Installing the Network Observability Operator

Installing the Loki Operator
- Create a LokiStack custom resource
- LokiStack ingestion limits and health alerts
Configure authorization and multi-tenancy
Enable multi-tenancy in Network Observability
Installing Kafka (optional)
Installing the Network Observability Operator
Uninstalling the Network Observability Operator

Installing Loki is a prerequisite for using the Network Observability Operator. It is recommended to install Loki using the Loki Operator; therefore, these steps are documented below prior to the Network Observability Operator installation.

The Loki Operator integrates a gateway that implements multi-tenancy & authentication with Loki for data flow storage. The LokiStack resource manages Loki, which is a scalable, highly-available, multi-tenant log aggregation system, and a web proxy with OpenShift Container Platform authentication. The LokiStack proxy uses OpenShift Container Platform authentication to enforce multi-tenancy and facilitate the saving and indexing of data in Loki log stores.

The Loki Operator can also be used for Logging with the LokiStack. The Network Observability Operator requires a dedicated LokiStack separate from Logging.

Installing the Loki Operator

It is recommended to install Loki Operator version 5.7, This version provides the ability to create a LokiStack instance using the openshift-network tenant configuration mode. It also provides fully automatic, in-cluster authentication and authorization support for Network Observability.

Prerequisites

Supported Log Store (AWS S3, Google Cloud Storage, Azure, Swift, Minio, OpenShift Data Foundation)
OpenShift Container Platform 4.10+.
Linux Kernel 4.18+.

There are several ways you can install Loki. One way you can install the Loki Operator is by using the OpenShift Container Platform web console Operator Hub.

Procedure

Install the Loki Operator Operator:
1. In the OpenShift Container Platform web console, click Operators → OperatorHub.
2. Choose Loki Operator from the list of available Operators, and click Install.
3. Under Installation Mode, select All namespaces on the cluster.
4. Verify that you installed the Loki Operator. Visit the Operators → Installed Operators page and look for Loki Operator.
5. Verify that Loki Operator is listed with Status as Succeeded in all the projects.
Create a secret YAML file. You can create this secret in the web console or CLI.
1. Using the web console, navigate to the Project → All Projects dropdown and select Create Project. Name the project netobserv and click Create.
2. Navigate to the Import icon ,+, in the top right corner. Drop your YAML file into the editor. It is important to create this YAML file in the netobserv namespace that uses the access_key_id and access_key_secret to specify your credentials.
3. Once you create the secret, you should see it listed under Workloads → secrets in the web console.
  
  The following shows an example secret YAML file:

apiVersion: v1
kind: secret
metadata:
  name: loki-s3
  namespace: netobserv
stringData:
  access_key_id: QUtJQUlPU0ZPRE5ON0VYQU1QTEUK
  access_key_secret: d0phbHJYVXRuRkVNSS9LN01ERU5HL2JQeFJmaUNZRVhBTVBMRUtFWQo=
  bucketnames: s3-bucket-name
  endpoint: https://s3.eu-central-1.amazonaws.com
  region: eu-central-1

To uninstall Loki, refer to the uninstallation process that corresponds with the method you used to install Loki. You might have remaining ClusterRoles and ClusterRoleBindings, data stored in object store, and persistent volume that must be removed.

Create a LokiStack custom resource

It is recommended to deploy the LokiStack in the same namespace referenced by the FlowCollector specification, spec.namespace. You can use the web console or CLI to create a namespace, or new project.

Procedure

Navigate to Operators → Installed Operators, viewing All projects from the Project dropdown.
Look for Loki Operator. In the details, under Provided APIs, select LokiStack.
Click Create LokiStack.

Ensure the following fields are specified in either Form View or YAML view:

  apiVersion: loki.grafana.com/v1
  kind: LokiStack
  metadata:
    name: loki
    namespace: netobserv
  spec:
    size: 1x.small
    storage:
      schemas:
      - version: v12
        effectiveDate: '2022-06-01'
      secret:
        name: loki-s3
        type: s3
    storageClassName: gp3  (1)
    tenants:
      mode: openshift-network

1	Use a storage class name that is available on the cluster for `ReadWriteOnce` access mode. You can use `oc get storageclasses` to see what is available on your cluster.

You must not reuse the same LokiStack that is used for cluster logging.

Click Create.

Deployment Sizing

Sizing for Loki follows the format of N<x>.<size> where the value <N> is the number of instances and <size> specifies performance capabilities.

1x.extra-small is for demo purposes only, and is not supported.

Table 1. Loki Sizing
	1x.extra-small	1x.small	1x.medium
Data transfer	Demo use only.	500GB/day	2TB/day
Queries per second (QPS)	Demo use only.	25-50 QPS at 200ms	25-75 QPS at 200ms
Replication factor	None	2	3
Total CPU requests	5 vCPUs	36 vCPUs	54 vCPUs
Total Memory requests	7.5Gi	63Gi	139Gi
Total Disk requests	150Gi	300Gi	450Gi

LokiStack ingestion limits and health alerts

The LokiStack instance comes with default settings according to the configured size. It is possible to override some of these settings, such as the ingestion and query limits. You might want to update them if you get Loki errors showing up in the Console plugin, or in flowlogs-pipeline logs. An automatic alert in the web console notifies you when these limits are reached.

Here is an example of configured limits:

spec:
  limits:
    global:
      ingestion:
        ingestionBurstSize: 40
        ingestionRate: 20
        maxGlobalStreamsPerTenant: 25000
      queries:
        maxChunksPerQuery: 2000000
        maxEntriesLimitPerQuery: 10000
        maxQuerySeries: 3000

For more information about these settings, see the LokiStack API reference.

Configure authorization and multi-tenancy

Define ClusterRole and ClusterRoleBinding. The netobserv-reader ClusterRole enables multi-tenancy and allows individual user access, or group access, to the flows stored in Loki. You can create a YAML file to define these roles.

Procedure

Using the web console, click the Import icon, +.
Drop your YAML file into the editor and click Create:

Example ClusterRole reader yaml

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: netobserv-reader    (1)
rules:
- apiGroups:
  - 'loki.grafana.com'
  resources:
  - network
  resourceNames:
  - logs
  verbs:
  - 'get'

1	This role can be used for multi-tenancy.

Example ClusterRole writer yaml

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: netobserv-writer
rules:
- apiGroups:
  - 'loki.grafana.com'
  resources:
  - network
  resourceNames:
  - logs
  verbs:
  - 'create'

Example ClusterRoleBinding yaml

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: netobserv-writer-flp
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: netobserv-writer
subjects:
- kind: ServiceAccount
  name: flowlogs-pipeline    (1)
  namespace: netobserv
- kind: ServiceAccount
  name: flowlogs-pipeline-transformer
  namespace: netobserv

1	The `flowlogs-pipeline` writes to Loki. If you are using Kafka, this value is `flowlogs-pipeline-transformer`.

Enable multi-tenancy in Network Observability

Multi-tenancy in the Network Observability Operator allows and restricts individual user access, or group access, to the flows stored in Loki. Access is enabled for project admins. Project admins who have limited access to some namespaces can access flows for only those namespaces.

Prerequisite

You have installed Loki Operator version 5.7
The FlowCollector spec.loki.authToken configuration must be set to FORWARD.
You must be logged in as a project administrator

Procedure

Authorize reading permission to user1 by running the following command:
```
$ oc adm policy add-cluster-role-to-user netobserv-reader user1
```
Now, the data is restricted to only allowed user namespaces. For example, a user that has access to a single namespace can see all the flows internal to this namespace, as well as flows going from and to this namespace. Project admins have access to the Administrator perspective in the OpenShift Container Platform console to access the Network Flows Traffic page.

Installing Kafka (optional)

The Kafka Operator is supported for large scale environments. You can install the Kafka Operator as Red Hat AMQ Streams from the Operator Hub, just as the Loki Operator and Network Observability Operator were installed.

To uninstall Kafka, refer to the uninstallation process that corresponds with the method you used to install.

You can install the Network Observability Operator using the OpenShift Container Platform web console Operator Hub. When you install the Operator, it provides the FlowCollector custom resource definition (CRD). You can set specifications in the web console when you create the FlowCollector.

Prerequisites

Installed Loki. It is recommended to install Loki using the Loki Operator version 5.7.
One of the following supported architectures is required: amd64, ppc64le, arm64, or s390x.
Any CPU supported by Red Hat Enterprise Linux (RHEL) 9

This documentation assumes that your LokiStack instance name is loki. Using a different name requires additional configuration.

Procedure

In the OpenShift Container Platform web console, click Operators → OperatorHub.
Choose Network Observability Operator from the list of available Operators in the OperatorHub, and click Install.
Select the checkbox Enable Operator recommended cluster monitoring on this Namespace.
Navigate to Operators → Installed Operators. Under Provided APIs for Network Observability, select the Flow Collector link.
1. Navigate to the Flow Collector tab, and click Create FlowCollector. Make the following selections in the form view:
  - spec.agent.ebpf.Sampling : Specify a sampling size for flows. Lower sampling sizes will have higher impact on resource utilization. For more information, see the FlowCollector API reference, under spec.agent.ebpf.
  - spec.deploymentModel: If you are using Kafka, verify Kafka is selected.
  - spec.exporters: If you are using Kafka, you can optionally send network flows to Kafka, so that they can be consumed by any processor or storage that supports Kafka input, such as Splunk, Elasticsearch, or Fluentd. To do this, set the following specifications:
    
    Set the type to KAFKA.
    
    Set the address as kafka-cluster-kafka-bootstrap.netobserv.
    
    Set the topic as netobserv-flows-export. The Operator exports all flows to the configured Kafka topic.
    
    Set the following tls specifications:
    
    certFile: service-ca.crt, name: kafka-gateway-ca-bundle, and type: configmap.
    
    You can also configure this option at a later time by directly editing the YAML. For more information, see Export enriched network flow data.
  - loki.url: Since authentication is specified separately, this URL needs to be updated to https://loki-gateway-http.netobserv.svc:8080/api/logs/v1/network. The first part of the URL, "loki", should match the name of your LokiStack.
  - loki.statusUrl: Set this to https://loki-query-frontend-http.netobserv.svc:3100/. The first part of the URL, "loki", should match the name of your LokiStack.
  - loki.authToken: Select the FORWARD value.
  - tls.enable: Verify that the box is checked so it is enabled.
  - statusTls: The enable value is false by default.
    
    For the first part of the certificate reference names: loki-gateway-ca-bundle, loki-ca-bundle, and loki-query-frontend-http,loki, should match the name of your LokiStack.
2. Click Create.

Verification

To confirm this was successful, when you navigate to Observe you should see Network Traffic listed in the options.

In the absence of Application Traffic within the OpenShift Container Platform cluster, default filters might show that there are "No results", which results in no visual flow. Beside the filter selections, select Clear all filters to see the flow.

If you installed Loki using the Loki Operator, it is advised not to use querierUrl, as it can break the console access to Loki. If you installed Loki using another type of Loki installation, this does not apply.

Additional resources

For more information about Flow Collector specifications, see the Flow Collector API Reference and the Flow Collector sample resource.
For more information about exporting flow data to Kafka for third party processing consumption, see Export enriched network flow data.

Uninstalling the Network Observability Operator

You can uninstall the Network Observability Operator using the OpenShift Container Platform web console Operator Hub, working in the Operators → Installed Operators area.

Procedure

Remove the FlowCollector custom resource.
1. Click Flow Collector, which is next to the Network Observability Operator in the Provided APIs column.
2. Click the options menu for the cluster and select Delete FlowCollector.
Uninstall the Network Observability Operator.
1. Navigate back to the Operators → Installed Operators area.
2. Click the options menu next to the Network Observability Operator and select Uninstall Operator.
3. Home → Projects and select openshift-netobserv-operator
4. Navigate to Actions and select Delete Project

Remove the FlowCollector custom resource definition (CRD).

Navigate to Administration → CustomResourceDefinitions.
Look for FlowCollector and click the options menu .

Select Delete CustomResourceDefinition.

The Loki Operator and Kafka remain if they were installed and must be removed separately. Additionally, you might have remaining data stored in an object store, and a persistent volume that must be removed.