This is a cache of https://docs.openshift.com/container-platform/4.17/backup_and_restore/control_plane_backup_and_restore/disaster_recovery/scenario-2-restoring-cluster-state.html. It is a snapshot of the page at 2024-11-23T07:48:18.060+0000.
Restoring to a previous cluster state - Control plane backup and restore | Backup and restore | OpenShift Container Platform 4.17
    OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Restoring to a previous cluster state

To restore the cluster to a previous state, you must have previously backed up etcd data by creating a snapshot. You will use this snapshot to restore the cluster state.

About restoring cluster state

You can use an etcd backup to restore your cluster to a previous state. This can be used to recover from the following situations:

  • The cluster has lost the majority of control plane hosts (quorum loss).

  • An administrator has deleted something critical and must restore to recover the cluster.

Restoring to a previous cluster state is a destructive and destablizing action to take on a running cluster. This should only be used as a last resort.

If you are able to retrieve data using the Kubernetes API server, then etcd is available and you should not restore using an etcd backup.

Restoring etcd effectively takes a cluster back in time and all clients will experience a conflicting, parallel history. This can impact the behavior of watching components like kubelets, Kubernetes controller managers, persistent volume controllers, and OpenShift operators, including the network operator.

It can cause Operator churn when the content in etcd does not match the actual content on disk, causing Operators for the Kubernetes API server, Kubernetes controller manager, Kubernetes scheduler, and etcd to get stuck when files on disk conflict with content in etcd. This can require manual actions to resolve the issues.

In extreme cases, the cluster can lose track of persistent volumes, delete critical workloads that no longer exist, reimage machines, and rewrite CA bundles with expired certificates.

Restoring to a previous cluster state

You can use a saved etcd backup to restore a previous cluster state or restore a cluster that has lost the majority of control plane hosts.

If your cluster uses a control plane machine set, see "Troubleshooting the control plane machine set" for a more simple etcd recovery procedure.

When you restore your cluster, you must use an etcd backup that was taken from the same z-stream release. For example, an OpenShift Container Platform 4.7.2 cluster must use an etcd backup that was taken from 4.7.2.
Prerequisites

  • Access to the cluster as a user with the cluster-admin role through a certificate-based kubeconfig file, like the one that was used during installation.

  • A healthy control plane host to use as the recovery host.

  • SSH access to control plane hosts.

  • A backup directory containing both the etcd snapshot and the resources for the static pods, which were from the same backup. The file names in the directory must be in the following formats: snapshot_<datetimestamp>.db and static_kuberesources_<datetimestamp>.tar.gz.

For non-recovery control plane nodes, it is not required to establish SSH connectivity or to stop the static pods. You can delete and recreate other non-recovery, control plane machines, one by one.
Procedure

  1. Select a control plane host to use as the recovery host. This is the host that you will run the restore operation on.

  2. Establish SSH connectivity to each of the control plane nodes, including the recovery host.

    kube-apiserver becomes inaccessible after the restore process starts, so you cannot access the control plane nodes. For this reason, it is recommended to establish SSH connectivity to each control plane host in a separate terminal.

    If you do not complete this step, you will not be able to access the control plane hosts to complete the restore procedure, and you will be unable to recover your cluster from this state.

  3. Copy the etcd backup directory to the recovery control plane host.

    This procedure assumes that you copied the backup directory containing the etcd snapshot and the resources for the static pods to the /home/core/ directory of your recovery control plane host.

  4. Stop the static pods on any other control plane nodes.

    You do not need to stop the static pods on the recovery host.

    1. Access a control plane host that is not the recovery host.

    2. Move the existing etcd pod file out of the kubelet manifest directory by running:

      $ sudo mv -v /etc/kubernetes/manifests/etcd-pod.yaml /tmp

    3. Verify that the etcd pods are stopped by using:

      $ sudo crictl ps | grep etcd | egrep -v "operator|etcd-guard"

      If the output of this command is not empty, wait a few minutes and check again.

    4. Move the existing kube-apiserver file out of the kubelet manifest directory by running:

      $ sudo mv -v /etc/kubernetes/manifests/kube-apiserver-pod.yaml /tmp

    5. Verify that the kube-apiserver containers are stopped by running:

      $ sudo crictl ps | grep kube-apiserver | egrep -v "operator|guard"

      If the output of this command is not empty, wait a few minutes and check again.

    6. Move the existing kube-controller-manager file out of the kubelet manifest directory by using:

      $ sudo mv -v /etc/kubernetes/manifests/kube-controller-manager-pod.yaml /tmp

    7. Verify that the kube-controller-manager containers are stopped by running:

      $ sudo crictl ps | grep kube-controller-manager | egrep -v "operator|guard"

      If the output of this command is not empty, wait a few minutes and check again.

    8. Move the existing kube-scheduler file out of the kubelet manifest directory by using:

      $ sudo mv -v /etc/kubernetes/manifests/kube-scheduler-pod.yaml /tmp

    9. Verify that the kube-scheduler containers are stopped by using:

      $ sudo crictl ps | grep kube-scheduler | egrep -v "operator|guard"

      If the output of this command is not empty, wait a few minutes and check again.

    10. Move the etcd data directory to a different location with the following example:

      $ sudo mv -v /var/lib/etcd/ /tmp

    11. If the /etc/kubernetes/manifests/keepalived.yaml file exists and the node is deleted, follow these steps:

      1. Move the /etc/kubernetes/manifests/keepalived.yaml file out of the kubelet manifest directory:

        $ sudo mv -v /etc/kubernetes/manifests/keepalived.yaml /tmp

      2. Verify that any containers managed by the keepalived daemon are stopped:

        $ sudo crictl ps --name keepalived

        The output of this command should be empty. If it is not empty, wait a few minutes and check again.

      3. Check if the control plane has any Virtual IPs (VIPs) assigned to it:

        $ ip -o address | egrep '<api_vip>|<ingress_vip>'

      4. For each reported VIP, run the following command to remove it:

        $ sudo ip address del <reported_vip> dev <reported_vip_device>

    12. Repeat this step on each of the other control plane hosts that is not the recovery host.

  5. Access the recovery control plane host.

  6. If the keepalived daemon is in use, verify that the recovery control plane node owns the VIP:

    $ ip -o address | grep <api_vip>

    The address of the VIP is highlighted in the output if it exists. This command returns an empty string if the VIP is not set or configured incorrectly.

  7. If the cluster-wide proxy is enabled, be sure that you have exported the NO_PROXY, HTTP_PROXY, and HTTPS_PROXY environment variables.

    You can check whether the proxy is enabled by reviewing the output of oc get proxy cluster -o yaml. The proxy is enabled if the httpProxy, httpsProxy, and noProxy fields have values set.

  8. Run the restore script on the recovery control plane host and pass in the path to the etcd backup directory:

    $ sudo -E /usr/local/bin/cluster-restore.sh /home/core/assets/backup
    Example script output
    ...stopping kube-scheduler-pod.yaml
...stopping kube-controller-manager-pod.yaml
...stopping etcd-pod.yaml
...stopping kube-apiserver-pod.yaml
Waiting for container etcd to stop
.complete
Waiting for container etcdctl to stop
.............................complete
Waiting for container etcd-metrics to stop
complete
Waiting for container kube-controller-manager to stop
complete
Waiting for container kube-apiserver to stop
..........................................................................................complete
Waiting for container kube-scheduler to stop
complete
Moving etcd data-dir /var/lib/etcd/member to /var/lib/etcd-backup
starting restore-etcd static pod
starting kube-apiserver-pod.yaml
static-pod-resources/kube-apiserver-pod-7/kube-apiserver-pod.yaml
starting kube-controller-manager-pod.yaml
static-pod-resources/kube-controller-manager-pod-7/kube-controller-manager-pod.yaml
starting kube-scheduler-pod.yaml
static-pod-resources/kube-scheduler-pod-8/kube-scheduler-pod.yaml

    The cluster-restore.sh script must show that etcd, kube-apiserver, kube-controller-manager, and kube-scheduler pods are stopped and then started at the end of the restore process.

    The restore process can cause nodes to enter the NotReady state if the node certificates were updated after the last etcd backup.

  9. Check the nodes to ensure they are in the Ready state.

    1. Run the following command:

      $ oc get nodes -w
      Sample output
      NAME                STATUS  ROLES          AGE     VERSION
host-172-25-75-28   Ready   master         3d20h   v1.30.3
host-172-25-75-38   Ready   infra,worker   3d20h   v1.30.3
host-172-25-75-40   Ready   master         3d20h   v1.30.3
host-172-25-75-65   Ready   master         3d20h   v1.30.3
host-172-25-75-74   Ready   infra,worker   3d20h   v1.30.3
host-172-25-75-79   Ready   worker         3d20h   v1.30.3
host-172-25-75-86   Ready   worker         3d20h   v1.30.3
host-172-25-75-98   Ready   infra,worker   3d20h   v1.30.3

      It can take several minutes for all nodes to report their state.

    2. If any nodes are in the NotReady state, log in to the nodes and remove all of the PEM files from the /var/lib/kubelet/pki directory on each node. You can SSH into the nodes or use the terminal window in the web console.

      $  ssh -i <ssh-key-path> core@<master-hostname>
      Sample pki directory
      sh-4.4# pwd
/var/lib/kubelet/pki
sh-4.4# ls
kubelet-client-2022-04-28-11-24-09.pem  kubelet-server-2022-04-28-11-24-15.pem
kubelet-client-current.pem              kubelet-server-current.pem

  10. Restart the kubelet service on all control plane hosts.

    1. From the recovery host, run:

      $ sudo systemctl restart kubelet.service

    2. Repeat this step on all other control plane hosts.

  11. Approve the pending Certificate Signing Requests (CSRs):

    Clusters with no worker nodes, such as single-node clusters or clusters consisting of three schedulable control plane nodes, will not have any pending CSRs to approve. You can skip all the commands listed in this step.

    1. Get the list of current CSRs by running:

      $ oc get csr
      Example output
      NAME        AGE    SIGNERNAME                                    REQUESTOR                                                                   CONDITION
csr-2s94x   8m3s   kubernetes.io/kubelet-serving                 system:node:<node_name>                                                     Pending (1)
csr-4bd6t   8m3s   kubernetes.io/kubelet-serving                 system:node:<node_name>                                                     Pending (1)
csr-4hl85   13m    kubernetes.io/kube-apiserver-client-kubelet   system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending (2)
csr-zhhhp   3m8s   kubernetes.io/kube-apiserver-client-kubelet   system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending (2)
...
      1 A pending kubelet serving CSR, requested by the node for the kubelet serving endpoint.
      2 A pending kubelet client CSR, requested with the node-bootstrapper node bootstrap credentials.

    2. Review the details of a CSR to verify that it is valid by running:

      $ oc describe csr <csr_name> (1)
      1 <csr_name> is the name of a CSR from the list of current CSRs.

    3. Approve each valid node-bootstrapper CSR by running:

      $ oc adm certificate approve <csr_name>

    4. For user-provisioned installations, approve each valid kubelet service CSR by running:

      $ oc adm certificate approve <csr_name>

  12. Verify that the single member control plane has started successfully.

    1. From the recovery host, verify that the etcd container is running by using:

      $ sudo crictl ps | grep etcd | egrep -v "operator|etcd-guard"
      Example output
      3ad41b7908e32       36f86e2eeaaffe662df0d21041eb22b8198e0e58abeeae8c743c3e6e977e8009                                                         About a minute ago   Running             etcd                                          0                   7c05f8af362f0

    2. From the recovery host, verify that the etcd pod is running by using:

      $ oc -n openshift-etcd get pods -l k8s-app=etcd
      Example output
      NAME                                             READY   STATUS      RESTARTS   AGE
etcd-ip-10-0-143-125.ec2.internal                1/1     Running     1          2m47s

      If the status is Pending, or the output lists more than one running etcd pod, wait a few minutes and check again.

  13. If you are using the OVNKubernetes network plugin, you must restart ovnkube-controlplane pods.

    1. Delete all of the ovnkube-controlplane pods by running:

      $ oc -n openshift-ovn-kubernetes delete pod -l app=ovnkube-control-plane

    2. Verify that all of the ovnkube-controlplane pods were redeployed by using:

      $ oc -n openshift-ovn-kubernetes get pod -l app=ovnkube-control-plane

  14. If you are using the OVN-Kubernetes network plugin, restart the Open Virtual Network (OVN) Kubernetes pods on all the nodes one by one. Use the following steps to restart OVN-Kubernetes pods on each node:

    Restart OVN-Kubernetes pods in the following order

    1. The recovery control plane host

    2. The other control plane hosts (if available)

    3. The other nodes

    Validating and mutating admission webhooks can reject pods. If you add any additional webhooks with the failurePolicy set to Fail, then they can reject pods and the restoration process can fail. You can avoid this by saving and deleting webhooks while restoring the cluster state. After the cluster state is restored successfully, you can enable the webhooks again.

    Alternatively, you can temporarily set the failurePolicy to Ignore while restoring the cluster state. After the cluster state is restored successfully, you can set the failurePolicy to Fail.

    1. Remove the northbound database (nbdb) and southbound database (sbdb). Access the recovery host and the remaining control plane nodes by using Secure Shell (SSH) and run:

      $ sudo rm -f /var/lib/ovn-ic/etc/*.db

    2. Restart the OpenVSwitch services. Access the node by using Secure Shell (SSH) and run the following command:

      $ sudo systemctl restart ovs-vswitchd ovsdb-server

    3. Delete the ovnkube-node pod on the node by running the following command, replacing <node> with the name of the node that you are restarting:

      $ oc -n openshift-ovn-kubernetes delete pod -l app=ovnkube-node --field-selector=spec.nodeName==<node>

    4. Verify that the ovnkube-node pod is running again with:

      $ oc -n openshift-ovn-kubernetes get pod -l app=ovnkube-node --field-selector=spec.nodeName==<node>

      It might take several minutes for the pods to restart.

  15. Delete and re-create other non-recovery, control plane machines, one by one. After the machines are re-created, a new revision is forced and etcd automatically scales up.

    • If you use a user-provisioned bare metal installation, you can re-create a control plane machine by using the same method that you used to originally create it. For more information, see "Installing a user-provisioned cluster on bare metal".

      Do not delete and re-create the machine for the recovery host.

    • If you are running installer-provisioned infrastructure, or you used the Machine API to create your machines, follow these steps:

      Do not delete and re-create the machine for the recovery host.

      For bare metal installations on installer-provisioned infrastructure, control plane machines are not re-created. For more information, see "Replacing a bare-metal control plane node".

      1. Obtain the machine for one of the lost control plane hosts.

        In a terminal that has access to the cluster as a cluster-admin user, run the following command:

        $ oc get machines -n openshift-machine-api -o wide

        Example output:

        NAME                                        PHASE     TYPE        REGION      ZONE         AGE     NODE                           PROVIDERID                              STATE
clustername-8qw5l-master-0                  Running   m4.xlarge   us-east-1   us-east-1a   3h37m   ip-10-0-131-183.ec2.internal   aws:///us-east-1a/i-0ec2782f8287dfb7e   stopped (1)
clustername-8qw5l-master-1                  Running   m4.xlarge   us-east-1   us-east-1b   3h37m   ip-10-0-143-125.ec2.internal   aws:///us-east-1b/i-096c349b700a19631   running
clustername-8qw5l-master-2                  Running   m4.xlarge   us-east-1   us-east-1c   3h37m   ip-10-0-154-194.ec2.internal    aws:///us-east-1c/i-02626f1dba9ed5bba  running
clustername-8qw5l-worker-us-east-1a-wbtgd   Running   m4.large    us-east-1   us-east-1a   3h28m   ip-10-0-129-226.ec2.internal   aws:///us-east-1a/i-010ef6279b4662ced   running
clustername-8qw5l-worker-us-east-1b-lrdxb   Running   m4.large    us-east-1   us-east-1b   3h28m   ip-10-0-144-248.ec2.internal   aws:///us-east-1b/i-0cb45ac45a166173b   running
clustername-8qw5l-worker-us-east-1c-pkg26   Running   m4.large    us-east-1   us-east-1c   3h28m   ip-10-0-170-181.ec2.internal   aws:///us-east-1c/i-06861c00007751b0a   running
        1 This is the control plane machine for the lost control plane host, ip-10-0-131-183.ec2.internal.

      2. Delete the machine of the lost control plane host by running:

        $ oc delete machine -n openshift-machine-api clustername-8qw5l-master-0 (1)
        1 Specify the name of the control plane machine for the lost control plane host.

        A new machine is automatically provisioned after deleting the machine of the lost control plane host.

      3. Verify that a new machine has been created by running:

        $ oc get machines -n openshift-machine-api -o wide

        Example output:

        NAME                                        PHASE          TYPE        REGION      ZONE         AGE     NODE                           PROVIDERID                              STATE
clustername-8qw5l-master-1                  Running        m4.xlarge   us-east-1   us-east-1b   3h37m   ip-10-0-143-125.ec2.internal   aws:///us-east-1b/i-096c349b700a19631   running
clustername-8qw5l-master-2                  Running        m4.xlarge   us-east-1   us-east-1c   3h37m   ip-10-0-154-194.ec2.internal    aws:///us-east-1c/i-02626f1dba9ed5bba  running
clustername-8qw5l-master-3                  Provisioning   m4.xlarge   us-east-1   us-east-1a   85s     ip-10-0-173-171.ec2.internal    aws:///us-east-1a/i-015b0888fe17bc2c8  running (1)
clustername-8qw5l-worker-us-east-1a-wbtgd   Running        m4.large    us-east-1   us-east-1a   3h28m   ip-10-0-129-226.ec2.internal   aws:///us-east-1a/i-010ef6279b4662ced   running
clustername-8qw5l-worker-us-east-1b-lrdxb   Running        m4.large    us-east-1   us-east-1b   3h28m   ip-10-0-144-248.ec2.internal   aws:///us-east-1b/i-0cb45ac45a166173b   running
clustername-8qw5l-worker-us-east-1c-pkg26   Running        m4.large    us-east-1   us-east-1c   3h28m   ip-10-0-170-181.ec2.internal   aws:///us-east-1c/i-06861c00007751b0a   running
        1 The new machine, clustername-8qw5l-master-3 is being created and is ready after the phase changes from Provisioning to Running.

        It might take a few minutes for the new machine to be created. The etcd cluster Operator will automatically sync when the machine or node returns to a healthy state.

      4. Repeat these steps for each lost control plane host that is not the recovery host.

  16. Turn off the quorum guard by entering:

    $ oc patch etcd/cluster --type=merge -p '{"spec": {"unsupportedConfigOverrides": {"useUnsupportedUnsafeNonHANonProductionUnstableetcd": true}}}'

    This command ensures that you can successfully re-create secrets and roll out the static pods.

  17. In a separate terminal window within the recovery host, export the recovery kubeconfig file by running:

    $ export KUBECONFIG=/etc/kubernetes/static-pod-resources/kube-apiserver-certs/secrets/node-kubeconfigs/localhost-recovery.kubeconfig

  18. Force etcd redeployment.

    In the same terminal window where you exported the recovery kubeconfig file, run:

    $ oc patch etcd cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge (1)
    1 The forceRedeploymentReason value must be unique, which is why a timestamp is appended.

    The etcd redeployment starts.

    When the etcd cluster Operator performs a redeployment, the existing nodes are started with new pods similar to the initial bootstrap scale up.

  19. Turn the quorum guard back on by entering:

    $ oc patch etcd/cluster --type=merge -p '{"spec": {"unsupportedConfigOverrides": null}}'

  20. You can verify that the unsupportedConfigOverrides section is removed from the object by running:

    $ oc get etcd/cluster -oyaml

  21. Verify all nodes are updated to the latest revision.

    In a terminal that has access to the cluster as a cluster-admin user, run:

    $ oc get etcd -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

    Review the NodeInstallerProgressing status condition for etcd to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

    AllNodesAtLatestRevision
3 nodes are at revision 7 (1)
    1 In this example, the latest revision number is 7.

    If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

  22. After etcd is redeployed, force new rollouts for the control plane. kube-apiserver will reinstall itself on the other nodes because the kubelet is connected to API servers using an internal load balancer.

    In a terminal that has access to the cluster as a cluster-admin user, run:

    1. Force a new rollout for kube-apiserver:

      $ oc patch kubeapiserver cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

      Verify all nodes are updated to the latest revision.

      $ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

      Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

      AllNodesAtLatestRevision
3 nodes are at revision 7 (1)
      1 In this example, the latest revision number is 7.

      If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

    2. Force a new rollout for the Kubernetes controller manager by running the following command:

      $ oc patch kubecontrollermanager cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

      Verify all nodes are updated to the latest revision by running:

      $ oc get kubecontrollermanager -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

      Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

      AllNodesAtLatestRevision
3 nodes are at revision 7 (1)
      1 In this example, the latest revision number is 7.

      If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

    3. Force a new rollout for the kube-scheduler by running:

      $ oc patch kubescheduler cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge

      Verify all nodes are updated to the latest revision by using:

      $ oc get kubescheduler -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'

      Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:

      AllNodesAtLatestRevision
3 nodes are at revision 7 (1)
      1 In this example, the latest revision number is 7.

      If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

  23. Monitor the platform Operators by running:

    $ oc adm wait-for-stable-cluster

    This process can take up to 15 minutes.

  24. Verify that all control plane hosts have started and joined the cluster.

    In a terminal that has access to the cluster as a cluster-admin user, run the following command:

    $ oc -n openshift-etcd get pods -l k8s-app=etcd
    Example output
    etcd-ip-10-0-143-125.ec2.internal                2/2     Running     0          9h
etcd-ip-10-0-154-194.ec2.internal                2/2     Running     0          9h
etcd-ip-10-0-173-171.ec2.internal                2/2     Running     0          9h

To ensure that all workloads return to normal operation following a recovery procedure, restart all control plane nodes.

On completion of the previous procedural steps, you might need to wait a few minutes for all services to return to their restored state. For example, authentication by using oc login might not immediately work until the OAuth server pods are restarted.

Consider using the system:admin kubeconfig file for immediate authentication. This method basis its authentication on SSL/TLS client certificates as against OAuth tokens. You can authenticate with this file by issuing the following command:

$ export KUBECONFIG=<installation_directory>/auth/kubeconfig

Issue the following command to display your authenticated user name:

$ oc whoami

Additional resources

Issues and workarounds for restoring a persistent storage state

If your OpenShift Container Platform cluster uses persistent storage of any form, a state of the cluster is typically stored outside etcd. It might be an Elasticsearch cluster running in a pod or a database running in a StatefulSet object. When you restore from an etcd backup, the status of the workloads in OpenShift Container Platform is also restored. However, if the etcd snapshot is old, the status might be invalid or outdated.

The contents of persistent volumes (PVs) are never part of the etcd snapshot. When you restore an OpenShift Container Platform cluster from an etcd snapshot, non-critical workloads might gain access to critical data, or vice-versa.

The following are some example scenarios that produce an out-of-date status:

  • MySQL database is running in a pod backed up by a PV object. Restoring OpenShift Container Platform from an etcd snapshot does not bring back the volume on the storage provider, and does not produce a running MySQL pod, despite the pod repeatedly attempting to start. You must manually restore this pod by restoring the volume on the storage provider, and then editing the PV to point to the new volume.

  • Pod P1 is using volume A, which is attached to node X. If the etcd snapshot is taken while another pod uses the same volume on node Y, then when the etcd restore is performed, pod P1 might not be able to start correctly due to the volume still being attached to node Y. OpenShift Container Platform is not aware of the attachment, and does not automatically detach it. When this occurs, the volume must be manually detached from node Y so that the volume can attach on node X, and then pod P1 can start.

  • Cloud provider or storage provider credentials were updated after the etcd snapshot was taken. This causes any CSI drivers or Operators that depend on the those credentials to not work. You might have to manually update the credentials required by those drivers or Operators.

  • A device is removed or renamed from OpenShift Container Platform nodes after the etcd snapshot is taken. The Local Storage Operator creates symlinks for each PV that it manages from /dev/disk/by-id or /dev directories. This situation might cause the local PVs to refer to devices that no longer exist.

    To fix this problem, an administrator must:

    1. Manually remove the PVs with invalid devices.

    2. Remove symlinks from respective nodes.

    3. Delete LocalVolume or LocalVolumeSet objects (see Storage → Configuring persistent storage → Persistent storage using local volumes → Deleting the Local Storage Operator Resources).