Mirroring images for a disconnected installation using the oc-mirror plugin - Disconnected installation mirroring | Installing

About the oc-mirror plugin
About the mirror registry
Prerequisites
Preparing your mirror hosts
- Installing the oc-mirror OpenShift CLI plugin
- Configuring credentials that allow images to be mirrored
Creating the image set configuration
Mirroring an image set to a mirror registry
- Mirroring an image set in a partially disconnected environment
- Mirroring an image set in a fully disconnected environment
Configuring your cluster to use the resources generated by oc-mirror
Updating your mirror registry
Image set configuration parameters
Image set configuration examples
Command reference for oc-mirror

You can ensure your clusters only use container images that satisfy your organizational controls on external content. Before you install a cluster on infrastructure that you provision in a restricted network, you must mirror the required container images into that environment. To mirror container images, you must have a registry for mirroring.

You can use the oc-mirror OpenShift CLI (oc) plugin to mirror images to a mirror registry in your fully or partially disconnected environments.

Mirroring images for disconnected environments using the oc-mirror plugin is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

The following steps outline the high-level workflow on how to use the oc-mirror plugin to mirror images to a mirror registry:

Create an image set configuration file.
Mirror the image set to the mirror registry.
Configure your cluster to use the resources generated by the oc-mirror plugin.
Repeat these steps to update your mirror registry as necessary.

About the oc-mirror plugin

You can use the oc-mirror OpenShift CLI (oc) plugin to mirror all required OpenShift Container Platform content and other images to your mirror registry by using a single tool. It provides the following features:

Provides a centralized method to mirror OpenShift Container Platform releases, Operators, helm charts, and other images.
Maintains update paths for OpenShift Container Platform and Operators.
Uses a declarative image set configuration file to include only the OpenShift Container Platform releases, Operators, and images that your cluster needs.
Performs incremental mirroring, which reduces the size of future image sets.

When using the oc-mirror plugin, you specify which content to mirror in an image set configuration file. In this YAML file, you can fine-tune the configuration to only include the OpenShift Container Platform releases and Operators that your cluster needs. This reduces the amount of data that you need to download and transfer. The oc-mirror plugin can also mirror arbitrary helm charts and additional container images to assist users in seamlessly synchronizing their workloads onto mirror registries.

The first time you run the oc-mirror plugin, it populates your mirror registry with the required content to perform your disconnected cluster installation. In order for your disconnected cluster to continue receiving updates, you must keep your mirror registry updated. To update your mirror registry, you run the oc-mirror plugin using the same configuration as the first time you ran it. The oc-mirror plugin references the metadata from the storage backend and only downloads what has been released since the last time you ran the tool. This provides update paths for OpenShift Container Platform and Operators and performs dependency resolution as required.

When using the oc-mirror CLI plugin to populate a mirror registry, any further updates to the mirror registry must be made using the oc-mirror tool.

About the mirror registry

You can mirror the images that are required for OpenShift Container Platform installation and subsequent product updates to a container mirror registry that supports Docker v2-2, such as Red Hat Quay. If you do not have access to a large-scale container registry, you can use the mirror registry for Red Hat OpenShift, which is a small-scale container registry included with OpenShift Container Platform subscriptions.

Regardless of your chosen registry, the procedure to mirror content from Red Hat hosted sites on the internet to an isolated image registry is the same. After you mirror the content, you configure each cluster to retrieve this content from your mirror registry.

The OpenShift image registry cannot be used as the target registry because it does not support pushing without a tag, which is required during the mirroring process.

If choosing a container registry that is not the mirror registry for Red Hat OpenShift, it must be reachable by every machine in the clusters that you provision. If the registry is unreachable, installation, updating, or normal operations such as workload relocation might fail. For that reason, you must run mirror registries in a highly available way, and the mirror registries must at least match the production availability of your OpenShift Container Platform clusters.

When you populate your mirror registry with OpenShift Container Platform images, you can follow two scenarios. If you have a host that can access both the internet and your mirror registry, but not your cluster nodes, you can directly mirror the content from that machine. This process is referred to as connected mirroring. If you have no such host, you must mirror the images to a file system and then bring that host or removable media into your restricted environment. This process is referred to as disconnected mirroring.

For mirrored registries, to view the source of pulled images, you must review the Trying to access log entry in the CRI-O logs. Other methods to view the image pull source, such as using the crictl images command on a node, show the non-mirrored image name, even though the image is pulled from the mirrored location.

Red Hat does not test third party registries with OpenShift Container Platform.

Additional resources

For information about viewing the CRI-O logs to view the image source, see Viewing the image pull source.

Prerequisites

You must have a container image registry that supports Docker v2-2 in the location that will host the OpenShift Container Platform cluster, such as Red Hat Quay.

If you use Red Hat Quay, you must use version 3.6 or later with the oc-mirror plugin. If you have an entitlement to Red Hat Quay, see the documentation on deploying Red Hat Quay for proof-of-concept purposes or by using the Quay Operator. If you need additional assistance selecting and installing a registry, contact your sales representative or Red Hat Support.

If you do not already have an existing solution for a container image registry, subscribers of OpenShift Container Platform are provided a mirror registry for Red Hat OpenShift. The mirror registry for Red Hat OpenShift is included with your subscription and is a small-scale container registry that can be used to mirror the required container images of OpenShift Container Platform in disconnected installations.

Preparing your mirror hosts

Before you can use the oc-mirror plugin to mirror images, you must install the plugin and create a container image registry credentials file to allow the mirroring from Red Hat to your mirror.

Installing the oc-mirror OpenShift CLI plugin

To use the oc-mirror OpenShift CLI plugin to mirror registry images, you must install the plugin. If you are mirroring image sets in a fully disconnected environment, ensure that you install the oc-mirror plugin on the host with internet access and the host in the disconnected environment with access to the mirror registry.

Prerequisites

You have installed the OpenShift CLI (oc).

Procedure

Download the oc-mirror CLI plugin.
1. Navigate to the Downloads page of the OpenShift Cluster Manager.
2. Under the OpenShift disconnected installation tools section, click Download for OpenShift Client (oc) mirror plugin and save the file.
Extract the archive:
```
$ tar xvzf oc-mirror.tar.gz
```
If necessary, update the plugin file to be executable:
```
$ chmod +x oc-mirror
```
Do not rename the oc-mirror file.
Install the oc-mirror CLI plugin by placing the file in your PATH, for example, /usr/local/bin:
```
$ sudo mv oc-mirror /usr/local/bin/.
```

Verification

Run oc mirror help to verify that the plugin was successfully installed:
```
$ oc mirror help
```

Additional resources

Installing and using CLI plugins

Configuring credentials that allow images to be mirrored

Create a container image registry credentials file that allows mirroring images from Red Hat to your mirror.

Do not use this image registry credentials file as the pull secret when you install a cluster. If you provide this file when you install cluster, all of the machines in the cluster will have write access to your mirror registry.

This process requires that you have write access to a container image registry on the mirror registry and adds the credentials to a registry pull secret.

Prerequisites

You configured a mirror registry to use in your disconnected environment.
You identified an image repository location on your mirror registry to mirror images into.
You provisioned a mirror registry account that allows images to be uploaded to that image repository.

Procedure

Complete the following steps on the installation host:

Download your registry.redhat.io pull secret from the Red Hat OpenShift Cluster Manager.
Make a copy of your pull secret in JSON format:
```
$ cat ./pull-secret | jq . > <path>/<pull_secret_file_in_json> (1)
```
1 Specify the path to the folder to store the pull secret in and a name for the JSON file that you create.

Save the file either as ~/.docker/config.json or $XDG_RUNTIME_DIR/containers/auth.json.

The contents of the file resemble the following example:

{
  "auths": {
    "cloud.openshift.com": {
      "auth": "b3BlbnNo...",
      "email": "you@example.com"
    },
    "quay.io": {
      "auth": "b3BlbnNo...",
      "email": "you@example.com"
    },
    "registry.connect.redhat.com": {
      "auth": "NTE3Njg5Nj...",
      "email": "you@example.com"
    },
    "registry.redhat.io": {
      "auth": "NTE3Njg5Nj...",
      "email": "you@example.com"
    }
  }
}

Generate the base64-encoded user name and password or token for your mirror registry:
```
$ echo -n '<user_name>:<password>' | base64 -w0 (1)
BGVtbYk3ZHAtqXs=
```
1 For <user_name> and <password>, specify the user name and password that you configured for your registry.

Edit the JSON file and add a section that describes your registry to it:

  "auths": {
    "<mirror_registry>": { (1)
      "auth": "<credentials>", (2)
      "email": "you@example.com"
    }
  },

1	For `<mirror_registry>`, specify the registry domain name, and optionally the port, that your mirror registry uses to serve content. For example, `registry.example.com` or `registry.example.com:8443`
2	For `<credentials>`, specify the base64-encoded user name and password for the mirror registry.

The file resembles the following example:

{
  "auths": {
    "registry.example.com": {
      "auth": "BGVtbYk3ZHAtqXs=",
      "email": "you@example.com"
    },
    "cloud.openshift.com": {
      "auth": "b3BlbnNo...",
      "email": "you@example.com"
    },
    "quay.io": {
      "auth": "b3BlbnNo...",
      "email": "you@example.com"
    },
    "registry.connect.redhat.com": {
      "auth": "NTE3Njg5Nj...",
      "email": "you@example.com"
    },
    "registry.redhat.io": {
      "auth": "NTE3Njg5Nj...",
      "email": "you@example.com"
    }
  }
}

Creating the image set configuration

Before you can use the oc-mirror plugin to mirror image sets, you must create an image set configuration file. This image set configuration file defines which OpenShift Container Platform releases, Operators, and other images to mirror, along with other configuration settings for the oc-mirror plugin.

You must specify a storage backend in the image set configuration file. This storage backend can be a local directory or a registry that supports Docker v2-2. The oc-mirror plugin stores metadata in this storage backend during image set creation.

Do not delete or modify the metadata that is generated by the oc-mirror plugin. You must use the same storage backend every time you run the oc-mirror plugin for the same mirror registry.

Procedure

Create an ImageSetConfiguration resource that specifies the necessary configuration details:

Example ImageSetConfiguration file

apiVersion: mirror.openshift.io/v1alpha1
kind: ImageSetConfiguration
archiveSize: 4 (1)
mirror:
 ocp:
   channels:
     - name: stable-4.9 (2)
 operators:
   - catalog: registry.redhat.io/redhat/redhat-operator-index:v4.9 (3)
storageConfig: (4)
 registry:
   imageURL: example.com/example/oc-mirror (5)

1	The maximum size, in GiB, of each file within the image set.
2	The channel to retrieve the OpenShift Container Platform images from.
3	The Operator catalog to retrieve the OpenShift Container Platform images from.
4	The back-end location to save the image set metadata to. This location can be a registry or local directory. It is required to specify `storageConfig` values.
5	The registry URL for the storage backend.

This example pulls images from the stable-4.9 channel for the registry.redhat.io/redhat/redhat-operator-index:v4.9 operator catalog and saves the image set metadata to the example.com/example/oc-mirror registry.

Save the file as imageset-config.yaml. This file is required by the oc mirror command when mirroring content.

Additional resources

Mirroring an image set to a mirror registry

You can use the oc-mirror CLI plugin to mirror images to a mirror registry in a partially disconnected environment or in a fully disconnected environment.

These procedures assume that you already have your mirror registry set up.

Mirroring an image set in a partially disconnected environment

In a partially disconnected environment, you can mirror an image set directly to the target mirror registry.

Mirroring from mirror to mirror

You can use the oc-mirror plugin to mirror an image set directly to a target mirror registry that is accessible during image set creation.

Depending on the configuration specified in the image set configuration file, using oc-mirror to mirror images might download several hundreds of gigabytes of data to disk before mirroring to the destination mirror registry.

The initial image set download when you populate the mirror registry is often the largest. Because you only download the images that changed since the last time you ran the command, when you run the oc-mirror plugin again, the generated image set is often smaller.

You are required to specify a storage backend in the image set configuration file. This storage backend can be a local directory or a Docker v2 registry. The oc-mirror plugin stores metadata in this storage backend during image set creation.

Do not delete or modify the metadata that is generated by the oc-mirror plugin. You must use the same storage backend every time you run the oc-mirror plugin for the same mirror registry.

Prerequisites

You have access to the internet to obtain the necessary container images.
You have installed the OpenShift CLI (oc).
You have installed the oc-mirror CLI plugin.
You have created the image set configuration file.

Procedure

Run the oc mirror command to mirror the images from the specified image set configuration to a specified registry:

$ oc mirror --config=./imageset-config.yaml \ (1)
  docker://registry.example:5000              (2)

1	Pass in the image set configuration file that was created. This procedure assumes that it is named `imageset-config.yaml`.
2	Specify the registry to mirror the image set file to. The registry must start with `docker://`. If you specify a top-level namespace for the mirror registry, you must also use this same namespace on subsequent executions.

Verification

Navigate into the oc-mirror-workspace/ directory that was generated.
Navigate into the results directory, for example, results-1639608409/.
Verify that YAML files are present for the ImageContentSourcePolicy and CatalogSource resources.

Next steps

Configure your cluster to use the resources generated by oc-mirror.

Mirroring an image set in a fully disconnected environment

To mirror an image set in a fully disconnected environment, you must first mirror the image set to disk, then mirror the image set file on disk to a mirror.

Mirroring from mirror to disk

You can use the oc-mirror plugin to generate an image set and save the contents to disk. The generated image set can then be transferred to the disconnected environment and mirrored to the target registry.

Depending on the configuration specified in the image set configuration file, using oc-mirror to mirror images might download several hundreds of gigabytes of data to disk.

You are required to specify a storage backend in the image set configuration file. This storage backend can be a local directory or a docker v2 registry. The oc-mirror plugin stores metadata in this storage backend during image set creation.

Do not delete or modify the metadata that is generated by the oc-mirror plugin. You must use the same storage backend every time you run the oc-mirror plugin for the same mirror registry.

Prerequisites

You have access to the internet to obtain the necessary container images.
You have installed the OpenShift CLI (oc).
You have installed the oc-mirror CLI plugin.
You have created the image set configuration file.

Procedure

Run the oc mirror command to mirror the images from the specified image set configuration to disk:

$ oc mirror --config=./imageset-config.yaml \ (1)
  file://<path_to_output_directory>          (2)

1	Pass in the image set configuration file that was created. This procedure assumes that it is named `imageset-config.yaml`.
2	Specify the target directory where you want to output the image set file. The target directory path must start with `file://`.

Verification

Navigate to your output directory:
```
$ cd <path_to_output_directory>
```
Verify that an image set .tar file was created:
```
$ ls
```
Example output
```
mirror_seq1_000000.tar
```

Next steps

Transfer the image set .tar file to the disconnected environment.

Mirroring from disk to mirror

You can use the oc-mirror plugin to mirror the contents of a generated image set to the target mirror registry.

Prerequisites

You have installed the OpenShift CLI (oc) in the disconnected environment.
You have installed the oc-mirror CLI plugin in the disconnected environment.
You have generated the image set file by using the oc mirror command.
You have transferred the image set file to the disconnected environment.

Procedure

Run the oc mirror command to process the image set file on disk and mirror the contents to a target mirror registry:

$ oc mirror --from=./mirror_seq1_000000.tar \ (1)
  docker://registry.example:5000              (2)

1	Pass in the image set .tar file to mirror, named `mirror_seq1_000000.tar` in this example. If an `archiveSize` value was specified in the image set configuration file, the image set might be broken up into multiple .tar files. In this situation, you can pass in a directory that contains the image set .tar files.
2	Specify the registry to mirror the image set file to. The registry must start with `docker://`. If you specify a top-level namespace for the mirror registry, you must also use this same namespace on subsequent executions.

This command updates the mirror registry with the image set and generates the ImageContentSourcePolicy and CatalogSource resources.

Verification

Navigate into the oc-mirror-workspace/ directory that was generated.
Navigate into the results directory, for example, results-1639608409/.
Verify that YAML files are present for the ImageContentSourcePolicy and CatalogSource resources.

Next steps

Configure your cluster to use the resources generated by oc-mirror.

Configuring your cluster to use the resources generated by oc-mirror

After you have mirrored your image set to the mirror registry, you must apply the generated ImageContentSourcePolicy, CatalogSource, and release image signature resources into the cluster.

The ImageContentSourcePolicy resource associates the mirror registry with the source registry and redirects image pull requests from the online registries to the mirror registry. The CatalogSource resource is used by Operator Lifecycle Manager (OLM) to retrieve information about the available Operators in the mirror registry. The release image signatures are used to verify the mirrored release images.

Prerequisites

You have mirrored the image set to the registry mirror in the disconnected environment.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Log in to the OpenShift CLI as a user with the cluster-admin role.
Apply the YAML files from the results directory to the cluster by running the following command:
```
$ oc apply -f ./oc-mirror-workspace/results-1639608409/
```
Apply the release image signatures to the cluster by running the following command:
```
$ oc apply -f ./oc-mirror-workspace/results-1639608409/release-signatures/
```

Verification

Verify that the ImageContentSourcePolicy resources were successfully installed by running the following command:
```
$ oc get imagecontentsourcepolicy --all-namespaces
```
Verify that the CatalogSource resources were successfully installed by running the following command:
```
$ oc get catalogsource --all-namespaces
```

Updating your mirror registry

After you publish a full image set to the mirror registry, you can use the oc-mirror plugin to update the mirror registry with updated images.

When you run the oc-mirror plugin again, it generates an image set that only contains new and updated images since the previous execution.

You must use the same storage backend as the initial execution of oc-mirror for the same mirror registry. Do not delete or modify the metadata that is generated by the oc-mirror plugin.

Because it only pulls in the differences since the previous image set was created, the generated image set is often smaller and faster to process than the initial image set.

Generated image sets are sequential and must be synchronized to the target mirror registry in order.

Prerequisites

You have used the oc-mirror plugin to mirror the initial image set to your mirror registry.
You have access to the storage backend that was used for the initial execution of the oc-mirror plugin.

Procedure

Follow the same steps that you used to create the initial image set and mirror it to the mirror registry. For instructions, see Mirroring an image set in a partially disconnected environment or Mirroring an image set in a fully disconnected environment.

You must provide the same storage backend so that only a differential image set is created and mirrored.
If you specified a top-level namespace for the mirror registry during the initial image set creation, then you must use this same namespace every time you run the oc-mirror plugin for the same mirror registry.

Configure your cluster to use the resources generated by oc-mirror.

Additional resources

Image set configuration parameters

The oc-mirror plugin requires an image set configuration file that defines what images to mirror. The following table lists the available parameters for the ImageSetConfiguration resource.

Table 1. `ImageSetConfiguration` parameters
Parameter	Description	Values
`apiVersion`	The API version for the `ImageSetConfiguration` content.	String. For example: `mirror.openshift.io/v1alpha1`.
`archiveSize`	The maximum size, in GiB, of each archive file within the image set.	Integer. For example: `4`
`mirror`	The configuration of the image set.	Object
`mirror.additionalImages`	The additional images configuration of the image set.	Array of objects. For example: `additionalImages: - name: registry.redhat.io/ubi8/ubi:latest`
`mirror.additionalImages.name`	The tag of the image to mirror.	String. For example: `registry.redhat.io/ubi8/ubi:latest`
`mirror.helm`	The helm configuration of the image set. Note that the oc-mirror plugin supports only helm charts that do not require user input when rendered.	Object
`mirror.helm.local`	The local helm charts to mirror.	Array of objects. For example: `local: - name: podinfo path: /test/podinfo-5.0.0.tar.gz`
`mirror.helm.local.name`	The name of the local helm chart to mirror.	String. For example: `podinfo`.
`mirror.helm.local.path`	The path of the local helm chart to mirror.	String. For example: `/test/podinfo-5.0.0.tar.gz`.
`mirror.helm.repos`	The remote helm repositories to mirror from.	Array of objects. For example: `repos: - name: podinfo url: https://example.github.io/podinfo charts: - name: podinfo version: 5.0.0`
`mirror.helm.repos.name`	The name of the helm repository to mirror from.	String. For example: `podinfo`.
`mirror.helm.repos.url`	The URL of the helm repository to mirror from.	String. For example: `https://example.github.io/podinfo`.
`mirror.helm.repos.charts`	The remote helm charts to mirror.	Array of objects.
`mirror.helm.repos.charts.name`	The name of the helm chart to mirror.	String. For example: `podinfo`.
`mirror.helm.repos.charts.version`	The version of the named helm chart to mirror.	String. For example: `5.0.0`.
`mirror.ocp`	The platform configuration of the image set.	Object
`mirror.ocp.channels`	The platform channel configuration of the image set.	Array of objects. For example: `channels: - name: stable-4.7 - name: stable-4.6 versions: - '4.6.36'`
`mirror.ocp.channels.name`	The name of the release channel.	String. For example: `stable-4.9` or `okd`.
`mirror.ocp.channels.versions`	The list of release versions within the named channel.	String. For example: `4.9.6`.
`mirror.operators`	The Operators configuration of the image set.	Array of objects. For example: `operators: - catalog: registry.redhat.io/redhat/redhat-operator-index:v4.9 headsOnly: false packages: - name: elasticsearch-operator startingVersion: '2.4.0'`
`mirror.operators.catalog`	The Operator catalog to include in the image set.	String. For example: `registry.redhat.io/redhat/redhat-operator-index:v4.9`.
`mirror.operators.headsOnly`	Toggles between downloading channel HEADs and full channels. Cannot be used in conjunction with `mirror.operators.packages`.	Boolean
`mirror.operators.packages`	The Operator packages configuration.	Array of objects. For example: `operators: - catalog: registry.redhat.io/redhat/redhat-operator-index:v4.8 headsOnly: false packages: - name: elasticsearch-operator startingVersion: '5.2.3-31'`
`mirror.operators.packages.name`	The Operator package name to include in the image set	String. For example: `elasticsearch-operator`.
`mirror.operators.packages.startingVersion`	The starting version of the Operator package to mirror. All versions of the Operator are mirrored between the value of `startingVersion` and the HEAD version of each channel that contains the referenced version.	String. For example: `5.2.3-31`.
`mirror.operators.packages.channels`	The Operator package channel configuration.	Object
`mirror.operators.packages.channels.name`	The Operator channel name, unique within a package, to include in the image set.	String. For example: `fast` or `stable-v4.9`.
`mirror.operators.packages.channels.startingVersion`	The starting version of the Operator channel to mirror. All versions of the Operator are mirrored between the value of `startingVersion` and the HEAD version of the specified channel.	String. For example: `5.2.3-31`
`storageConfig`	The back-end configuration of the image set.	Object
`storageConfig.local`	The local back-end configuration of the image set.	Object
`storageConfig.local.path`	The path of the directory to contain the image set metadata.	String. For example: `./path/to/dir/`.
`storageConfig.registry`	The registry back-end configuration of the image set.	Object
`storageConfig.registry.imageURL`	The back-end registry URI. Can optionally include a namespace reference in the URI.	String. For example: `quay.io/myuser/imageset:metadata`.
`storageConfig.registry.skipTLS`	Optionally skip TLS verification of the referenced back-end registry.	Boolean. The default value is `false`.

Image set configuration examples

The following ImageSetConfiguration file examples show the configuration for various mirroring use cases.

Use case: Including arbitrary images and helm charts

The following ImageSetConfiguration file uses a registry storage backend and includes helm charts and an additional Red Hat Universal Base Image (UBI).

Example ImageSetConfiguration file

apiVersion: mirror.openshift.io/v1alpha1
kind: ImageSetConfiguration
archiveSize: 4
storageConfig:
 registry:
   imageURL: example.com/example/oc-mirror
   skipTLS: false
mirror:
 ocp:
   channels:
     - name: stable-4.10
 operators:
   - catalog: registry.redhat.io/redhat/redhat-operator-index:v4.10
 helm:
   repos:
     - name: redhat-helm-charts
       url: https://raw.githubusercontent.com/redhat-developer/redhat-helm-charts/master
       charts:
         - name: ibm-mongodb-enterprise-helm
           version: 0.2.0
 additionalImages:
   - name: registry.redhat.io/ubi8/ubi:latest

Use case: Including specific Operator versions

The following ImageSetConfiguration file uses a local storage backend and includes only the Red Hat Advanced Cluster Security for Kubernetes Operator, versions starting at 3.67.0 and later.

Example ImageSetConfiguration file

apiVersion: mirror.openshift.io/v1alpha1
kind: ImageSetConfiguration
storageConfig:
  local:
    path: /home/user/metadata
mirror:
  operators:
    - catalog: registry.redhat.io/redhat/redhat-operator-index:v4.10
      headsOnly: false
      packages:
        - name: rhacs-operator
          channels:
          - name: latest
          startingVersion: 3.67.0

Command reference for oc-mirror

The following tables describe the oc mirror subcommands and flags:

Table 2. oc mirror subcommands
Subcommand	Description
`completion`	Generate the autocompletion script for the specified shell.
`describe`	Output the contents of an image set.
`help`	Show help about any subcommand.
`list`	List available platform and Operator content and their version.
`version`	Output the oc-mirror version.

Table 3. oc mirror flags
Flag	Description
`-c`, `--config` `<string>`	Specify the path to an image set configuration file.
`--continue-on-error`	If any non image-pull related error occurs, continue and attempt to mirror as much as possible.
`--dest-skip-tls`	Disable TLS validation for the target registry.
`--dest-use-http`	Use plain HTTP for the target registry.
`--dry-run`	Print actions without mirroring images.
`--from <string>`	Specify the path to an image set archive that was generated by an execution of oc-mirror to load into a target registry.
`-h`, `--help`	Show the help.
`--log-level <string>`	Specify the number for the log level verbosity. Valid values are `0` - `9`. The default is `0`.
`--manifests-only`	Generate manifests for `ImageContentSourcePolicy` objects to configure a cluster to use the mirror registry, but do not actually mirror any images. To use this flag, you must pass in an image set archive with the `--from` flag.
`--skip-cleanup`	Skip removal of artifact directories.
`--skip-image-pin`	Do not replace image tags with digest pins in Operator catalogs.
`--skip-missing`	If an image is not found, skip it instead of reporting an error and aborting execution. Does not apply to custom images explicitly specified in the image set configuration.
`--skip-verification`	Skip digest verification.
`--source-skip-tls`	Disable TLS validation for the source registry.
`--source-use-http`	Use plain HTTP for the source registry.