Persistent storage using local volumes - Configuring persistent storage | Storage

Installing the Local Storage Operator
Provision the local volumes
Create the local volume PersistentVolumeClaim
Attach the local claim
Deleting the Local Storage Operator’s resources
- Removing a local volume
- Uninstalling the Local Storage Operator

OpenShift Container Platform can be provisioned with persistent storage by using local volumes. Local persistent volumes allow you to access local storage devices, such as a disk or partition, by using the standard PVC interface.

Local volumes can be used without manually scheduling Pods to nodes, because the system is aware of the volume node’s constraints. However, local volumes are still subject to the availability of the underlying node and are not suitable for all applications.

Local volumes can only be used as a statically created Persistent Volume.

Installing the Local Storage Operator

The Local Storage Operator is not installed in OpenShift Container Platform by default. Use the following procedure to install and configure this Operator to enable local volumes in your cluster.

Prerequisites

Access to the OpenShift Container Platform web console or command-line interface (CLI).

Procedure

Create the local-storage project:
```
$ oc new-project local-storage
```
Optional: Allow local storage creation on master and infrastructure nodes.

You might want to use the Local Storage Operator to create volumes on master and infrastructure nodes, and not just worker nodes, to support components such as logging and monitoring.

To allow local storage creation on master and infrastructure nodes, add a toleration to the DaemonSet by entering the following commands:
```
$ oc patch ds local-storage-local-diskmaker -n local-storage -p '{"spec": {"template": {"spec": {"tolerations":[{"operator": "Exists"}]}}}}'
```
```
$ oc patch ds local-storage-local-provisioner -n local-storage -p '{"spec": {"template": {"spec": {"tolerations":[{"operator": "Exists"}]}}}}'
```

From the UI

To install the Local Storage Operator from the web console, follow these steps:

Log in to the OpenShift Container Platform web console.
Navigate to Operators → OperatorHub.
Type Local Storage into the filter box to locate the Local Storage Operator.
Click Install.
On the Create Operator Subscription page, select A specific namespace on the cluster. Select local-storage from the drop-down menu.
Adjust the values for Update Channel and Approval Strategy to the values that you want.
Click Subscribe.

Once finished, the Local Storage Operator will be listed in the Installed Operators section of the web console.

From the CLI

Install the Local Storage Operator from the CLI.

Create an object YAML file to define a Namespace, OperatorGroup, and Subscription for the Local Storage Operator, such as local-storage.yaml:

Example local-storage

  apiVersion: v1
  kind: Namespace
  metadata:
    name: local-storage
  ---
  apiVersion: operators.coreos.com/v1alpha2
  kind: OperatorGroup
  metadata:
    name: local-operator-group
    namespace: local-storage
  spec:
    targetNamespaces:
      - local-storage
  ---
  apiVersion: operators.coreos.com/v1alpha1
  kind: Subscription
  metadata:
    name: local-storage-operator
    namespace: local-storage
  spec:
    channel: "{product-version}" (1)
    installPlanApproval: Automatic
    name: local-storage-operator
    source: redhat-operators
    sourceNamespace: openshift-marketplace

1	This field can be edited to match your release selection of OpenShift Container Platform.

Create the Local Storage Operator object by entering the following command:
```
$ oc apply -f local-storage.yaml
```
At this point, the Operator Lifecycle Manager (OLM) is now aware of the Local Storage Operator. A ClusterServiceVersion (CSV) for the Operator should appear in the target namespace, and APIs provided by the Operator should be available for creation.

Verify local storage installation by checking that all Pods and the Local Storage Operator have been created:

Check that all the required Pods have been created:

$ oc -n local-storage get pods
NAME                                      READY   STATUS    RESTARTS   AGE
local-storage-operator-746bf599c9-vlt5t   1/1     Running   0          19m

Check the ClusterServiceVersion (CSV) YAML manifest to see that the Local Storage Operator is available in the local-storage project:

$ oc get csvs -n local-storage
NAME                                         DISPLAY         VERSION               REPLACES   PHASE
local-storage-operator.4.2.26-202003230335   Local Storage   4.2.26-202003230335              Succeeded

After all checks have passed, the Local Storage Operator is installed successfully.

Provision the local volumes

Local volumes cannot be created by dynamic provisioning. Instead, PersistentVolumes must be created by the Local Storage Operator. This provisioner will look for any devices, both file system and block volumes, at the paths specified in defined resource.

Prerequisites

The Local Storage Operator is installed.
Local disks are attached to the OpenShift Container Platform nodes.

Procedure

Create the local volume resource. This must define the nodes and paths to the local volumes.

Do not use different StorageClass names for the same device. Doing so will create multiple persistent volumes (PVs).

Example: Filesystem

apiVersion: "local.storage.openshift.io/v1"
kind: "LocalVolume"
metadata:
  name: "local-disks"
  namespace: "local-storage" (1)
spec:
  nodeSelector: (2)
    nodeSelectorTerms:
    - matchExpressions:
        - key: kubernetes.io/hostname
          operator: In
          values:
          - ip-10-0-140-183
          - ip-10-0-158-139
          - ip-10-0-164-33
  storageClassDevices:
    - storageClassName: "local-sc"
      volumeMode: Filesystem (3)
      fsType: xfs (4)
      devicePaths: (5)
        - /path/to/device (6)

1	The namespace where the Local Storage Operator is installed.
2	Optional: A node selector containing a list of nodes where the local storage volumes are attached. This example uses the node host names, obtained from `oc get node`. If a value is not defined, then the Local Storage Operator will attempt to find matching disks on all available nodes.
3	The volume mode, either `Filesystem` or `Block`, defining the type of the local volumes.
4	The file system that is created when the local volume is mounted for the first time.
5	The path containing a list of local storage devices to choose from.
6	Replace this value with your actual local disks filepath to the LocalVolume resource, such as `/dev/xvdg`. PVs are created for these local disks when the provisioner is deployed successfully.

Example: Block

apiVersion: "local.storage.openshift.io/v1"
kind: "LocalVolume"
metadata:
  name: "local-disks"
  namespace: "local-storage" (1)
spec:
  nodeSelector: (2)
    nodeSelectorTerms:
    - matchExpressions:
        - key: kubernetes.io/hostname
          operator: In
          values:
          - ip-10-0-136-143
          - ip-10-0-140-255
          - ip-10-0-144-180
  storageClassDevices:
    - storageClassName: "localblock-sc"
      volumeMode: Block  (3)
      devicePaths: (4)
        - /path/to/device (5)

1	The namespace where the Local Storage Operator is installed.
2	Optional: A node selector containing a list of nodes where the local storage volumes are attached. This example uses the node host names, obtained from `oc get node`. If a value is not defined, then the Local Storage Operator will attempt to find matching disks on all available nodes.
3	The volume mode, either `Filesystem` or `Block`, defining the type of the local volumes.
4	The path containing a list of local storage devices to choose from.
5	Replace this value with your actual local disks filepath to the LocalVolume resource, such as `/dev/xvdg`. PVs are created for these local disks when the provisioner is deployed successfully.

Create the local volume resource in your OpenShift Container Platform cluster, specifying the file you just created:
```
$ oc create -f <local-volume>.yaml
```

Verify the provisioner was created, and the corresponding DaemonSets were created:

$ oc get all -n local-storage

NAME                                          READY   STATUS    RESTARTS   AGE
pod/local-disks-local-provisioner-h97hj       1/1     Running   0          46m
pod/local-disks-local-provisioner-j4mnn       1/1     Running   0          46m
pod/local-disks-local-provisioner-kbdnx       1/1     Running   0          46m
pod/local-disks-local-diskmaker-ldldw         1/1     Running   0          46m
pod/local-disks-local-diskmaker-lvrv4         1/1     Running   0          46m
pod/local-disks-local-diskmaker-phxdq         1/1     Running   0          46m
pod/local-storage-operator-54564d9988-vxvhx   1/1     Running   0          47m

NAME                              TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)     AGE
service/local-storage-operator    ClusterIP   172.30.49.90     <none>        60000/TCP   47m

NAME                                           DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
daemonset.apps/local-disks-local-provisioner   3         3         3       3            3           <none>          46m
daemonset.apps/local-disks-local-diskmaker     3         3         3       3            3           <none>          46m

NAME                                     READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/local-storage-operator   1/1     1            1           47m

NAME                                                DESIRED   CURRENT   READY   AGE
replicaset.apps/local-storage-operator-54564d9988   1         1         1       47m

Note the desired and current number of DaemonSet processes. If the desired count is 0, it indicates the label selectors were invalid.

Verify that the PersistentVolumes were created:

$ oc get pv

NAME                CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS      CLAIM   STORAGECLASS   REASON   AGE
local-pv-1cec77cf   100Gi      RWO            Delete           Available           local-sc                88m
local-pv-2ef7cd2a   100Gi      RWO            Delete           Available           local-sc                82m
local-pv-3fa1c73    100Gi      RWO            Delete           Available           local-sc                48m

Create the local volume PersistentVolumeClaim

Local volumes must be statically created as a PersistentVolumeClaim (PVC) to be accessed by the Pod.

Prerequisite

PersistentVolumes have been created using the local volume provisioner.

Procedure

Create the PVC using the corresponding StorageClass:

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: local-pvc-name (1)
spec:
  accessModes:
  - ReadWriteOnce
  volumeMode: Filesystem (2)
  resources:
    requests:
      storage: 100Gi (3)
  storageClassName: local-sc (4)

1	Name of the PVC.
2	The type of the PVC. Defaults to `Filesystem`.
3	The amount of storage available to the PVC.
4	Name of the StorageClass required by the claim.

Create the PVC in the OpenShift Container Platform cluster, specifying the file you just created:
```
$ oc create -f <local-pvc>.yaml
```

Attach the local claim

After a local volume has been mapped to a PersistentVolumeClaim (PVC) it can be specified inside of a resource.

Prerequisites

A PVC exists in the same namespace.

Procedure

Include the defined claim in the resource’s Spec. The following example declares the PVC inside a Pod:

apiVersion: v1
kind: Pod
spec:
  ...
  containers:
    volumeMounts:
    - name: localpvc (1)
      mountPath: "/data" (2)
  volumes:
  - name: localpvc
    persistentVolumeClaim:
      claimName: localpvc (3)

1	Name of the volume to mount.
2	Path inside the Pod where the volume is mounted.
3	Name of the existing PVC to use.

Create the resource in the OpenShift Container Platform cluster, specifying the file you just created:
```
$ oc create -f <local-pod>.yaml
```

Deleting the Local Storage Operator’s resources

Removing a local volume

Occasionally, local volumes must be deleted. While removing the entry in the LocalVolume resource and deleting the PersistentVolume is typically enough, if you want to re-use the same device path or have it managed by a different StorageClass, then additional steps are needed.

The following procedure involves accessing a node as the root user. Modifying the state of the node beyond the steps in this procedure could result in cluster instability.

Prerequisite

The PersistentVolume must be in a Released or Available state.

Deleting a PersistentVolume that is still in use can result in data loss or corruption.

Procedure

Edit the previously created LocalVolume to remove any unwanted disks.
1. Edit the cluster resource:
  $ oc edit localvolume <name> -n local-storage
2. Navigate to the lines under devicePaths, and delete any representing unwanted disks.
Delete any PersistentVolumes created.
```
$ oc delete pv <pv-name>
```
Delete any symlinks on the node.
1. Create a debug pod on the node:
  $ oc debug node/<node-name>
2. Change your root directory to the host:
  $ chroot /host
3. Navigate to the directory containing the local volume symlinks.
  $ cd /mnt/local-storage/<sc-name> (1)
  1 The name of the StorageClass used to create the local volumes.
4. Delete the symlink belonging to the removed device.
  $ rm <symlink>

Uninstalling the Local Storage Operator

To uninstall the Local Storage Operator, you must remove the Operator and all created resources in the local-storage project.

Uninstalling the Local Storage Operator while local storage PVs are still in use is not recommended. While the PVs will remain after the Operator’s removal, there might be indeterminate behavior if the Operator is uninstalled and reinstalled without removing the PVs and local storage resources.

Prerequisites

Access to the OpenShift Container Platform web console.

Procedure

Delete any local volume resources in the project:
```
$ oc delete localvolume --all --all-namespaces
```
Uninstall the Local Storage Operator from the web console.
1. Log in to the OpenShift Container Platform web console.
2. Navigate to Operators → Installed Operators.
3. Type Local Storage into the filter box to locate the Local Storage Operator.
4. Click the Options menu at the end of the Local Storage Operator.
5. Click Uninstall Operator.
6. Click Remove in the window that appears.
The PVs created by the Local Storage Operator will remain in the cluster until deleted. Once these volumes are no longer in use, delete them by running the following command:
```
$ oc delete pv <pv-name>
```
Delete the local-storage project:
```
$ oc delete project local-storage
```