This is a cache of https://docs.openshift.com/enterprise/3.0/install_config/install/advanced_install.html. It is a snapshot of the page at 2024-11-27T04:39:33.249+0000.
Advanced Installation - Installing | Installation and Configuration | OpenShift Enterprise 3.0
    OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history
×

Advanced Installation

Overview

For production environments, a reference configuration implemented using Ansible playbooks is available as the advanced installation method for installing OpenShift hosts. Familiarity with Ansible is assumed, however you can use this configuration as a reference to create your own implementation using the configuration management tool of your choosing.

Alternatively, you can use the quick installation method for trial installations.

Running Ansible playbooks with the --tags or --check options is not supported by Red Hat.

Before You Begin

Before installing OpenShift, you must first see the Prerequisites topic to prepare your hosts, which includes verifying system and environment requirements per component type and properly installing and configuring Docker. It also includes installing Ansible version 1.8.4 or later, as the advanced installation method is based on Ansible playbooks and as such requires directly invoking Ansible.

After following the instructions in the Prerequisites topic, you can continue to Configuring Ansible.

Configuring Ansible

The /etc/ansible/hosts file is Ansible’s inventory file for the playbook to use during the installation. The inventory file describes the configuration for your OpenShift cluster. You must replace the default contents of the file with your desired configuration.

The following sections describe commonly-used variables to set in your inventory file during an advanced installation, followed by example inventory files you can use as a starting point for your installation. The examples describe various environment topographies. You can choose an example that matches your requirements, modify it to match your own environment, and use it as your inventory file when running the Ansible installer.

Before running the Ansible installer, any hosts you intend to designate as masters during the installation process should also be configured as unschedulable nodes, in order to configure the masters as part of the OpenShift SDN.

Configuring Host Variables

To assign environment variables to hosts during the Ansible install, indicate the desired variables in the /etc/ansible/hosts file after the host entry in the [masters] or [nodes] sections. For example:

[masters]
ec2-52-6-179-239.compute-1.amazonaws.com openshift_public_hostname=ose3-master.public.example.com

The following table describes variables for use with the Ansible installer that can be assigned to individual host entries:

Table 1. Host Variables
Variable Purpose

openshift_hostname

This variable overrides the internal cluster host name for the system. Use this when the system’s default IP address does not resolve to the system host name.

openshift_public_hostname

This variable overrides the system’s public host name. Use this for cloud installations, or for hosts on networks using a network address translation (NAT).

openshift_ip

This variable overrides the cluster internal IP address for the system. Use this when using an interface that is not configured with the default route.

openshift_public_ip

This variable overrides the system’s public IP address. Use this for cloud installations, or for hosts on networks using a network address translation (NAT).

Configuring Cluster Variables

To assign environment variables during the Ansible install that apply more globally to your OpenShift cluster overall, indicate the desired variables in the /etc/ansible/hosts file on separate, single lines within the [OSEv3:vars] section. For example:

[OSEv3:vars]

openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/openshift/openshift-passwd'}]

osm_default_subdomain=apps.test.example.com

The following table describes variables for use with the Ansible installer that can be assigned cluster-wide:

Table 2. Cluster Variables
Variable Purpose

ansible_ssh_user

This variable sets the SSH user for the installer to use and defaults to root. This user should allow SSH-based authentication without requiring a password. If using SSH key-based authentication, then the key should be managed by an SSH agent.

ansible_sudo

If ansible_ssh_user is not root, this variable must be set to true and the user must be configured for passwordless sudo.

openshift_master_cluster_hostname

This variable overrides the host name for the cluster, which defaults to the host name of the master.

openshift_master_cluster_public_hostname

This variable overrides the public host name for the cluster, which defaults to the host name of the master. If you use an external load balancer, specify the address of the external load balancer.

For example:

---- openshift_master_cluster_public_hostname=openshift-ansible.public.example.com ----

openshift_master_identity_providers

This variable overrides the identity provider, which defaults to Deny All.

osm_default_subdomain

This variable overrides the default subdomain to use for exposed routes.

osm_default_node_selector

This variable overrides the node selector that projects will use by default when placing pods.

osm_cluster_network_cidr

This variable overrides the SDN cluster network CIDR block. This is the network from which pod IPs are assigned. This network block should be a private block and should not conflict with existing network blocks in your infrastructure that pods may require access to. Defaults to 10.1.0.0/16 and can not be re-configured after deployment.

osm_host_subnet_length

This variable specifies the size of the per host subnet allocated for pod IPs by OpenShift SDN. Defaults to /8 which means that from the 10.1.0.0/16 cluster network a subnet of size /24 is allocated to each host (i.e., 10.1.0.0/24, 10.1.1.0/24, 10.1.2.0/24, and so on). This can not be re-configured after deployment.

Configuring Node Host Labels

You can assign labels to node hosts during the Ansible install by configuring the /etc/ansible/hosts file. Labels are useful for determining the placement of pods onto nodes using the scheduler.

To assign labels to a node host during an Ansible install, use the openshift_node_labels variable with the desired labels added to the desired node host entry in the [nodes] section. For example:

[nodes]
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"

Single Master and Multiple Nodes

The following table describes an example environment for a single master and two nodes:

Host Name Infrastructure Component to Install

master.example.com

Master and node

node1.example.com

Node

node2.example.com

You can see these example hosts present in the [masters] and [nodes] sections of the following example inventory file:

Example 1. Single Master and Multiple Nodes Inventory File
# Create an OSEv3 group that contains the masters and nodes groups
[OSEv3:children]
masters
nodes

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
# SSH user, this user should allow ssh based auth without requiring a password
ansible_ssh_user=root

# If ansible_ssh_user is not root, ansible_sudo must be set to true
#ansible_sudo=true

product_type=openshift
deployment_type=enterprise

# uncomment the following to enable htpasswd authentication; defaults to DenyAllPasswordIdentityProvider
#openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/openshift/openshift-passwd'}]

# host group for masters
[masters]
master.example.com

# host group for nodes, includes region info
[nodes]
master.example.com openshift_node_labels="{'region': 'infra', 'zone': 'default'}"
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"
node2.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

To use this example, modify the file to match your environment and specifications, and save it as /etc/ansible/hosts.

Moving from a single master cluster to multiple masters after installation is not supported.

Single Master, Multiple etcd, and Multiple Nodes

The following table describes an example environment for a single master, three etcd hosts, and two nodes:

Host Name Infrastructure Component to Install

master.example.com

Master and node

etcd1.example.com

etcd

etcd2.example.com

etcd3.example.com

node1.example.com

Node

node2.example.com

When specifying multiple etcd hosts, external etcd is installed and configured. Clustering of OpenShift’s embedded etcd is not supported. Also, moving from a single master cluster to multiple masters after installation is not supported.

You can see these example hosts present in the [masters], [nodes], and [etcd] sections of the following example inventory file:

Example 2. Single Master, Multiple etcd, and Multiple Nodes Inventory File
# Create an OSEv3 group that contains the masters and nodes groups
[OSEv3:children]
masters
nodes
etcd

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
ansible_ssh_user=root
product_type=openshift
deployment_type=enterprise

# uncomment the following to enable htpasswd authentication; defaults to DenyAllPasswordIdentityProvider
#openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/openshift/openshift-passwd'}]

# host group for masters
[masters]
master.example.com

# host group for etcd
[etcd]
etcd1.example.com
etcd2.example.com
etcd3.example.com

# host group for nodes, includes region info
[nodes]
master.example.com openshift_node_labels="{'region': 'infra', 'zone': 'default'}"
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"
node2.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

To use this example, modify the file to match your environment and specifications, and save it as /etc/ansible/hosts.

Multiple Masters, Multiple etcd, and Multiple Nodes

The following describes an example environment for three masters, three etcd hosts, and two nodes:

Host Name Infrastructure Component to Install

master1.example.com

Master (clustered using Pacemaker) and node

master2.example.com

master3.example.com

etcd1.example.com

etcd

etcd2.example.com

etcd3.example.com

node1.example.com

Node

node2.example.com

When specifying multiple etcd hosts, external etcd is installed and configured. Clustering of OpenShift’s embedded etcd is not supported.

You can see these example hosts present in the [masters], [nodes], and [etcd] sections of the following example inventory file:

Example 3. Multiple Masters, Multiple etcd, and Multiple Nodes Inventory File
# Create an OSEv3 group that contains the masters and nodes groups
[OSEv3:children]
masters
nodes
etcd

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
ansible_ssh_user=root
product_type=openshift
deployment_type=enterprise

# uncomment the following to enable htpasswd authentication; defaults to DenyAllPasswordIdentityProvider
# openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/openshift/openshift-passwd'}]

# master cluster ha variables using pacemaker or RHEL HA
openshift_master_cluster_method=pacemaker
openshift_master_cluster_password=openshift_cluster
openshift_master_cluster_vip=192.168.133.25
openshift_master_cluster_public_vip=192.168.133.25
openshift_master_cluster_hostname=openshift-master.example.com
openshift_master_cluster_public_hostname=openshift-master.example.com


# host group for masters
[masters]
master1.example.com
master2.example.com
master3.example.com

# host group for etcd
[etcd]
etcd1.example.com
etcd2.example.com
etcd3.example.com

# host group for nodes, includes region info
[nodes]
master[1:3].example.com openshift_node_labels="{'region': 'infra', 'zone': 'default'}"
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"
node2.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

To use this example, modify the file to match your environment and specifications, and save it as /etc/ansible/hosts.

Note the following when using this configuration:

  • Installing multiple masters requires that you configure a fencing device after running the installer.

  • When specifying multiple masters, the installer handles creating and starting the high availability (HA) cluster. If during that process the pcs status command indicates that an HA cluster already exists, the installer skips HA cluster configuration.

Moving from a single master cluster to multiple masters after installation is not supported.

Running the Ansible Installer

After you’ve configured Ansible by defining an inventory file in /etc/ansible/hosts, you can run the Ansible installer:

# ansible-playbook /usr/share/ansible/openshift-ansible/playbooks/byo/config.yml

If for any reason the installation fails, before re-running the installer, see Known Issues to check for any specific instructions or workarounds.

Configuring Fencing

If you installed OpenShift using a configuration for multiple masters, you must configure a fencing device. See Fencing: Configuring STONITH in the High Availability Add-on for Red Hat Enterprise Linux documentation for instructions, then continue to Verifying the Installation.

Verifying the Installation

After the installer completes, you can verify that the master is started and nodes are registered and reporting in Ready status by running the following as root:

# oc get nodes

NAME                      LABELS                                                                     STATUS
master.example.com        kubernetes.io/hostname=master.example.com,region=infra,zone=default        Ready,SchedulingDisabled
node1.example.com         kubernetes.io/hostname=node1.example.com,region=primary,zone=east          Ready
node2.example.com         kubernetes.io/hostname=node2.example.com,region=primary,zone=west          Ready

Multiple etcd Hosts

If you installed multiple etcd hosts:

  1. On a etcd host, verify the etcd cluster health, substituting for the FQDNs of your etcd hosts in the following:

    # etcdctl -C \
    https://etcd1.example.com:2379,https://etcd2.example.com:2379,https://etcd3.example.com:2379 \
    --ca-file=/etc/openshift/master/master.etcd-ca.crt \
    --cert-file=/etc/openshift/master/master.etcd-client.crt \
    --key-file=/etc/openshift/master/master.etcd-client.key cluster-health

  2. Also verify the member list is correct:

    # etcdctl -C \
    https://etcd1.example.com:2379,https://etcd2.example.com:2379,https://etcd3.example.com:2379 \
    --ca-file=/etc/openshift/master/master.etcd-ca.crt \
    --cert-file=/etc/openshift/master/master.etcd-client.crt \
    --key-file=/etc/openshift/master/master.etcd-client.key member list

Multiple Masters

If you installed multiple masters:

  1. On a master host, determine which host is currently running as the active master:

    # pcs status

  2. After determining the active master, put the specified host into standby mode:

    # pcs cluster standby <host1_name>

  3. Verify the master is now running on another host:

    # pcs status

  4. After verifying the master is running on another node, re-enable the host on standby for normal operation by running:

    # pcs cluster unstandby <host1_name>

Red Hat recommends that you also verify your installation by consulting the High Availability Add-on for Red Hat Enterprise Linux documentation.

Adding Nodes to an Existing Cluster

After your cluster is installed, you can install additional nodes (including masters) and add them to your cluster by running the scaleup.yml playbook. This playbook queries the master, generates and distributes new certificates for the new nodes, then runs the configuration playbooks on the new nodes only.

This process is similar to re-running the installer in the quick installation method to add nodes, however you have more configuration options available when using the advanced method and running the playbooks directly.

You must have an existing inventory file (for example, /etc/ansible/hosts) that is representative of your current cluster configuration in order to run the scaleup.yml playbook. If you previously used the atomic-openshift-installer command to run your installation, you can check ~/.config/openshift/.ansible/hosts for the last inventory file that the installer generated and use or modify that as needed as your inventory file. You must then specify the file location with -i when calling ansible-playbook later.

The recommended maximum number of nodes is 300.

To add nodes to an existing cluster:

  1. Ensure you have the latest playbooks by updating the atomic-openshift-utils package:

    # yum update atomic-openshift-utils

  2. Edit your /etc/ansible/hosts file and add new_nodes to the [OSEv3:children] section:

    [OSEv3:children]
masters
nodes
new_nodes

  3. Then, create a [new_nodes] section much like the existing [nodes] section, specifying host information for any new nodes you want to add. For example:

    [nodes]
master[1:3].example.com openshift_node_labels="{'region': 'infra', 'zone': 'default'}"
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"
node2.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

[new_nodes]
node3.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

    See Configuring Host Variables for more options.

  4. Now run the scaleup.yml playbook. If your inventory file is located somewhere other than the default /etc/ansible/hosts, specify the location with the -i option:

    For additional nodes:

    # ansible-playbook [-i /path/to/file] \
    /usr/share/ansible/openshift-ansible/playbooks/byo/openshift-cluster/scaleup.yml

    For additional masters:

    # ansible-playbook [-i /path/to/file] \
    usr/share/ansible/openshift-ansible/playbooks/byo/openshift-master/scaleup.yml

  5. After the playbook completes successfully, verify the installation.

  6. Finally, move any hosts you had defined in the [new_nodes] section up into the [nodes] section (but leave the [new_nodes] section definition itself in place) so that subsequent runs using this inventory file are aware of the nodes but do not handle them as new nodes. For example:

    [nodes]
master[1:3].example.com openshift_node_labels="{'region': 'infra', 'zone': 'default'}"
node1.example.com openshift_node_labels="{'region': 'primary', 'zone': 'east'}"
node2.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"
node3.example.com openshift_node_labels="{'region': 'primary', 'zone': 'west'}"

[new_nodes]

Known Issues

The following are known issues for specified installation configurations.

Multiple Masters

  • On failover, it is possible for the controller manager to overcorrect, which causes the system to run more pods than what was intended. However, this is a transient event and the system does correct itself over time. See https://github.com/GoogleCloudPlatform/kubernetes/issues/10030 for details.

  • On failure of the Ansible installer, you must start from a clean operating system installation. If you are using virtual machines, start from a fresh image. If you are use bare metal machines:

    1. Run the following on a master host:

      # pcs cluster destroy --all

    2. Then, run the following on all node hosts:

      # yum -y remove openshift openshift-* etcd docker

# rm -rf /etc/openshift /var/lib/openshift /etc/etcd \
    /var/lib/etcd /etc/sysconfig/openshift* /etc/sysconfig/docker* \
    /root/.kube/config /etc/ansible/facts.d /usr/share/openshift

What’s Next?

Now that you have a working OpenShift instance, you can: