This is a cache of https://docs.openshift.com/container-platform/4.12/scalability_and_performance/ztp_far_edge/ztp-deploying-far-edge-sites.html. It is a snapshot of the page at 2024-11-25T12:37:45.172+0000.
Installing managed clusters with RHACM and SiteConfig resources - Clusters at the network far edge | Scalability and performance | OpenShift Container Platform 4.12
    OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Installing managed clusters with RHACM and SiteConfig resources

GitOps ZTP and Topology Aware Lifecycle Manager

GitOps zero touch provisioning (ZTP) generates installation and configuration CRs from manifests stored in Git. These artifacts are applied to a centralized hub cluster where Red Hat Advanced Cluster Management (RHACM), the assisted service, and the Topology Aware Lifecycle Manager (TALM) use the CRs to install and configure the managed cluster. The configuration phase of the ZTP pipeline uses the TALM to orchestrate the application of the configuration CRs to the cluster. There are several key integration points between GitOps ZTP and the TALM.

Inform policies

By default, GitOps ZTP creates all policies with a remediation action of inform. These policies cause RHACM to report on compliance status of clusters relevant to the policies but does not apply the desired configuration. During the ZTP process, after OpenShift installation, the TALM steps through the created inform policies and enforces them on the target managed cluster(s). This applies the configuration to the managed cluster. Outside of the ZTP phase of the cluster lifecycle, this allows you to change policies without the risk of immediately rolling those changes out to affected managed clusters. You can control the timing and the set of remediated clusters by using TALM.

Automatic creation of ClusterGroupUpgrade CRs

To automate the initial configuration of newly deployed clusters, TALM monitors the state of all ManagedCluster CRs on the hub cluster. Any ManagedCluster CR that does not have a ztp-done label applied, including newly created ManagedCluster CRs, causes the TALM to automatically create a ClusterGroupUpgrade CR with the following characteristics:

  • The ClusterGroupUpgrade CR is created and enabled in the ztp-install namespace.

  • ClusterGroupUpgrade CR has the same name as the ManagedCluster CR.

  • The cluster selector includes only the cluster associated with that ManagedCluster CR.

  • The set of managed policies includes all policies that RHACM has bound to the cluster at the time the ClusterGroupUpgrade is created.

  • Pre-caching is disabled.

  • Timeout set to 4 hours (240 minutes).

The automatic creation of an enabled ClusterGroupUpgrade ensures that initial zero-touch deployment of clusters proceeds without the need for user intervention. Additionally, the automatic creation of a ClusterGroupUpgrade CR for any ManagedCluster without the ztp-done label allows a failed ZTP installation to be restarted by simply deleting the ClusterGroupUpgrade CR for the cluster.

Waves

Each policy generated from a PolicyGenTemplate CR includes a ztp-deploy-wave annotation. This annotation is based on the same annotation from each CR which is included in that policy. The wave annotation is used to order the policies in the auto-generated ClusterGroupUpgrade CR. The wave annotation is not used other than for the auto-generated ClusterGroupUpgrade CR.

All CRs in the same policy must have the same setting for the ztp-deploy-wave annotation. The default value of this annotation for each CR can be overridden in the PolicyGenTemplate. The wave annotation in the source CR is used for determining and setting the policy wave annotation. This annotation is removed from each built CR which is included in the generated policy at runtime.

The TALM applies the configuration policies in the order specified by the wave annotations. The TALM waits for each policy to be compliant before moving to the next policy. It is important to ensure that the wave annotation for each CR takes into account any prerequisites for those CRs to be applied to the cluster. For example, an Operator must be installed before or concurrently with the configuration for the Operator. Similarly, the CatalogSource for an Operator must be installed in a wave before or concurrently with the Operator Subscription. The default wave value for each CR takes these prerequisites into account.

Multiple CRs and policies can share the same wave number. Having fewer policies can result in faster deployments and lower CPU usage. It is a best practice to group many CRs into relatively few waves.

To check the default wave value in each source CR, run the following command against the out/source-crs directory that is extracted from the ztp-site-generate container image:

$ grep -r "ztp-deploy-wave" out/source-crs
Phase labels

The ClusterGroupUpgrade CR is automatically created and includes directives to annotate the ManagedCluster CR with labels at the start and end of the ZTP process.

When ZTP configuration postinstallation commences, the ManagedCluster has the ztp-running label applied. When all policies are remediated to the cluster and are fully compliant, these directives cause the TALM to remove the ztp-running label and apply the ztp-done label.

For deployments that make use of the informDuValidator policy, the ztp-done label is applied when the cluster is fully ready for deployment of applications. This includes all reconciliation and resulting effects of the ZTP applied configuration CRs. The ztp-done label affects automatic ClusterGroupUpgrade CR creation by TALM. Do not manipulate this label after the initial ZTP installation of the cluster.

Linked CRs

The automatically created ClusterGroupUpgrade CR has the owner reference set as the ManagedCluster from which it was derived. This reference ensures that deleting the ManagedCluster CR causes the instance of the ClusterGroupUpgrade to be deleted along with any supporting resources.

Overview of deploying managed clusters with ZTP

Red Hat Advanced Cluster Management (RHACM) uses zero touch provisioning (ZTP) to deploy single-node OpenShift Container Platform clusters, three-node clusters, and standard clusters. You manage site configuration data as OpenShift Container Platform custom resources (CRs) in a Git repository. ZTP uses a declarative GitOps approach for a develop once, deploy anywhere model to deploy the managed clusters.

The deployment of the clusters includes:

  • Installing the host operating system (RHCOS) on a blank server

  • Deploying OpenShift Container Platform

  • Creating cluster policies and site subscriptions

  • Making the necessary network configurations to the server operating system

  • Deploying profile Operators and performing any needed software-related configuration, such as performance profile, PTP, and SR-IOV

Overview of the managed site installation process

After you apply the managed site custom resources (CRs) on the hub cluster, the following actions happen automatically:

  1. A Discovery image ISO file is generated and booted on the target host.

  2. When the ISO file successfully boots on the target host it reports the host hardware information to RHACM.

  3. After all hosts are discovered, OpenShift Container Platform is installed.

  4. When OpenShift Container Platform finishes installing, the hub installs the klusterlet service on the target cluster.

  5. The requested add-on services are installed on the target cluster.

The Discovery image ISO process is complete when the Agent CR for the managed cluster is created on the hub cluster.

The target bare-metal host must meet the networking, firmware, and hardware requirements listed in Recommended single-node OpenShift cluster configuration for vDU application workloads.

Creating the managed bare-metal host secrets

Add the required secret custom resources (CRs) for the managed bare-metal host to the hub cluster. You need a secret for the ZTP pipeline to access the Baseboard Management Controller (BMC) and a secret for the assisted installer service to pull cluster installation images from the registry.

The secrets are referenced from the SiteConfig CR by name. The namespace must match the SiteConfig namespace.
Procedure

  1. Create a YAML secret file containing credentials for the host Baseboard Management Controller (BMC) and a pull secret required for installing OpenShift and all add-on cluster Operators:

    1. Save the following YAML as the file example-sno-secret.yaml:

      apiVersion: v1
kind: secret
metadata:
  name: example-sno-bmc-secret
  namespace: example-sno (1)
data: (2)
  password: <base64_password>
  username: <base64_username>
type: Opaque
---
apiVersion: v1
kind: secret
metadata:
  name: pull-secret
  namespace: example-sno  (3)
data:
  .dockerconfigjson: <pull_secret> (4)
type: kubernetes.io/dockerconfigjson
      1 Must match the namespace configured in the related SiteConfig CR
      2 Base64-encoded values for password and username
      3 Must match the namespace configured in the related SiteConfig CR
      4 Base64-encoded pull secret

  2. Add the relative path to example-sno-secret.yaml to the kustomization.yaml file that you use to install the cluster.

Configuring Discovery ISO kernel arguments for installations using GitOps ZTP

The GitOps ZTP workflow uses the Discovery ISO as part of the OpenShift Container Platform installation process on managed bare-metal hosts. You can edit the InfraEnv resource to specify kernel arguments for the Discovery ISO. This is useful for cluster installations with specific environmental requirements. For example, configure the rd.net.timeout.carrier kernel argument for the Discovery ISO to facilitate static networking for the cluster or to receive a DHCP address before downloading the root file system during installation.

In OpenShift Container Platform 4.12, you can only add kernel arguments. You can not replace or delete kernel arguments.
Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Create the InfraEnv CR and edit the spec.kernelArguments specification to configure kernel arguments.

    1. Save the following YAML in an InfraEnv-example.yaml file:

      The InfraEnv CR in this example uses template syntax such as {{ .Cluster.ClusterName }} that is populated based on values in the SiteConfig CR. The SiteConfig CR automatically populates values for these templates during deployment. Do not edit the templates manually.

      		 
      apiVersion: agent-install.openshift.io/v1beta1
kind: InfraEnv
metadata:
  annotations:
    argocd.argoproj.io/sync-wave: "1"
  name: "{{ .Cluster.ClusterName }}"
  namespace: "{{ .Cluster.ClusterName }}"
spec:
  clusterRef:
    name: "{{ .Cluster.ClusterName }}"
    namespace: "{{ .Cluster.ClusterName }}"
  kernelArguments:
    - operation: append (1)
      value: audit=0 (2)
    - operation: append
      value: trace=1
  sshAuthorizedKey: "{{ .Site.SshPublicKey }}"
  proxy: "{{ .Cluster.ProxySettings }}"
  pullsecretRef:
    name: "{{ .Site.PullsecretRef.Name }}"
  ignitionConfigOverride: "{{ .Cluster.IgnitionConfigOverride }}"
  nmStateConfigLabelSelector:
    matchLabels:
      nmstate-label: "{{ .Cluster.ClusterName }}"
  additionalNTPSources: "{{ .Cluster.AdditionalNTPSources }}"
      1 Specify the append operation to add a kernel argument.
      2 Specify the kernel argument you want to configure. This example configures the audit kernel argument and the trace kernel argument.

  2. Commit the InfraEnv-example.yaml CR to the same location in your Git repository that has the SiteConfig CR and push your changes. The following example shows a sample Git repository structure:

    ~/example-ztp/install
          └── site-install
               ├── siteconfig-example.yaml
               ├── InfraEnv-example.yaml
               ...

  3. Edit the spec.clusters.crTemplates specification in the SiteConfig CR to reference the InfraEnv-example.yaml CR in your Git repository:

    clusters:
  crTemplates:
    InfraEnv: "InfraEnv-example.yaml"

    When you are ready to deploy your cluster by committing and pushing the SiteConfig CR, the build pipeline uses the custom InfraEnv-example CR in your Git repository to configure the infrastructure environment, including the custom kernel arguments.

Verification

To verify that the kernel arguments are applied, after the Discovery image verifies that OpenShift Container Platform is ready for installation, you can SSH to the target host before the installation process begins. At that point, you can view the kernel arguments for the Discovery ISO in the /proc/cmdline file.

  1. Begin an SSH session with the target host:

    $ ssh -i /path/to/privatekey core@<host_name>

  2. View the system’s kernel arguments by using the following command:

    $ cat /proc/cmdline

Deploying a managed cluster with SiteConfig and ZTP

Use the following procedure to create a SiteConfig custom resource (CR) and related files and initiate the zero touch provisioning (ZTP) cluster deployment.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

  • You configured the hub cluster for generating the required installation and policy CRs.

  • You created a Git repository where you manage your custom site configuration data. The repository must be accessible from the hub cluster and you must configure it as a source repository for the ArgoCD application. See "Preparing the GitOps ZTP site configuration repository" for more information.

    When you create the source repository, ensure that you patch the ArgoCD application with the argocd/deployment/argocd-openshift-gitops-patch.json patch-file that you extract from the ztp-site-generate container. See "Configuring the hub cluster with ArgoCD".

  • To be ready for provisioning managed clusters, you require the following for each bare-metal host:

    Network connectivity

    Your network requires DNS. Managed cluster hosts should be reachable from the hub cluster. Ensure that Layer 3 connectivity exists between the hub cluster and the managed cluster host.

    Baseboard Management Controller (BMC) details

    ZTP uses BMC username and password details to connect to the BMC during cluster installation. The GitOps ZTP plugin manages the ManagedCluster CRs on the hub cluster based on the SiteConfig CR in your site Git repo. You create individual BMCsecret CRs for each host manually.

    Procedure

    1. Create the required managed cluster secrets on the hub cluster. These resources must be in a namespace with a name matching the cluster name. For example, in out/argocd/example/siteconfig/example-sno.yaml, the cluster name and namespace is example-sno.

      1. Export the cluster namespace by running the following command:

        $ export CLUSTERNS=example-sno

      2. Create the namespace:

        $ oc create namespace $CLUSTERNS

    2. Create pull secret and BMC secret CRs for the managed cluster. The pull secret must contain all the credentials necessary for installing OpenShift Container Platform and all required Operators. See "Creating the managed bare-metal host secrets" for more information.

      The secrets are referenced from the SiteConfig custom resource (CR) by name. The namespace must match the SiteConfig namespace.

    3. Create a SiteConfig CR for your cluster in your local clone of the Git repository:

      1. Choose the appropriate example for your CR from the out/argocd/example/siteconfig/ folder. The folder includes example files for single node, three-node, and standard clusters:

        • example-sno.yaml

        • example-3node.yaml

        • example-standard.yaml

      2. Change the cluster and host details in the example file to match the type of cluster you want. For example:

        # example-node1-bmh-secret & assisted-deployment-pull-secret need to be created under same namespace example-sno --- apiVersion: ran.openshift.io/v1 kind: SiteConfig metadata: name: "example-sno" namespace: "example-sno" spec: baseDomain: "example.com" pullsecretRef: name: "assisted-deployment-pull-secret" clusterImageSetNameRef: "openshift-4.10" sshPublicKey: "ssh-rsa AAAA…​" clusters: - clusterName: "example-sno" networkType: "OVNKubernetes" # installConfigOverrides is a generic way of passing install-config # parameters through the siteConfig. The 'capabilities' field configures # the composable openshift feature. In this 'capabilities' setting, we # remove all but the marketplace component from the optional set of # components. # Notes: # - OperatorLifecycleManager is needed for 4.15 and later # - NodeTuning is needed for 4.13 and later, not for 4.12 and earlier installConfigOverrides: | { "capabilities": { "baselineCapabilitySet": "None", "additionalEnabledCapabilities": [ "NodeTuning", "OperatorLifecycleManager" ] } } # It is strongly recommended to include crun manifests as part of the additional install-time manifests for 4.13+. # The crun manifests can be obtained from source-crs/optional-extra-manifest/ and added to the git repo ie.sno-extra-manifest. # extraManifestPath: sno-extra-manifest clusterLabels: # These example cluster labels correspond to the bindingRules in the PolicyGenTemplate examples du-profile: "latest" # These example cluster labels correspond to the bindingRules in the PolicyGenTemplate examples in ../policygentemplates: # ../policygentemplates/common-ranGen.yaml will apply to all clusters with 'common: true' common: true # ../policygentemplates/group-du-sno-ranGen.yaml will apply to all clusters with 'group-du-sno: ""' group-du-sno: "" # ../policygentemplates/example-sno-site.yaml will apply to all clusters with 'sites: "example-sno"' # Normally this should match or contain the cluster name so it only applies to a single cluster sites : "example-sno" clusterNetwork: - cidr: 1001:1::/48 hostPrefix: 64 machineNetwork: - cidr: 1111:2222:3333:4444::/64 serviceNetwork: - 1001:2::/112 additionalNTPSources: - 1111:2222:3333:4444::2 # Initiates the cluster for workload partitioning. Setting specific reserved/isolated CPUSets is done via PolicyTemplate # please see Workload Partitioning Feature for a complete guide. cpuPartitioningMode: AllNodes # Optionally; This can be used to override the KlusterletAddonConfig that is created for this cluster: crTemplates: # KlusterletAddonConfig: "KlusterletAddonConfigOverride.yaml" nodes: - hostName: "example-node1.example.com" role: "master" # Optionally; This can be used to configure desired BIOS setting on a host: #biosConfigRef: # filePath: "example-hw.profile" bmcAddress: "idrac-virtualmedia+https://[1111:2222:3333:4444::bbbb:1]/redfish/v1/Systems/System.Embedded.1" bmcCredentialsName: name: "example-node1-bmh-secret" bootMACAddress: "AA:BB:CC:DD:EE:11" # Use UEFISecureBoot to enable secure boot bootMode: "UEFI" rootDeviceHints: deviceName: "/dev/disk/by-path/pci-0000:01:00.0-scsi-0:2:0:0" # disk partition at /var/lib/containers with ignitionConfigOverride. Some values must be updated. See DiskPartitionContainer.md for more details ignitionConfigOverride: | { "ignition": { "version": "3.2.0" }, "storage": { "disks": [ { "device": "/dev/disk/by-path/pci-0000:01:00.0-scsi-0:2:0:0", "partitions": [ { "label": "var-lib-containers", "sizeMiB": 0, "startMiB": 250000 } ], "wipeTable": false } ], "filesystems": [ { "device": "/dev/disk/by-partlabel/var-lib-containers", "format": "xfs", "mountOptions": [ "defaults", "prjquota" ], "path": "/var/lib/containers", "wipeFilesystem": true } ] }, "systemd": { "units": [ { "contents": " Generated by Butane\n[Unit]\nRequires=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\nAfter=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\n\n[Mount]\nWhere=/var/lib/containers\nWhat=/dev/disk/by-partlabel/var-lib-containers\nType=xfs\nOptions=defaults,prjquota\n\n[Install]\nRequiredBy=local-fs.target", "enabled": true, "name": "var-lib-containers.mount" } ] } } nodeNetwork: interfaces: - name: eno1 macAddress: "AA:BB:CC:DD:EE:11" config: interfaces: - name: eno1 type: ethernet state: up ipv4: enabled: false ipv6: enabled: true address: # For SNO sites with static IP addresses, the node-specific, # API and Ingress IPs should all be the same and configured on # the interface - ip: 1111:2222:3333:4444::aaaa:1 prefix-length: 64 dns-resolver: config: search: - example.com server: - 1111:2222:3333:4444::2 routes: config: - destination: ::/0 next-hop-interface: eno1 next-hop-address: 1111:2222:3333:4444::1 table-id: 254

        +

        For more information about BMC addressing, see the "Additional resources" section. The installConfigOverrides and ignitionConfigOverride fields are expanded in the example for ease of readability.

      3. You can inspect the default set of extra-manifest MachineConfig CRs in out/argocd/extra-manifest. It is automatically applied to the cluster when it is installed.

      4. Optional: To provision additional install-time manifests on the provisioned cluster, create a directory in your Git repository, for example, sno-extra-manifest/, and add your custom manifest CRs to this directory. If your SiteConfig.yaml refers to this directory in the extraManifestPath field, any CRs in this referenced directory are appended to the default set of extra manifests.

    4. Add the SiteConfig CR to the kustomization.yaml file in the generators section, similar to the example shown in out/argocd/example/siteconfig/kustomization.yaml.

    5. Commit the SiteConfig CR and associated kustomization.yaml changes in your Git repository and push the changes.

      The ArgoCD pipeline detects the changes and begins the managed cluster deployment.

Additional resources

Single-node OpenShift SiteConfig CR installation reference

Table 1. SiteConfig CR installation options for single-node OpenShift clusters
SiteConfig CR field Description

metadata.name

Set name to assisted-deployment-pull-secret and create the assisted-deployment-pull-secret CR in the same namespace as the SiteConfig CR.

spec.clusterImageSetNameRef

Configure the image set available on the hub cluster for all the clusters in the site. To see the list of supported versions on your hub cluster, run oc get clusterimagesets.

installConfigOverrides

Set the installConfigOverrides field to enable or disable optional components prior to cluster installation.

Use the reference configuration as specified in the example SiteConfig CR. Adding additional components back into the system might require additional reserved CPU capacity.

spec.clusters.clusterLabels

Configure cluster labels to correspond to the bindingRules field in the PolicyGenTemplate CRs that you define. For example, policygentemplates/common-ranGen.yaml applies to all clusters with common: true set, policygentemplates/group-du-sno-ranGen.yaml applies to all clusters with group-du-sno: "" set.

spec.clusters.crTemplates.KlusterletAddonConfig

Optional. Set KlusterletAddonConfig to KlusterletAddonConfigOverride.yaml to override the default `KlusterletAddonConfig that is created for the cluster.

spec.clusters.nodes.hostName

For single-node deployments, define a single host. For three-node deployments, define three hosts. For standard deployments, define three hosts with role: master and two or more hosts defined with role: worker.

spec.clusters.nodes.bmcAddress

BMC address that you use to access the host. Applies to all cluster types. {ztp} supports iPXE and virtual media booting by using Redfish or IPMI protocols. To use iPXE booting, you must use RHACM 2.8 or later. For more information about BMC addressing, see the "Additional resources" section.

spec.clusters.nodes.bmcAddress

BMC address that you use to access the host. Applies to all cluster types. {ztp} supports iPXE and virtual media booting by using Redfish or IPMI protocols. To use iPXE booting, you must use RHACM 2.8 or later. For more information about BMC addressing, see the "Additional resources" section.

In far edge Telco use cases, only virtual media is supported for use with {ztp}.

spec.clusters.nodes.bmcCredentialsName

Configure the bmh-secret CR that you separately create with the host BMC credentials. When creating the bmh-secret CR, use the same namespace as the SiteConfig CR that provisions the host.

spec.clusters.nodes.bootMode

Set the boot mode for the host to UEFI. The default value is UEFI. Use UEFISecureBoot to enable secure boot on the host.

spec.clusters.nodes.rootDeviceHints

Specifies the device for deployment. Identifiers that are stable across reboots are recommended. For example, wwn: <disk_wwn> or deviceName: /dev/disk/by-path/<device_path>. Values using a by-path scheme are preferred. For a detailed list of stable identifiers, see the "About root device hints" section.

spec.clusters.nodes.cpuset

Configure cpuset to match the value that you set in the cluster PerformanceProfile CR spec.cpu.reserved field for workload partitioning. For example, cpuset: "0-1,40-41".

spec.clusters.nodes.nodeNetwork

Configure the network settings for the node.

spec.clusters.nodes.nodeNetwork.config.interfaces.ipv6

Configure the IPv6 address for the host. For single-node OpenShift clusters with static IP addresses, the node-specific API and Ingress IPs should be the same.

Monitoring managed cluster installation progress

The ArgoCD pipeline uses the SiteConfig CR to generate the cluster configuration CRs and syncs it with the hub cluster. You can monitor the progress of the synchronization in the ArgoCD dashboard.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

When the synchronization is complete, the installation generally proceeds as follows:

  1. The Assisted Service Operator installs OpenShift Container Platform on the cluster. You can monitor the progress of cluster installation from the RHACM dashboard or from the command line by running the following commands:

    1. Export the cluster name:

      $ export CLUSTER=<clusterName>

    2. Query the AgentClusterInstall CR for the managed cluster:

      $ oc get agentclusterinstall -n $CLUSTER $CLUSTER -o jsonpath='{.status.conditions[?(@.type=="Completed")]}' | jq

    3. Get the installation events for the cluster:

      $ curl -sk $(oc get agentclusterinstall -n $CLUSTER $CLUSTER -o jsonpath='{.status.debugInfo.eventsURL}')  | jq '.[-2,-1]'

Troubleshooting GitOps ZTP by validating the installation CRs

The ArgoCD pipeline uses the SiteConfig and PolicyGenTemplate custom resources (CRs) to generate the cluster configuration CRs and Red Hat Advanced Cluster Management (RHACM) policies. Use the following steps to troubleshoot issues that might occur during this process.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Check that the installation CRs were created by using the following command:

    $ oc get AgentClusterInstall -n <cluster_name>

    If no object is returned, use the following steps to troubleshoot the ArgoCD pipeline flow from SiteConfig files to the installation CRs.

  2. Verify that the ManagedCluster CR was generated using the SiteConfig CR on the hub cluster:

    $ oc get managedcluster

  3. If the ManagedCluster is missing, check if the clusters application failed to synchronize the files from the Git repository to the hub cluster:

    $ oc describe -n openshift-gitops application clusters

    1. Check for the Status.Conditions field to view the error logs for the managed cluster. For example, setting an invalid value for extraManifestPath: in the SiteConfig CR raises the following error:

      Status:
  Conditions:
    Last Transition Time:  2021-11-26T17:21:39Z
    Message:               rpc error: code = Unknown desc = `kustomize build /tmp/https___git.com/ran-sites/siteconfigs/ --enable-alpha-plugins` failed exit status 1: 2021/11/26 17:21:40 Error could not create extra-manifest ranSite1.extra-manifest3 stat extra-manifest3: no such file or directory 2021/11/26 17:21:40 Error: could not build the entire SiteConfig defined by /tmp/kust-plugin-config-913473579: stat extra-manifest3: no such file or directory Error: failure in plugin configured via /tmp/kust-plugin-config-913473579; exit status 1: exit status 1
    Type:  ComparisonError

    2. Check the Status.Sync field. If there are log errors, the Status.Sync field could indicate an Unknown error:

      Status:
  Sync:
    Compared To:
      Destination:
        Namespace:  clusters-sub
        Server:     https://kubernetes.default.svc
      Source:
        Path:             sites-config
        Repo URL:         https://git.com/ran-sites/siteconfigs/.git
        Target Revision:  master
    Status:               Unknown

Troubleshooting {ztp} virtual media booting on Supermicro servers

SuperMicro X11 servers do not support virtual media installations when the image is served using the https protocol. As a result, single-node OpenShift deployments for this environment fail to boot on the target node. To avoid this issue, log in to the hub cluster and disable Transport Layer Security (TLS) in the Provisioning resource. This ensures the image is not served with TLS even though the image address uses the https scheme.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Disable TLS in the Provisioning resource by running the following command:

    $ oc patch provisioning provisioning-configuration --type merge -p '{"spec":{"disableVirtualMediaTLS": true}}'

  2. Continue the steps to deploy your single-node OpenShift cluster.

Removing a managed cluster site from the ZTP pipeline

You can remove a managed site and the associated installation and configuration policy CRs from the ZTP pipeline.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Remove a site and the associated CRs by removing the associated SiteConfig and PolicyGenTemplate files from the kustomization.yaml file.

    When you run the ZTP pipeline again, the generated CRs are removed.

  2. Optional: If you want to permanently remove a site, you should also remove the SiteConfig and site-specific PolicyGenTemplate files from the Git repository.

  3. Optional: If you want to remove a site temporarily, for example when redeploying a site, you can leave the SiteConfig and site-specific PolicyGenTemplate CRs in the Git repository.

Additional resources

Removing obsolete content from the ZTP pipeline

If a change to the PolicyGenTemplate configuration results in obsolete policies, for example, if you rename policies, use the following procedure to remove the obsolete policies.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Remove the affected PolicyGenTemplate files from the Git repository, commit and push to the remote repository.

  2. Wait for the changes to synchronize through the application and the affected policies to be removed from the hub cluster.

  3. Add the updated PolicyGenTemplate files back to the Git repository, and then commit and push to the remote repository.

    Removing zero touch provisioning (ZTP) policies from the Git repository, and as a result also removing them from the hub cluster, does not affect the configuration of the managed cluster. The policy and CRs managed by that policy remains in place on the managed cluster.

  4. Optional: As an alternative, after making changes to PolicyGenTemplate CRs that result in obsolete policies, you can remove these policies from the hub cluster manually. You can delete policies from the RHACM console using the Governance tab or by running the following command:

    $ oc delete policy -n <namespace> <policy_name>

Tearing down the ZTP pipeline

You can remove the ArgoCD pipeline and all generated ZTP artifacts.

Prerequisites

  • You have installed the OpenShift CLI (oc).

  • You have logged in to the hub cluster as a user with cluster-admin privileges.

Procedure

  1. Detach all clusters from Red Hat Advanced Cluster Management (RHACM) on the hub cluster.

  2. Delete the kustomization.yaml file in the deployment directory using the following command:

    $ oc delete -k out/argocd/deployment

  3. Commit and push your changes to the site repository.