specify this value, the default name, cloud-credentials, is used. If you specify a custom name, the custom name is used for the backup location.

    snapshotLocations

    Specifies a snapshot location, unless you use CSI snapshots or a File System Backup (FSB) to back up PVs.

    region

    Specifies that the snapshot location must be in the same region as the PVs.

    name

    Specifies the name of the Secret object that you created. If you do not specify this value, the default name, cloud-credentials, is used. If you specify a custom name, the custom name is used for the snapshot location. If your backup and snapshot locations use different credentials, create separate profiles in the credentials-velero file.

  4. Click Create.

Verification

  1. Verify the installation by viewing the OpenShift API for Data Protection (OADP) resources by running the following command:

    $ oc get all -n openshift-adp
    NAME                                                     READY   STATUS    RESTARTS   AGE
pod/oadp-operator-controller-manager-67d9494d47-6l8z8    2/2     Running   0          2m8s
pod/node-agent-9cq4q                                     1/1     Running   0          94s
pod/node-agent-m4lts                                     1/1     Running   0          94s
pod/node-agent-pv4kr                                     1/1     Running   0          95s
pod/velero-588db7f655-n842v                              1/1     Running   0          95s

NAME                                                       TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)    AGE
service/oadp-operator-controller-manager-metrics-service   ClusterIP   172.30.70.140    <none>        8443/TCP   2m8s
service/openshift-adp-velero-metrics-svc                   ClusterIP   172.30.10.0      <none>        8085/TCP   8h

NAME                        DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
daemonset.apps/node-agent    3         3         3       3            3           <none>          96s

NAME                                                READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/oadp-operator-controller-manager    1/1     1            1           2m9s
deployment.apps/velero                              1/1     1            1           96s

NAME                                                           DESIRED   CURRENT   READY   AGE
replicaset.apps/oadp-operator-controller-manager-67d9494d47    1         1         1       2m9s
replicaset.apps/velero-588db7f655                              1         1         1       96s

  2. Verify that the DataProtectionApplication (DPA) is reconciled by running the following command:

    $ oc get dpa dpa-sample -n openshift-adp -o jsonpath='{.status}'
    {"conditions":[{"lastTransitionTime":"2023-10-27T01:23:57Z","message":"Reconcile complete","reason":"Complete","status":"True","type":"Reconciled"}]}

  3. Verify the type is set to Reconciled.

  4. Verify the backup storage location and confirm that the PHASE is Available by running the following command:

    $ oc get backupstoragelocations.velero.io -n openshift-adp
    NAME           PHASE       LAST VALIDATED   AGE     DEFAULT
dpa-sample-1   Available   1s               3d16h   true

Setting Velero CPU and memory resource allocations

You set the CPU and memory resource allocations for the Velero pod by editing the DataProtectionApplication custom resource (CR) manifest.

Prerequisites

  • You must have the OpenShift API for Data Protection (OADP) Operator installed.

Procedure

  • Edit the values in the spec.configuration.velero.podConfig.ResourceAllocations block of the DataProtectionApplication CR manifest, as in the following example:

    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: <dpa_sample>
spec:
# ...
  configuration:
    velero:
      podConfig:
        nodeSelector: <node_selector>
        resourceAllocations:
          limits:
            cpu: "1"
            memory: 1024Mi
          requests:
            cpu: 200m
            memory: 256Mi

    where:

    nodeSelector

    Specifies the node selector to be supplied to Velero podSpec.

    resourceAllocations

    Specifies the resource allocations listed for average usage.

    Kopia is an option in OADP 1.3 and later releases. You can use Kopia for file system backups, and Kopia is your only option for Data Mover cases with the built-in Data Mover.

    Kopia is more resource intensive than Restic, and you might need to adjust the CPU and memory requirements accordingly.

Use the nodeSelector field to select which nodes can run the node agent. The nodeSelector field is the simplest recommended form of node selection constraint. Any label specified must match the labels on each node.

Enabling self-signed CA certificates

You must enable a self-signed CA certificate for object storage by editing the DataProtectionApplication custom resource (CR) manifest to prevent a certificate signed by unknown authority error.

Prerequisites

  • You must have the OpenShift API for Data Protection (OADP) Operator installed.

Procedure

  • Edit the spec.backupLocations.velero.objectStorage.caCert parameter and spec.backupLocations.velero.config parameters of the DataProtectionApplication CR manifest:

    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: <dpa_sample>
spec:
# ...
  backupLocations:
    - name: default
      velero:
        provider: aws
        default: true
        objectStorage:
          bucket: <bucket>
          prefix: <prefix>
          caCert: <base64_encoded_cert_string>
        config:
          insecureSkipTLSVerify: "false"
# ...

    where:

    caCert

    Specifies the Base64-encoded CA certificate string.

    insecureSkipTLSVerify

    Specifies the insecureSkipTLSVerify configuration. The configuration can be set to either "true" or "false". If set to "true", SSL/TLS security is disabled. If set to "false", SSL/TLS security is enabled.

Using CA certificates with the velero command aliased for Velero deployment

You might want to use the Velero CLI without installing it locally on your system by creating an alias for it.

Prerequisites

  • You must be logged in to the OKD cluster as a user with the cluster-admin role.

  • You must have the OpenShift CLI (oc) installed. .Procedure

    1. To use an aliased Velero command, run the following command:

      $ alias velero='oc -n openshift-adp exec deployment/velero -c velero -it -- ./velero'

    2. Check that the alias is working by running the following command:

      $ velero version
      Client:
	Version: v1.12.1-OADP
	Git commit: -
Server:
	Version: v1.12.1-OADP

    3. To use a CA certificate with this command, you can add a certificate to the Velero deployment by running the following commands:

      $ CA_CERT=$(oc -n openshift-adp get dataprotectionapplications.oadp.openshift.io <dpa-name> -o jsonpath='{.spec.backupLocations[0].velero.objectStorage.caCert}')
      $ [[ -n $CA_CERT ]] && echo "$CA_CERT" | base64 -d | oc exec -n openshift-adp -i deploy/velero -c velero -- bash -c "cat > /tmp/your-cacert.txt" || echo "DPA BSL has no caCert"
      $ velero describe backup <backup_name> --details --cacert /tmp/<your_cacert>.txt

    4. To fetch the backup logs, run the following command:

      $ velero backup logs  <backup_name>  --cacert /tmp/<your_cacert.txt>

      You can use these logs to view failures and warnings for the resources that you cannot back up.

    5. If the Velero pod restarts, the /tmp/your-cacert.txt file disappears, and you must re-create the /tmp/your-cacert.txt file by re-running the commands from the previous step.

    6. You can check if the /tmp/your-cacert.txt file still exists, in the file location where you stored it, by running the following command:

      $ oc exec -n openshift-adp -i deploy/velero -c velero -- bash -c "ls /tmp/your-cacert.txt"
/tmp/your-cacert.txt

      In a future release of OpenShift API for Data Protection (OADP), we plan to mount the certificate to the Velero pod so that this step is not required.

Configuring node agents and node labels

The Data Protection Application (DPA) uses the nodeSelector field to select which nodes can run the node agent. The nodeSelector field is the recommended form of node selection constraint.

Procedure

  1. Run the node agent on any node that you choose by adding a custom label:

    $ oc label node/<node_name> node-role.kubernetes.io/nodeAgent=""

    Any label specified must match the labels on each node.

  2. Use the same custom label in the DPA.spec.configuration.nodeAgent.podConfig.nodeSelector field, which you used for labeling nodes:

    configuration:
  nodeAgent:
    enable: true
    podConfig:
      nodeSelector:
        node-role.kubernetes.io/nodeAgent: ""

    The following example is an anti-pattern of nodeSelector and does not work unless both labels, node-role.kubernetes.io/infra: "" and node-role.kubernetes.io/worker: "", are on the node:

        configuration:
      nodeAgent:
        enable: true
        podConfig:
          nodeSelector:
            node-role.kubernetes.io/infra: ""
            node-role.kubernetes.io/worker: ""

Configuring the backup storage location with a MD5 checksum algorithm

You can configure the Backup Storage Location (BSL) in the Data Protection Application (DPA) to use a MD5 checksum algorithm for both Amazon Simple Storage Service (Amazon S3) and S3-compatible storage providers. The checksum algorithm calculates the checksum for uploading and downloading objects to Amazon S3. You can use one of the following options to set the checksumAlgorithm field in the spec.backupLocations.velero.config.checksumAlgorithm section of the DPA.

  • CRC32

  • CRC32C

  • SHA1

  • SHA256

You can also set the checksumAlgorithm field to an empty value to skip the MD5 checksum check. If you do not set a value for the checksumAlgorithm field, then the default value is set to CRC32.

Prerequisites

  • You have installed the OADP Operator.

  • You have configured Amazon S3, or S3-compatible object storage as a backup location.

Procedure

  • Configure the BSL in the DPA as shown in the following example:

    Example Data Protection Application
    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: test-dpa
  namespace: openshift-adp
spec:
  backupLocations:
  - name: default
    velero:
      config:
        checksumAlgorithm: ""
        insecureSkipTLSVerify: "true"
        profile: "default"
        region: <bucket_region>
        s3ForcePathStyle: "true"
        s3Url: <bucket_url>
      credential:
        key: cloud
        name: cloud-credentials
      default: true
      objectStorage:
        bucket: <bucket_name>
        prefix: velero
      provider: aws
  configuration:
    velero:
      defaultPlugins:
      - openshift
      - aws
      - csi

    where:

    checksumAlgorithm

    Specifies the checksumAlgorithm. In this example, the checksumAlgorithm field is set to an empty value. You can select an option from the following list: CRC32, CRC32C, SHA1, SHA256.

    If you are using Noobaa as the object storage provider, and you do not set the spec.backupLocations.velero.config.checksumAlgorithm field in the DPA, an empty value of checksumAlgorithm is added to the BSL configuration.

    The empty value is only added for BSLs that are created using the DPA. This value is not added if you create the BSL by using any other method.

Configuring the DPA with client burst and QPS settings

The burst setting determines how many requests can be sent to the velero server before the limit is applied. After the burst limit is reached, the queries per second (QPS) setting determines how many additional requests can be sent per second.

You can set the burst and QPS values of the velero server by configuring the Data Protection Application (DPA) with the burst and QPS values. You can use the dpa.configuration.velero.client-burst and dpa.configuration.velero.client-qps fields of the DPA to set the burst and QPS values.

Prerequisites

  • You have installed the OADP Operator.

Procedure

  • Configure the client-burst and the client-qps fields in the DPA as shown in the following example:

    Example Data Protection Application
    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: test-dpa
  namespace: openshift-adp
spec:
  backupLocations:
    - name: default
      velero:
        config:
          insecureSkipTLSVerify: "true"
          profile: "default"
          region: <bucket_region>
          s3ForcePathStyle: "true"
          s3Url: <bucket_url>
        credential:
          key: cloud
          name: cloud-credentials
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: velero
        provider: aws
  configuration:
    nodeAgent:
      enable: true
      uploaderType: restic
    velero:
      client-burst: 500
      client-qps: 300
      defaultPlugins:
        - openshift
        - aws
        - kubevirt

    where:

    client-burst

    Specifies the client-burst value. In this example, the client-burst field is set to 500.

    client-qps

    Specifies the client-qps value. In this example, the client-qps field is set to 300.

Overriding the imagePullPolicy setting in the DPA

In OADP 1.4.0 or earlier, the Operator sets the imagePullPolicy field of the Velero and node agent pods to Always for all images.

In OADP 1.4.1 or later, the Operator first checks if each image has the sha256 or sha512 digest and sets the imagePullPolicy field accordingly:

  • If the image has the digest, the Operator sets imagePullPolicy to IfNotPresent.

  • If the image does not have the digest, the Operator sets imagePullPolicy to Always.

You can also override the imagePullPolicy field by using the spec.imagePullPolicy field in the Data Protection Application (DPA).

Prerequisites

  • You have installed the OADP Operator.

Procedure

  • Configure the spec.imagePullPolicy field in the DPA as shown in the following example:

    Example Data Protection Application
    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: test-dpa
  namespace: openshift-adp
spec:
  backupLocations:
    - name: default
      velero:
        config:
          insecureSkipTLSVerify: "true"
          profile: "default"
          region: <bucket_region>
          s3ForcePathStyle: "true"
          s3Url: <bucket_url>
        credential:
          key: cloud
          name: cloud-credentials
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: velero
        provider: aws
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
    velero:
      defaultPlugins:
        - openshift
        - aws
        - kubevirt
        - csi
  imagePullPolicy: Never

    where:

    imagePullPolicy

    Specifies the value for imagePullPolicy. In this example, the imagePullPolicy field is set to Never.

Enabling CSI in the DataProtectionApplication CR

You enable the Container Storage Interface (CSI) in the DataProtectionApplication custom resource (CR) in order to back up persistent volumes with CSI snapshots.

Prerequisites

  • The cloud provider must support CSI snapshots.

Procedure

  • Edit the DataProtectionApplication CR, as in the following example:

    apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
...
spec:
  configuration:
    velero:
      defaultPlugins:
      - openshift
      - csi

    where:

    csi

    Specifies the csi default plugin.

Disabling the node agent in DataProtectionApplication

If you are not using Restic, Kopia, or DataMover for your backups, you can disable the nodeAgent field in the DataProtectionApplication custom resource (CR). Before you disable nodeAgent, ensure the OADP Operator is idle and not running any backups.

Procedure

  1. To disable the nodeAgent, set the enable flag to false. See the following example:

    Example DataProtectionApplication CR
    # ...
configuration:
  nodeAgent:
    enable: false
    uploaderType: kopia
# ...

    where:

    enable

    Enables the node agent.

  2. To enable the nodeAgent, set the enable flag to true. See the following example:

    Example DataProtectionApplication CR
    # ...
configuration:
  nodeAgent:
    enable: true
    uploaderType: kopia
# ...

    where:

    enable

    Enables the node agent.

    You can set up a job to enable and disable the nodeAgent field in the DataProtectionApplication CR. For more information, see "Running tasks in pods using jobs".

Additional resources