This is a cache of https://docs.okd.io/4.14/scalability_and_performance/telco_ref_design_specs/core/telco-core-ref-design-components.html. It is a snapshot of the page at 2024-11-26T23:04:34.059+0000.
Core reference design components - Reference design specifications | Scalability and performance | OKD 4.14
  1. Documentation
×

Telco core reference design components

CPU partitioning and performance tuning

New in this release

Open vSwitch (OVS) is removed from CPU partitioning. OVS manages its cpuset dynamically to automatically adapt to network traffic needs. Users no longer need to reserve additional CPUs for handling high network throughput on the primary container network interface (CNI). There is no impact on the configuration needed to benefit from this change.

Description

CPU partitioning allows for the separation of sensitive workloads from generic purposes, auxiliary processes, interrupts, and driver work queues to achieve improved performance and latency. The CPUs allocated to those auxiliary processes are referred to as reserved in the following sections. In hyperthreaded systems, a CPU is one hyperthread.

For more information, see Restricting CPUs for infra and application containers.

Configure system level performance. For recommended settings, see Configuring host firmware for low latency and high performance.

Limits and requirements

  • The operating system needs a certain amount of CPU to perform all the support tasks including kernel networking.

    • A system with just user plane networking applications (DPDK) needs at least one Core (2 hyperthreads when enabled) reserved for the operating system and the infrastructure components.

  • A system with Hyper-Threading enabled must always put all core sibling threads to the same pool of CPUs.

  • The set of reserved and isolated cores must include all CPU cores.

  • Core 0 of each NUMA node must be included in the reserved CPU set.

  • Isolated cores might be impacted by interrupts. The following annotations must be attached to the pod if guaranteed QoS pods require full use of the CPU:

    cpu-load-balancing.crio.io: "disable"
cpu-quota.crio.io: "disable"
irq-load-balancing.crio.io: "disable"

  • When per-pod power management is enabled with PerformanceProfile.workloadHints.perPodPowerManagement the following annotations must also be attached to the pod if guaranteed QoS pods require full use of the CPU:

    cpu-c-states.crio.io: "disable"
cpu-freq-governor.crio.io: "performance"
Engineering considerations

  • The minimum reserved capacity (systemReserved) required can be found by following the guidance in "Which amount of CPU and memory are recommended to reserve for the system in OCP 4 nodes?"

  • The actual required reserved CPU capacity depends on the cluster configuration and workload attributes.

  • This reserved CPU value must be rounded up to a full core (2 hyper-thread) alignment.

  • Changes to the CPU partitioning will drain and reboot the nodes in the MCP.

  • The reserved CPUs reduce the pod density, as the reserved CPUs are removed from the allocatable capacity of the OpenShift node.

  • The real-time workload hint should be enabled if the workload is real-time capable.

  • Hardware without Interrupt Request (IRQ) affinity support will impact isolated CPUs. To ensure that pods with guaranteed CPU QoS have full use of allocated CPU, all hardware in the server must support IRQ affinity.

Additional resources

Service Mesh

Description

Telco core CNFs typically require a service mesh implementation. The specific features and performance required are dependent on the application. The selection of service mesh implementation and configuration is outside the scope of this documentation. The impact of service mesh on cluster resource utilization and performance, including additional latency introduced into pod networking, must be accounted for in the overall solution engineering.

Additional resources

Networking

OKD networking is an ecosystem of features, plugins, and advanced networking capabilities that extend Kubernetes networking with the advanced networking-related features that your cluster needs to manage its network traffic for one or multiple hybrid clusters.

Additional resources

Cluster Network Operator (CNO)

New in this release

Not applicable.

Description

The CNO deploys and manages the cluster network components including the default OVN-Kubernetes network plugin during OKD cluster installation. It allows configuring primary interface MTU settings, OVN gateway modes to use node routing tables for pod egress, and additional secondary networks such as MACVLAN.

In support of network traffic segregation, multiple network interfaces are configured through the CNO. Traffic steering to these interfaces is configured through static routes applied by using the NMState Operator. To ensure that pod traffic is properly routed, OVN-K is configured with the routingViaHost option enabled. This setting uses the kernel routing table and the applied static routes rather than OVN for pod egress traffic.

The Whereabouts CNI plugin is used to provide dynamic IPv4 and IPv6 addressing for additional pod network interfaces without the use of a DHCP server.

Limits and requirements

  • OVN-Kubernetes is required for IPv6 support.

  • Large MTU cluster support requires connected network equipment to be set to the same or larger value.

Engineering considerations

  • Pod egress traffic is handled by kernel routing table with the routingViaHost option. Appropriate static routes must be configured in the host.

Additional resources

Load Balancer

New in this release

Not applicable.

Description

MetalLB is a load-balancer implementation for bare metal Kubernetes clusters using standard routing protocols. It enables a Kubernetes service to get an external IP address which is also added to the host network for the cluster.

Some use cases might require features not available in MetalLB, for example stateful load balancing. Where necessary, you can use an external third party load balancer. Selection and configuration of an external load balancer is outside the scope of this specification. When an external third party load balancer is used, the integration effort must include enough analysis to ensure all performance and resource utilization requirements are met.

Limits and requirements

  • Stateful load balancing is not supported by MetalLB. An alternate load balancer implementation must be used if this is a requirement for workload CNFs.

  • The networking infrastructure must ensure that the external IP address is routable from clients to the host network for the cluster.

Engineering considerations

  • MetalLB is used in BGP mode only for core use case models.

  • For core use models, MetalLB is supported with only the OVN-Kubernetes network provider used in local gateway mode. See routingViaHost in the "Cluster Network Operator" section.

  • BGP configuration in MetalLB varies depending on the requirements of the network and peers.

  • Address pools can be configured as needed, allowing variation in addresses, aggregation length, auto assignment, and other relevant parameters.

  • The values of parameters in the Bi-Directional Forwarding Detection (BFD) profile should remain close to the defaults. Shorter values might lead to false negatives and impact performance.

Additional resources

SR-IOV

New in this release

Not applicable

Description

SR-IOV enables physical network interfaces (PFs) to be divided into multiple virtual functions (VFs). VFs can then be assigned to multiple pods to achieve higher throughput performance while keeping the pods isolated. The SR-IOV Network Operator provisions and manages SR-IOV CNI, network device plugin, and other components of the SR-IOV stack.

Limits and requirements

  • The network interface controllers supported are listed in OCP supported SR-IOV devices

  • SR-IOV and IOMMU enablement in BIOS: The SR-IOV Network Operator automatically enables IOMMU on the kernel command line.

  • SR-IOV VFs do not receive link state updates from PF. If link down detection is needed, it must be done at the protocol level.

Engineering considerations

  • SR-IOV interfaces in vfio mode are typically used to enable additional secondary networks for applications that require high throughput or low latency.

Additional resources

NMState Operator

New in this release

Not applicable

Description

The NMState Operator provides a Kubernetes API for performing network configurations across the cluster’s nodes. It enables network interface configurations, static IPs and DNS, VLANs, trunks, bonding, static routes, MTU, and enabling promiscuous mode on the secondary interfaces. The cluster nodes periodically report on the state of each node’s network interfaces to the API server.

Limits and requirements

Not applicable

Engineering considerations

  • The initial networking configuration is applied using NMStateConfig content in the installation CRs. The NMState Operator is used only when needed for network updates.

  • When SR-IOV virtual functions are used for host networking, the NMState Operator using NodeNetworkConfigurationPolicy is used to configure those VF interfaces, for example, VLANs and the MTU.

Additional resources

Logging

New in this release

Not applicable

Description

The ClusterLogging Operator enables collection and shipping of logs off the node for remote archival and analysis. The reference configuration ships audit and infrastructure logs to a remote archive by using Kafka.

Limits and requirements

Not applicable

Engineering considerations

  • The impact of cluster CPU use is based on the number or size of logs generated and the amount of log filtering configured.

  • The reference configuration does not include shipping of application logs. Inclusion of application logs in the configuration requires evaluation of the application logging rate and sufficient additional CPU resources allocated to the reserved set.

Additional resources

Power Management

New in this release

  • You can specify a maximum latency that is C-state for a low latency pod when using per-pod power management. Previously, C-states could only be disabled completely on a per pod basis.

Description

The Performance Profile can be used to configure a cluster in a high power, low power or mixed (per-pod power management) mode. The choice of power mode depends on the characteristics of the workloads running on the cluster particularly how sensitive they are to latency.

Limits and requirements

  • Power configuration relies on appropriate BIOS configuration, for example, enabling C-states and P-states. Configuration varies between hardware vendors.

Engineering considerations

  • Latency: To ensure that latency-sensitive workloads meet their requirements, you will need either a high-power configuration or a per-pod power management configuration. Per-pod power management is only available for Guaranteed QoS Pods with dedicated pinned CPUs.

Additional resources

Storage

Overview

Cloud native storage services can be provided by multiple solutions including OpenShift Data Foundation from Red Hat or third parties.

OpenShift Data Foundation is a Ceph based software-defined storage solution for containers. It provides block storage, file system storage, and on-premises object storage, which can be dynamically provisioned for both persistent and non-persistent data requirements. Telco core applications require persistent storage.

All storage data may not be encrypted in flight. To reduce risk, isolate the storage network from other cluster networks. The storage network must not be reachable, or routable, from other cluster networks. Only nodes directly attached to the storage network should be allowed to gain access to it.

OpenShift Data Foundation

New in this release

Not applicable

Description

Red Hat OpenShift Data Foundation is a software-defined storage service for containers. For Telco core clusters, storage support is provided by OpenShift Data Foundation storage services running externally to the application workload cluster. OpenShift Data Foundation supports separation of storage traffic using secondary CNI networks.

Limits and requirements
Engineering considerations

  • OpenShift Data Foundation network traffic should be isolated from other traffic on a dedicated network, for example, by using VLAN isolation.

Other Storage

Other storage solutions can be used to provide persistent storage for core clusters. The configuration and integration of these solutions is outside the scope of the telco core RDS. Integration of the storage solution into the core cluster must include correct sizing and performance analysis to ensure the storage meets overall performance and resource utilization requirements.

Additional resources

Monitoring

New in this release

Not applicable

Description

The Cluster Monitoring Operator (CMO) is included by default on all OpenShift clusters and provides monitoring (metrics, dashboards, and alerting) for the platform components and optionally user projects as well.

Configuration of the monitoring operator allows for customization, including:

  • Default retention period

  • Custom alert rules

The default handling of pod CPU and memory metrics is based on upstream Kubernetes cAdvisor and makes a tradeoff that prefers handling of stale data over metric accuracy. This leads to spiky data that will create false triggers of alerts over user-specified thresholds. OpenShift supports an opt-in dedicated service monitor feature creating an additional set of pod CPU and memory metrics that do not suffer from the spiky behavior. For additional information, see this solution guide.

In addition to default configuration, the following metrics are expected to be configured for telco core clusters:

  • Pod CPU and memory metrics and alerts for user workloads

Limits and requirements

  • Monitoring configuration must enable the dedicated service monitor feature for accurate representation of pod metrics

Engineering considerations

  • The Prometheus retention period is specified by the user. The value used is a tradeoff between operational requirements for maintaining historical data on the cluster against CPU and storage resources. Longer retention periods increase the need for storage and require additional CPU to manage the indexing of data.

Additional resources

Scheduling

New in this release

  • NUMA-aware scheduling with the NUMA Resources Operator is now generally available in OKD 4.14.

  • With this release, you can exclude advertising the Non-Uniform Memory Access (NUMA) node for the SR-IOV network to the Topology Manager. By not advertising the NUMA node for the SR-IOV network, you can permit more flexible SR-IOV network deployments during NUMA-aware pod scheduling. To exclude advertising the NUMA node for the SR-IOV network resource to the Topology Manager, set the value excludeTopology to true in the SriovNetworkNodePolicy CR. For more information, see Exclude the SR-IOV network topology for NUMA-aware scheduling.

Description

  • The scheduler is a cluster-wide component responsible for selecting the right node for a given workload. It is a core part of the platform and does not require any specific configuration in the common deployment scenarios. However, there are few specific use cases described in the following section.

Limits and requirements

  • The default scheduler does not understand the NUMA locality of workloads. It only knows about the sum of all free resources on a worker node. This might cause workloads to be rejected when scheduled to a node with Topology manager policy set to single-numa-node or restricted.

    • For example, consider a pod requesting 6 CPUs and being scheduled to an empty node that has 4 CPUs per NUMA node. The total allocatable capacity of the node is 8 CPUs and the scheduler will place the pod there. The node local admission will fail, however, as there are only 4 CPUs available in each of the NUMA nodes.

    • All clusters with multi-NUMA nodes are required to use the NUMA Resources Operator. The machineConfigPoolSelector of the NUMA Resources Operator must select all nodes where NUMA aligned scheduling is needed.

  • All machine config pools must have consistent hardware configuration for example all nodes are expected to have the same NUMA zone count.

Engineering considerations

  • Pods might require annotations for correct scheduling and isolation. For more information on annotations, see the "CPU Partitioning and performance tuning" section.

Additional resources

Installation

New in this release
Description

Telco core clusters can be installed using the Agent Based Installer (ABI). This method allows users to install OKD on bare metal servers without requiring additional servers or VMs for managing the installation. The ABI installer can be run on any system for example a laptop to generate an ISO installation image. This ISO is used as the installation media for the cluster supervisor nodes. Progress can be monitored using the ABI tool from any system with network connectivity to the supervisor node’s API interfaces.

  • Installation from declarative CRs

  • Does not require additional servers to support installation

  • Supports install in disconnected environment

Limits and requirements

  • Disconnected installation requires a reachable registry with all required content mirrored.

Engineering considerations

  • Networking configuration should be applied as NMState configuration during installation in preference to day-2 configuration by using the NMState Operator.

Additional resources

Installing an OKD cluster with the Agent-based Installer

Security

New in this release

  • DPDK applications that need to inject traffic to the kernel can run in non-privileged pods with the help of the TAP CNI plugin. Furthermore, in this 4.14 release that ability to create a MAC-VLAN, IP-VLAN, and VLAN subinterface based on a master interface in a container namespace is generally available.

Description

Telco operators are security conscious and require clusters to be hardened against multiple attack vectors. Within OKD, there is no single component or feature responsible for securing a cluster. This section provides details of security-oriented features and configuration for the use models covered in this specification.

  • SecurityContextConstraints: All workload pods should be run with restricted-v2 or restricted SCC.

  • Seccomp: All pods should be run with the RuntimeDefault (or stronger) seccomp profile.

  • Rootless DPDK pods: Many user-plane networking (DPDK) CNFs require pods to run with root privileges. With this feature, a conformant DPDK pod can be run without requiring root privileges.

  • Storage: The storage network should be isolated and non-routable to other cluster networks. See the "Storage" section for additional details.

Limits and requirements

  • Rootless DPDK pods requires the following additional configuration steps:

    • Configure the TAP plugin with the container_t SELinux context.

    • Enable the container_use_devices SELinux boolean on the hosts.

Engineering considerations

  • For rootless DPDK pod support, the SELinux boolean container_use_devices must be enabled on the host for the TAP device to be created. This introduces a security risk that is acceptable for short to mid-term use. Other solutions will be explored.

Additional resources

Scalability

New in this release

Not applicable

Description

Clusters will scale to the sizing listed in the limits and requirements section.

Scaling of workloads is described in the use model section.

Limits and requirements

  • Cluster scales to at least 120 nodes

Engineering considerations

Not applicable

Additional configuration

Disconnected environment

Description

Telco core clusters are expected to be installed in networks without direct access to the internet. All container images needed to install, configure, and operator the cluster must be available in a disconnected registry. This includes OKD images, day-2 Operator Lifecycle Manager (OLM) Operator images, and application workload images. The use of a disconnected environment provides multiple benefits, for example:

  • Limiting access to the cluster for security

  • Curated content: The registry is populated based on curated and approved updates for the clusters

Limits and requirements

  • A unique name is required for all custom CatalogSources. Do not reuse the default catalog names.

  • A valid time source must be configured as part of cluster installation.

Engineering considerations

Not applicable

Kernel

New in this release

Not applicable

Description

The user can install the following kernel modules by using MachineConfig to provide extended kernel functionality to CNFs:

  • sctp

  • ip_gre

  • ip6_tables

  • ip6t_REJECT

  • ip6table_filter

  • ip6table_mangle

  • iptable_filter

  • iptable_mangle

  • iptable_nat

  • xt_multiport

  • xt_owner

  • xt_REDIRECT

  • xt_statistic

  • xt_TCPMSS

Limits and requirements

  • Use of functionality available through these kernel modules must be analyzed by the user to determine the impact on CPU load, system performance, and ability to sustain KPI.

Out of tree drivers are not supported.
Engineering considerations

Not applicable