This is a cache of https://docs.openshift.com/container-platform/4.17/nodes/clusters/nodes-cluster-overcommit.html. It is a snapshot of the page at 2024-11-28T07:27:56.615+0000.
Configuring your cluster to place pods on overcommited nodes - Working with clusters | Nodes | OpenShift Container Platform 4.17
    OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Configuring your cluster to place pods on overcommitted nodes

In an overcommitted state, the sum of the container compute resource requests and limits exceeds the resources available on the system. For example, you might want to use overcommitment in development environments where a trade-off of guaranteed performance for capacity is acceptable.

Containers can specify compute resource requests and limits. Requests are used for scheduling your container and provide a minimum service guarantee. Limits constrain the amount of compute resource that can be consumed on your node.

The scheduler attempts to optimize the compute resource use across all nodes in your cluster. It places pods onto specific nodes, taking the pods' compute resource requests and nodes' available capacity into consideration.

OpenShift Container Platform administrators can control the level of overcommit and manage container density on nodes. You can configure cluster-level overcommit using the ClusterResourceOverride Operator to override the ratio between requests and limits set on developer containers. In conjunction with node overcommit, you can adjust the resource limit and request to achieve the desired level of overcommit.

In OpenShift Container Platform, you must enable cluster-level overcommit. Node overcommitment is enabled by default. See Disabling overcommitment for a node.

Resource requests and overcommitment

For each compute resource, a container may specify a resource request and limit. Scheduling decisions are made based on the request to ensure that a node has enough capacity available to meet the requested value. If a container specifies limits, but omits requests, the requests are defaulted to the limits. A container is not able to exceed the specified limit on the node.

The enforcement of limits is dependent upon the compute resource type. If a container makes no request or limit, the container is scheduled to a node with no resource guarantees. In practice, the container is able to consume as much of the specified resource as is available with the lowest local priority. In low resource situations, containers that specify no resource requests are given the lowest quality of service.

Scheduling is based on resources requested, while quota and hard limits refer to resource limits, which can be set higher than requested resources. The difference between request and limit determines the level of overcommit; for instance, if a container is given a memory request of 1Gi and a memory limit of 2Gi, it is scheduled based on the 1Gi request being available on the node, but could use up to 2Gi; so it is 200% overcommitted.

Cluster-level overcommit using the Cluster Resource Override Operator

The Cluster Resource Override Operator is an admission webhook that allows you to control the level of overcommit and manage container density across all the nodes in your cluster. The Operator controls how nodes in specific projects can exceed defined memory and CPU limits.

You must install the Cluster Resource Override Operator using the OpenShift Container Platform console or CLI as shown in the following sections. During the installation, you create a ClusterResourceOverride custom resource (CR), where you set the level of overcommit, as shown in the following example:

apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
    name: cluster (1)
spec:
  podResourceOverride:
    spec:
      memoryRequestToLimitPercent: 50 (2)
      cpuRequestToLimitPercent: 25 (3)
      limitCPUToMemoryPercent: 200 (4)
# ...
1 The name must be cluster.
2 Optional. If a container memory limit has been specified or defaulted, the memory request is overridden to this percentage of the limit, between 1-100. The default is 50.
3 Optional. If a container CPU limit has been specified or defaulted, the CPU request is overridden to this percentage of the limit, between 1-100. The default is 25.
4 Optional. If a container memory limit has been specified or defaulted, the CPU limit is overridden to a percentage of the memory limit, if specified. Scaling 1Gi of RAM at 100 percent is equal to 1 CPU core. This is processed prior to overriding the CPU request (if configured). The default is 200.

The Cluster Resource Override Operator overrides have no effect if limits have not been set on containers. Create a LimitRange object with default limits per individual project or configure limits in Pod specs for the overrides to apply.

When configured, overrides can be enabled per-project by applying the following label to the Namespace object for each project:

apiVersion: v1
kind: Namespace
metadata:

# ...

  labels:
    clusterresourceoverrides.admission.autoscaling.openshift.io/enabled: "true"

# ...

The Operator watches for the ClusterResourceOverride CR and ensures that the ClusterResourceOverride admission webhook is installed into the same namespace as the operator.

Installing the Cluster Resource Override Operator using the web console

You can use the OpenShift Container Platform CLI to install the Cluster Resource Override Operator to help control overcommit in your cluster.

By default, the installation process creates a Cluster Resource Override Operator pod on a worker node in the clusterresourceoverride-operator namespace. You can move this pod to another node, such as an infrastructure node, as needed. Infrastructure nodes are not counted toward the total number of subscriptions that are required to run the environment. For more information, see "Moving the Cluster Resource Override Operator pods".

Prerequisites

  • The Cluster Resource Override Operator has no effect if limits have not been set on containers. You must specify default limits for a project using a LimitRange object or configure limits in Pod specs for the overrides to apply.

Procedure

To install the Cluster Resource Override Operator using the OpenShift Container Platform web console:

  1. In the OpenShift Container Platform web console, navigate to Home → Projects

    1. Click Create Project.

    2. Specify clusterresourceoverride-operator as the name of the project.

    3. Click Create.

  2. Navigate to Operators → OperatorHub.

    1. Choose ClusterResourceOverride Operator from the list of available Operators and click Install.

    2. On the Install Operator page, make sure A specific Namespace on the cluster is selected for Installation Mode.

    3. Make sure clusterresourceoverride-operator is selected for Installed Namespace.

    4. Select an Update Channel and Approval Strategy.

    5. Click Install.

  3. On the Installed Operators page, click ClusterResourceOverride.

    1. On the ClusterResourceOverride Operator details page, click Create ClusterResourceOverride.

    2. On the Create ClusterResourceOverride page, click YAML view and edit the YAML template to set the overcommit values as needed:

      apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
  name: cluster (1)
spec:
  podResourceOverride:
    spec:
      memoryRequestToLimitPercent: 50 (2)
      cpuRequestToLimitPercent: 25 (3)
      limitCPUToMemoryPercent: 200 (4)
      1 The name must be cluster.
      2 Optional: Specify the percentage to override the container memory limit, if used, between 1-100. The default is 50.
      3 Optional: Specify the percentage to override the container CPU limit, if used, between 1-100. The default is 25.
      4 Optional: Specify the percentage to override the container memory limit, if used. Scaling 1 Gi of RAM at 100 percent is equal to 1 CPU core. This is processed before overriding the CPU request, if configured. The default is 200.

    3. Click Create.

  4. Check the current state of the admission webhook by checking the status of the cluster custom resource:

    1. On the ClusterResourceOverride Operator page, click cluster.

    2. On the ClusterResourceOverride Details page, click YAML. The mutatingWebhookConfigurationRef section appears when the webhook is called.

      apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
  annotations:
    kubectl.kubernetes.io/last-applied-configuration: |
      {"apiVersion":"operator.autoscaling.openshift.io/v1","kind":"ClusterResourceOverride","metadata":{"annotations":{},"name":"cluster"},"spec":{"podResourceOverride":{"spec":{"cpuRequestToLimitPercent":25,"limitCPUToMemoryPercent":200,"memoryRequestToLimitPercent":50}}}}
  creationTimestamp: "2019-12-18T22:35:02Z"
  generation: 1
  name: cluster
  resourceVersion: "127622"
  selfLink: /apis/operator.autoscaling.openshift.io/v1/clusterresourceoverrides/cluster
  uid: 978fc959-1717-4bd1-97d0-ae00ee111e8d
spec:
  podResourceOverride:
    spec:
      cpuRequestToLimitPercent: 25
      limitCPUToMemoryPercent: 200
      memoryRequestToLimitPercent: 50
status:

# ...

    mutatingWebhookConfigurationRef: (1)
      apiVersion: admissionregistration.k8s.io/v1
      kind: MutatingWebhookConfiguration
      name: clusterresourceoverrides.admission.autoscaling.openshift.io
      resourceVersion: "127621"
      uid: 98b3b8ae-d5ce-462b-8ab5-a729ea8f38f3

# ...
      1 Reference to the ClusterResourceOverride admission webhook.
Additional resources

Installing the Cluster Resource Override Operator using the CLI

You can use the OpenShift Container Platform CLI to install the Cluster Resource Override Operator to help control overcommit in your cluster.

By default, the installation process creates a Cluster Resource Override Operator pod on a worker node in the clusterresourceoverride-operator namespace. You can move this pod to another node, such as an infrastructure node, as needed. Infrastructure nodes are not counted toward the total number of subscriptions that are required to run the environment. For more information, see "Moving the Cluster Resource Override Operator pods".

Prerequisites

  • The Cluster Resource Override Operator has no effect if limits have not been set on containers. You must specify default limits for a project using a LimitRange object or configure limits in Pod specs for the overrides to apply.

Procedure

To install the Cluster Resource Override Operator using the CLI:

  1. Create a namespace for the Cluster Resource Override Operator:

    1. Create a Namespace object YAML file (for example, cro-namespace.yaml) for the Cluster Resource Override Operator:

      apiVersion: v1
kind: Namespace
metadata:
  name: clusterresourceoverride-operator

    2. Create the namespace:

      $ oc create -f <file-name>.yaml

      For example:

      $ oc create -f cro-namespace.yaml

  2. Create an Operator group:

    1. Create an OperatorGroup object YAML file (for example, cro-og.yaml) for the Cluster Resource Override Operator:

      apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: clusterresourceoverride-operator
  namespace: clusterresourceoverride-operator
spec:
  targetNamespaces:
    - clusterresourceoverride-operator

    2. Create the Operator Group:

      $ oc create -f <file-name>.yaml

      For example:

      $ oc create -f cro-og.yaml

  3. Create a subscription:

    1. Create a Subscription object YAML file (for example, cro-sub.yaml) for the Cluster Resource Override Operator:

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: clusterresourceoverride
  namespace: clusterresourceoverride-operator
spec:
  channel: "4.17"
  name: clusterresourceoverride
  source: redhat-operators
  sourceNamespace: openshift-marketplace

    2. Create the subscription:

      $ oc create -f <file-name>.yaml

      For example:

      $ oc create -f cro-sub.yaml

  4. Create a ClusterResourceOverride custom resource (CR) object in the clusterresourceoverride-operator namespace:

    1. Change to the clusterresourceoverride-operator namespace.

      $ oc project clusterresourceoverride-operator

    2. Create a ClusterResourceOverride object YAML file (for example, cro-cr.yaml) for the Cluster Resource Override Operator:

      apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
    name: cluster (1)
spec:
  podResourceOverride:
    spec:
      memoryRequestToLimitPercent: 50 (2)
      cpuRequestToLimitPercent: 25 (3)
      limitCPUToMemoryPercent: 200 (4)
      1 The name must be cluster.
      2 Optional: Specify the percentage to override the container memory limit, if used, between 1-100. The default is 50.
      3 Optional: Specify the percentage to override the container CPU limit, if used, between 1-100. The default is 25.
      4 Optional: Specify the percentage to override the container memory limit, if used. Scaling 1 Gi of RAM at 100 percent is equal to 1 CPU core. This is processed before overriding the CPU request, if configured. The default is 200.

    3. Create the ClusterResourceOverride object:

      $ oc create -f <file-name>.yaml

      For example:

      $ oc create -f cro-cr.yaml

  5. Verify the current state of the admission webhook by checking the status of the cluster custom resource.

    $ oc get clusterresourceoverride cluster -n clusterresourceoverride-operator -o yaml

    The mutatingWebhookConfigurationRef section appears when the webhook is called.

    Example output
    apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
  annotations:
    kubectl.kubernetes.io/last-applied-configuration: |
      {"apiVersion":"operator.autoscaling.openshift.io/v1","kind":"ClusterResourceOverride","metadata":{"annotations":{},"name":"cluster"},"spec":{"podResourceOverride":{"spec":{"cpuRequestToLimitPercent":25,"limitCPUToMemoryPercent":200,"memoryRequestToLimitPercent":50}}}}
  creationTimestamp: "2019-12-18T22:35:02Z"
  generation: 1
  name: cluster
  resourceVersion: "127622"
  selfLink: /apis/operator.autoscaling.openshift.io/v1/clusterresourceoverrides/cluster
  uid: 978fc959-1717-4bd1-97d0-ae00ee111e8d
spec:
  podResourceOverride:
    spec:
      cpuRequestToLimitPercent: 25
      limitCPUToMemoryPercent: 200
      memoryRequestToLimitPercent: 50
status:

# ...

    mutatingWebhookConfigurationRef: (1)
      apiVersion: admissionregistration.k8s.io/v1
      kind: MutatingWebhookConfiguration
      name: clusterresourceoverrides.admission.autoscaling.openshift.io
      resourceVersion: "127621"
      uid: 98b3b8ae-d5ce-462b-8ab5-a729ea8f38f3

# ...
    1 Reference to the ClusterResourceOverride admission webhook.
Additional resources

Configuring cluster-level overcommit

The Cluster Resource Override Operator requires a ClusterResourceOverride custom resource (CR) and a label for each project where you want the Operator to control overcommit.

By default, the installation process creates two Cluster Resource Override pods on the control plane nodes in the clusterresourceoverride-operator namespace. You can move these pods to other nodes, such as infrastructure nodes, as needed. Infrastructure nodes are not counted toward the total number of subscriptions that are required to run the environment. For more information, see "Moving the Cluster Resource Override Operator pods".

Prerequisites

  • The Cluster Resource Override Operator has no effect if limits have not been set on containers. You must specify default limits for a project using a LimitRange object or configure limits in Pod specs for the overrides to apply.

Procedure

To modify cluster-level overcommit:

  1. Edit the ClusterResourceOverride CR:

    apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
    name: cluster
spec:
  podResourceOverride:
    spec:
      memoryRequestToLimitPercent: 50 (1)
      cpuRequestToLimitPercent: 25 (2)
      limitCPUToMemoryPercent: 200 (3)
# ...
    1 Optional: Specify the percentage to override the container memory limit, if used, between 1-100. The default is 50.
    2 Optional: Specify the percentage to override the container CPU limit, if used, between 1-100. The default is 25.
    3 Optional: Specify the percentage to override the container memory limit, if used. Scaling 1Gi of RAM at 100 percent is equal to 1 CPU core. This is processed before overriding the CPU request, if configured. The default is 200.

  2. Ensure the following label has been added to the Namespace object for each project where you want the Cluster Resource Override Operator to control overcommit:

    apiVersion: v1
kind: Namespace
metadata:

# ...

  labels:
    clusterresourceoverrides.admission.autoscaling.openshift.io/enabled: "true" (1)

# ...
    1 Add this label to each project.
Additional resources

Moving the Cluster Resource Override Operator pods

By default, the Cluster Resource Override Operator installation process creates an Operator pod and two Cluster Resource Override pods on nodes in the clusterresourceoverride-operator namespace. You can move these pods to other nodes, such as infrastructure nodes, as needed.

You can create and use infrastructure nodes to host only infrastructure components, such as the default router, the integrated container image registry, and the components for cluster metrics and monitoring. These infrastructure nodes are not counted toward the total number of subscriptions that are required to run the environment. For more information about infrastructure nodes, see "Creating infrastructure machine sets".

The following examples shows the Cluster Resource Override pods are deployed to control plane nodes and the Cluster Resource Override Operator pod is deployed to a worker node.

Example Cluster Resource Override pods
NAME                                                READY   STATUS    RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
clusterresourceoverride-786b8c898c-9wrdq            1/1     Running   0          23s   10.128.2.32   ip-10-0-14-183.us-west-2.compute.internal   <none>           <none>
clusterresourceoverride-786b8c898c-vn2lf            1/1     Running   0          26s   10.130.2.10   ip-10-0-20-140.us-west-2.compute.internal   <none>           <none>
clusterresourceoverride-operator-6b8b8b656b-lvr62   1/1     Running   0          56m   10.131.0.33   ip-10-0-2-39.us-west-2.compute.internal     <none>           <none>
Example node list
NAME                                        STATUS   ROLES                  AGE   VERSION
ip-10-0-14-183.us-west-2.compute.internal   Ready    control-plane,master   65m   v1.30.4
ip-10-0-2-39.us-west-2.compute.internal     Ready    worker                 58m   v1.30.4
ip-10-0-20-140.us-west-2.compute.internal   Ready    control-plane,master   65m   v1.30.4
ip-10-0-23-244.us-west-2.compute.internal   Ready    infra                  55m   v1.30.4
ip-10-0-77-153.us-west-2.compute.internal   Ready    control-plane,master   65m   v1.30.4
ip-10-0-99-108.us-west-2.compute.internal   Ready    worker                 24m   v1.30.4
ip-10-0-24-233.us-west-2.compute.internal   Ready    infra                  55m   v1.30.4
ip-10-0-88-109.us-west-2.compute.internal   Ready    worker                 24m   v1.30.4
ip-10-0-67-453.us-west-2.compute.internal   Ready    infra                  55m   v1.30.4
Procedure

  1. Move the Cluster Resource Override Operator pod by adding a node selector to the Subscription custom resource (CR) for the Cluster Resource Override Operator.

    1. Edit the CR:

      $ oc edit -n clusterresourceoverride-operator subscriptions.operators.coreos.com clusterresourceoverride

    2. Add a node selector to match the node role label on the node where you want to install the Cluster Resource Override Operator pod:

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: clusterresourceoverride
  namespace: clusterresourceoverride-operator
# ...
spec:
  config:
    nodeSelector:
      node-role.kubernetes.io/infra: "" (1)
# ...
      1 Specify the role of the node where you want to deploy the Cluster Resource Override Operator pod.

      If the infra node uses taints, you need to add a toleration to the Subscription CR.

      For example:

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: clusterresourceoverride
  namespace: clusterresourceoverride-operator
# ...
spec:
  config:
    nodeSelector:
      node-role.kubernetes.io/infra: ""
    tolerations: (1)
    - key: "node-role.kubernetes.io/infra"
      operator: "Exists"
      effect: "NoSchedule"
      1 Specifies a toleration for a taint on the infra node.

  2. Move the Cluster Resource Override pods by adding a node selector to the ClusterResourceOverride custom resource (CR):

    1. Edit the CR:

      $ oc edit ClusterResourceOverride cluster -n clusterresourceoverride-operator

    2. Add a node selector to match the node role label on the infra node:

      apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
  name: cluster
  resourceVersion: "37952"
spec:
  podResourceOverride:
    spec:
      cpuRequestToLimitPercent: 25
      limitCPUToMemoryPercent: 200
      memoryRequestToLimitPercent: 50
  deploymentOverrides:
    replicas: 1 (1)
    nodeSelector:
      node-role.kubernetes.io/infra: "" (2)
# ...
      1 Optional: Specify the number of Cluster Resource Override pods to deploy. The default is 2. Only one pod is allowed per node.
      2 Optional: Specify the role of the node where you want to deploy the Cluster Resource Override pods.

      If the infra node uses taints, you need to add a toleration to the ClusterResourceOverride CR.

      For example:

      apiVersion: operator.autoscaling.openshift.io/v1
kind: ClusterResourceOverride
metadata:
  name: cluster
# ...
spec:
  podResourceOverride:
    spec:
      memoryRequestToLimitPercent: 50
      cpuRequestToLimitPercent: 25
      limitCPUToMemoryPercent: 200
  deploymentOverrides:
    replicas: 3
    nodeSelector:
      node-role.kubernetes.io/worker: ""
    tolerations: (1)
    - key: "key"
      operator: "Equal"
      value: "value"
      effect: "NoSchedule"
      1 Specifies a toleration for a taint on the infra node.
Verification

  • You can verify that the pods have moved by using the following command:

    $ oc get pods -n clusterresourceoverride-operator -o wide

    The Cluster Resource Override pods are now deployed to the infra nodes.

    Example output
    NAME                                                READY   STATUS    RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
clusterresourceoverride-786b8c898c-9wrdq            1/1     Running   0          23s   10.127.2.25   ip-10-0-23-244.us-west-2.compute.internal   <none>           <none>
clusterresourceoverride-786b8c898c-vn2lf            1/1     Running   0          26s   10.128.0.80   ip-10-0-24-233.us-west-2.compute.internal   <none>           <none>
clusterresourceoverride-operator-6b8b8b656b-lvr62   1/1     Running   0          56m   10.129.0.71   ip-10-0-67-453.us-west-2.compute.internal   <none>           <none>
Additional resources

Node-level overcommit

You can use various ways to control overcommit on specific nodes, such as quality of service (QOS) guarantees, CPU limits, or reserve resources. You can also disable overcommit for specific nodes and specific projects.

Understanding compute resources and containers

The node-enforced behavior for compute resources is specific to the resource type.

Understanding container CPU requests

A container is guaranteed the amount of CPU it requests and is additionally able to consume excess CPU available on the node, up to any limit specified by the container. If multiple containers are attempting to use excess CPU, CPU time is distributed based on the amount of CPU requested by each container.

For example, if one container requested 500m of CPU time and another container requested 250m of CPU time, then any extra CPU time available on the node is distributed among the containers in a 2:1 ratio. If a container specified a limit, it will be throttled not to use more CPU than the specified limit. CPU requests are enforced using the CFS shares support in the Linux kernel. By default, CPU limits are enforced using the CFS quota support in the Linux kernel over a 100ms measuring interval, though this can be disabled.

Understanding container memory requests

A container is guaranteed the amount of memory it requests. A container can use more memory than requested, but once it exceeds its requested amount, it could be terminated in a low memory situation on the node. If a container uses less memory than requested, it will not be terminated unless system tasks or daemons need more memory than was accounted for in the node’s resource reservation. If a container specifies a limit on memory, it is immediately terminated if it exceeds the limit amount.

Understanding overcomitment and quality of service classes

A node is overcommitted when it has a pod scheduled that makes no request, or when the sum of limits across all pods on that node exceeds available machine capacity.

In an overcommitted environment, it is possible that the pods on the node will attempt to use more compute resource than is available at any given point in time. When this occurs, the node must give priority to one pod over another. The facility used to make this decision is referred to as a Quality of Service (QoS) Class.

A pod is designated as one of three QoS classes with decreasing order of priority:

Table 1. Quality of Service Classes
Priority Class Name Description

1 (highest)

Guaranteed

If limits and optionally requests are set (not equal to 0) for all resources and they are equal, then the pod is classified as Guaranteed.

2

Burstable

If requests and optionally limits are set (not equal to 0) for all resources, and they are not equal, then the pod is classified as Burstable.

3 (lowest)

BestEffort

If requests and limits are not set for any of the resources, then the pod is classified as BestEffort.

Memory is an incompressible resource, so in low memory situations, containers that have the lowest priority are terminated first:

  • Guaranteed containers are considered top priority, and are guaranteed to only be terminated if they exceed their limits, or if the system is under memory pressure and there are no lower priority containers that can be evicted.

  • Burstable containers under system memory pressure are more likely to be terminated once they exceed their requests and no other BestEffort containers exist.

  • BestEffort containers are treated with the lowest priority. Processes in these containers are first to be terminated if the system runs out of memory.

Understanding how to reserve memory across quality of service tiers

You can use the qos-reserved parameter to specify a percentage of memory to be reserved by a pod in a particular QoS level. This feature attempts to reserve requested resources to exclude pods from lower OoS classes from using resources requested by pods in higher QoS classes.

OpenShift Container Platform uses the qos-reserved parameter as follows:

  • A value of qos-reserved=memory=100% will prevent the Burstable and BestEffort QoS classes from consuming memory that was requested by a higher QoS class. This increases the risk of inducing OOM on BestEffort and Burstable workloads in favor of increasing memory resource guarantees for Guaranteed and Burstable workloads.

  • A value of qos-reserved=memory=50% will allow the Burstable and BestEffort QoS classes to consume half of the memory requested by a higher QoS class.

  • A value of qos-reserved=memory=0% will allow a Burstable and BestEffort QoS classes to consume up to the full node allocatable amount if available, but increases the risk that a Guaranteed workload will not have access to requested memory. This condition effectively disables this feature.

Understanding swap memory and QOS

You can disable swap by default on your nodes to preserve quality of service (QOS) guarantees. Otherwise, physical resources on a node can oversubscribe, affecting the resource guarantees the Kubernetes scheduler makes during pod placement.

For example, if two guaranteed pods have reached their memory limit, each container could start using swap memory. Eventually, if there is not enough swap space, processes in the pods can be terminated due to the system being oversubscribed.

Failing to disable swap results in nodes not recognizing that they are experiencing MemoryPressure, resulting in pods not receiving the memory they made in their scheduling request. As a result, additional pods are placed on the node to further increase memory pressure, ultimately increasing your risk of experiencing a system out of memory (OOM) event.

If swap is enabled, any out-of-resource handling eviction thresholds for available memory will not work as expected. Take advantage of out-of-resource handling to allow pods to be evicted from a node when it is under memory pressure, and rescheduled on an alternative node that has no such pressure.

Understanding nodes overcommitment

In an overcommitted environment, it is important to properly configure your node to provide best system behavior.

When the node starts, it ensures that the kernel tunable flags for memory management are set properly. The kernel should never fail memory allocations unless it runs out of physical memory.

To ensure this behavior, OpenShift Container Platform configures the kernel to always overcommit memory by setting the vm.overcommit_memory parameter to 1, overriding the default operating system setting.

OpenShift Container Platform also configures the kernel not to panic when it runs out of memory by setting the vm.panic_on_oom parameter to 0. A setting of 0 instructs the kernel to call oom_killer in an Out of Memory (OOM) condition, which kills processes based on priority.

You can view the current setting by running the following commands on your nodes:

$ sysctl -a |grep commit
Example output
#...
vm.overcommit_memory = 0
#...
$ sysctl -a |grep panic
Example output
#...
vm.panic_on_oom = 0
#...

The above flags should already be set on nodes, and no further action is required.

You can also perform the following configurations for each node:

  • Disable or enforce CPU limits using CPU CFS quotas

  • Reserve resources for system processes

  • Reserve memory across quality of service tiers

Disabling or enforcing CPU limits using CPU CFS quotas

Nodes by default enforce specified CPU limits using the Completely Fair Scheduler (CFS) quota support in the Linux kernel.

If you disable CPU limit enforcement, it is important to understand the impact on your node:

  • If a container has a CPU request, the request continues to be enforced by CFS shares in the Linux kernel.

  • If a container does not have a CPU request, but does have a CPU limit, the CPU request defaults to the specified CPU limit, and is enforced by CFS shares in the Linux kernel.

  • If a container has both a CPU request and limit, the CPU request is enforced by CFS shares in the Linux kernel, and the CPU limit has no impact on the node.

Prerequisites

  • Obtain the label associated with the static MachineConfigPool CRD for the type of node you want to configure by entering the following command:

    $ oc edit machineconfigpool <name>

    For example:

    $ oc edit machineconfigpool worker
    Example output
    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfigPool
metadata:
  creationTimestamp: "2022-11-16T15:34:25Z"
  generation: 4
  labels:
    pools.operator.machineconfiguration.openshift.io/worker: "" (1)
  name: worker
    1 The label appears under Labels.

    If the label is not present, add a key/value pair such as:

    $ oc label machineconfigpool worker custom-kubelet=small-pods
Procedure

  1. Create a custom resource (CR) for your configuration change.

    Sample configuration for a disabling CPU limits
    apiVersion: machineconfiguration.openshift.io/v1
kind: KubeletConfig
metadata:
  name: disable-cpu-units (1)
spec:
  machineConfigPoolSelector:
    matchLabels:
      pools.operator.machineconfiguration.openshift.io/worker: "" (2)
  kubeletConfig:
    cpuCfsQuota: false (3)
    1 Assign a name to CR.
    2 Specify the label from the machine config pool.
    3 Set the cpuCfsQuota parameter to false.

  2. Run the following command to create the CR:

    $ oc create -f <file_name>.yaml

Reserving resources for system processes

To provide more reliable scheduling and minimize node resource overcommitment, each node can reserve a portion of its resources for use by system daemons that are required to run on your node for your cluster to function. In particular, it is recommended that you reserve resources for incompressible resources such as memory.

Procedure

To explicitly reserve resources for non-pod processes, allocate node resources by specifying resources available for scheduling. For more details, see Allocating Resources for Nodes.

Disabling overcommitment for a node

When enabled, overcommitment can be disabled on each node.

Procedure

To disable overcommitment in a node run the following command on that node:

$ sysctl -w vm.overcommit_memory=0

Project-level limits

To help control overcommit, you can set per-project resource limit ranges, specifying memory and CPU limits and defaults for a project that overcommit cannot exceed.

For information on project-level resource limits, see Additional resources.

Alternatively, you can disable overcommitment for specific projects.

Disabling overcommitment for a project

When enabled, overcommitment can be disabled per-project. For example, you can allow infrastructure components to be configured independently of overcommitment.

Procedure

  1. Create or edit the namespace object file.

  2. Add the following annotation:

    apiVersion: v1
kind: Namespace
metadata:
  annotations:
    quota.openshift.io/cluster-resource-override-enabled: "false" (1)
# ...
    1 Setting this annotation to false disables overcommit for this namespace.

Additional resources