This is a cache of https://docs.openshift.com/container-platform/4.16/nodes/clusters/nodes-cluster-worker-latency-profiles.html. It is a snapshot of the page at 2024-11-05T09:56:17.095+0000.
Improving cluster stability in high latency environments using worker latency profiles - Working <strong>with</strong> clusters | Nodes | OpenShift Container Platform 4.16
  1. Documentation
    2. history bug_report picture_as_pdf
×

Improving cluster stability in high latency environments using worker latency profiles

If the cluster administrator has performed latency tests for platform verification, they can discover the need to adjust the operation of the cluster to ensure stability in cases of high latency. The cluster administrator need change only one parameter, recorded in a file, which controls four parameters affecting how supervisory processes read status and interpret the health of the cluster. Changing only the one parameter provides cluster tuning in an easy, supportable manner.

The Kubelet process provides the starting point for monitoring cluster health. The Kubelet sets status values for all nodes in the OpenShift Container Platform cluster. The Kubernetes Controller Manager (kube controller) reads the status values every 10 seconds, by default. If the kube controller cannot read a node status value, it loses contact with that node after a configured period. The default behavior is:

  1. The node controller on the control plane updates the node health to Unhealthy and marks the node Ready condition`Unknown`.

  2. In response, the scheduler stops scheduling pods to that node.

  3. The Node Lifecycle Controller adds a node.kubernetes.io/unreachable taint with a NoExecute effect to the node and schedules any pods on the node for eviction after five minutes, by default.

This behavior can cause problems if your network is prone to latency issues, especially if you have nodes at the network edge. In some cases, the Kubernetes Controller Manager might not receive an update from a healthy node due to network latency. The Kubelet evicts pods from the node even though the node is healthy.

To avoid this problem, you can use worker latency profiles to adjust the frequency that the Kubelet and the Kubernetes Controller Manager wait for status updates before taking action. These adjustments help to ensure that your cluster runs properly if network latency between the control plane and the worker nodes is not optimal.

These worker latency profiles contain three sets of parameters that are pre-defined with carefully tuned values to control the reaction of the cluster to increased latency. No need to experimentally find the best values manually.

You can configure worker latency profiles when installing a cluster or at any time you notice increased latency in your cluster network.

Understanding worker latency profiles

Worker latency profiles are four different categories of carefully-tuned parameters. The four parameters which implement these values are node-status-update-frequency, node-monitor-grace-period, default-not-ready-toleration-seconds and default-unreachable-toleration-seconds. These parameters can use values which allow you control the reaction of the cluster to latency issues without needing to determine the best values using manual methods.

Setting these parameters manually is not supported. Incorrect parameter settings adversely affect cluster stability.

All worker latency profiles configure the following parameters:

node-status-update-frequency

Specifies how often the kubelet posts node status to the API server.

node-monitor-grace-period

Specifies the amount of time in seconds that the Kubernetes Controller Manager waits for an update from a kubelet before marking the node unhealthy and adding the node.kubernetes.io/not-ready or node.kubernetes.io/unreachable taint to the node.

default-not-ready-toleration-seconds

Specifies the amount of time in seconds after marking a node unhealthy that the Kube API Server Operator waits before evicting pods from that node.

default-unreachable-toleration-seconds

Specifies the amount of time in seconds after marking a node unreachable that the Kube API Server Operator waits before evicting pods from that node.

The following Operators monitor the changes to the worker latency profiles and respond accordingly:

  • The Machine Config Operator (MCO) updates the node-status-update-frequency parameter on the worker nodes.

  • The Kubernetes Controller Manager updates the node-monitor-grace-period parameter on the control plane nodes.

  • The Kubernetes API Server Operator updates the default-not-ready-toleration-seconds and default-unreachable-toleration-seconds parameters on the control plane nodes.

Although the default configuration works in most cases, OpenShift Container Platform offers two other worker latency profiles for situations where the network is experiencing higher latency than usual. The three worker latency profiles are described in the following sections:

Default worker latency profile

with the Default profile, each Kubelet updates its status every 10 seconds (node-status-update-frequency). The Kube Controller Manager checks the statuses of Kubelet every 5 seconds (node-monitor-grace-period).

The Kubernetes Controller Manager waits 40 seconds for a status update from Kubelet before considering the Kubelet unhealthy. If no status is made available to the Kubernetes Controller Manager, it then marks the node with the node.kubernetes.io/not-ready or node.kubernetes.io/unreachable taint and evicts the pods on that node.

If a pod on that node has the NoExecute taint, the pod is run according to tolerationSeconds. If the pod has no taint, it will be evicted in 300 seconds (default-not-ready-toleration-seconds and default-unreachable-toleration-seconds settings of the Kube API Server).

Profile Component Parameter Value

Default

kubelet

node-status-update-frequency

10s

Kubelet Controller Manager

node-monitor-grace-period

40s

Kubernetes API Server Operator

default-not-ready-toleration-seconds

300s

Kubernetes API Server Operator

default-unreachable-toleration-seconds

300s
Medium worker latency profile

Use the MediumUpdateAverageReaction profile if the network latency is slightly higher than usual.

The MediumUpdateAverageReaction profile reduces the frequency of kubelet updates to 20 seconds and changes the period that the Kubernetes Controller Manager waits for those updates to 2 minutes. The pod eviction period for a pod on that node is reduced to 60 seconds. If the pod has the tolerationSeconds parameter, the eviction waits for the period specified by that parameter.

The Kubernetes Controller Manager waits for 2 minutes to consider a node unhealthy. In another minute, the eviction process starts.

Profile Component Parameter Value

MediumUpdateAverageReaction

kubelet

node-status-update-frequency

20s

Kubelet Controller Manager

node-monitor-grace-period

2m

Kubernetes API Server Operator

default-not-ready-toleration-seconds

60s

Kubernetes API Server Operator

default-unreachable-toleration-seconds

60s
Low worker latency profile

Use the LowUpdateSlowReaction profile if the network latency is extremely high.

The LowUpdateSlowReaction profile reduces the frequency of kubelet updates to 1 minute and changes the period that the Kubernetes Controller Manager waits for those updates to 5 minutes. The pod eviction period for a pod on that node is reduced to 60 seconds. If the pod has the tolerationSeconds parameter, the eviction waits for the period specified by that parameter.

The Kubernetes Controller Manager waits for 5 minutes to consider a node unhealthy. In another minute, the eviction process starts.

Profile Component Parameter Value

LowUpdateSlowReaction

kubelet

node-status-update-frequency

1m

Kubelet Controller Manager

node-monitor-grace-period

5m

Kubernetes API Server Operator

default-not-ready-toleration-seconds

60s

Kubernetes API Server Operator

default-unreachable-toleration-seconds

60s

Using and changing worker latency profiles

To change a worker latency profile to deal with network latency, edit the node.config object to add the name of the profile. You can change the profile at any time as latency increases or decreases.

You must move one worker latency profile at a time. For example, you cannot move directly from the Default profile to the LowUpdateSlowReaction worker latency profile. You must move from the Default worker latency profile to the MediumUpdateAverageReaction profile first, then to LowUpdateSlowReaction. Similarly, when returning to the Default profile, you must move from the low profile to the medium profile first, then to Default.

You can also configure worker latency profiles upon installing an OpenShift Container Platform cluster.
Procedure

To move from the default worker latency profile:

  1. Move to the medium worker latency profile:

    1. Edit the node.config object:

      $ oc edit nodes.config/cluster

    2. Add spec.workerLatencyProfile: MediumUpdateAverageReaction:

      Example node.config object
      apiVersion: config.openshift.io/v1
kind: Node
metadata:
  annotations:
    include.release.openshift.io/ibm-cloud-managed: "true"
    include.release.openshift.io/self-managed-high-availability: "true"
    include.release.openshift.io/single-node-developer: "true"
    release.openshift.io/create-only: "true"
  creationTimestamp: "2022-07-08T16:02:51Z"
  generation: 1
  name: cluster
  ownerReferences:
  - apiVersion: config.openshift.io/v1
    kind: ClusterVersion
    name: version
    uid: 36282574-bf9f-409e-a6cd-3032939293eb
  resourceVersion: "1865"
  uid: 0c0f7a4c-4307-4187-b591-6155695ac85b
spec:
  workerLatencyProfile: MediumUpdateAverageReaction (1)

# ...
      1 Specifies the medium worker latency policy.

      Scheduling on each worker node is disabled as the change is being applied.

  2. Optional: Move to the low worker latency profile:

    1. Edit the node.config object:

      $ oc edit nodes.config/cluster

    2. Change the spec.workerLatencyProfile value to LowUpdateSlowReaction:

      Example node.config object
      apiVersion: config.openshift.io/v1
kind: Node
metadata:
  annotations:
    include.release.openshift.io/ibm-cloud-managed: "true"
    include.release.openshift.io/self-managed-high-availability: "true"
    include.release.openshift.io/single-node-developer: "true"
    release.openshift.io/create-only: "true"
  creationTimestamp: "2022-07-08T16:02:51Z"
  generation: 1
  name: cluster
  ownerReferences:
  - apiVersion: config.openshift.io/v1
    kind: ClusterVersion
    name: version
    uid: 36282574-bf9f-409e-a6cd-3032939293eb
  resourceVersion: "1865"
  uid: 0c0f7a4c-4307-4187-b591-6155695ac85b
spec:
  workerLatencyProfile: LowUpdateSlowReaction (1)

# ...
      1 Specifies use of the low worker latency policy.

Scheduling on each worker node is disabled as the change is being applied.

Verification

  • When all nodes return to the Ready condition, you can use the following command to look in the Kubernetes Controller Manager to ensure it was applied:

    $ oc get KubeControllerManager -o yaml | grep -i workerlatency -A 5 -B 5
    Example output
    # ...
    - lastTransitionTime: "2022-07-11T19:47:10Z"
      reason: ProfileUpdated
      status: "False"
      type: WorkerLatencyProfileProgressing
    - lastTransitionTime: "2022-07-11T19:47:10Z" (1)
      message: all static pod revision(s) have updated latency profile
      reason: ProfileUpdated
      status: "True"
      type: WorkerLatencyProfileComplete
    - lastTransitionTime: "2022-07-11T19:20:11Z"
      reason: AsExpected
      status: "False"
      type: WorkerLatencyProfileDegraded
    - lastTransitionTime: "2022-07-11T19:20:36Z"
      status: "False"
# ...
    1 Specifies that the profile is applied and active.

To change the medium profile to default or change the default to medium, edit the node.config object and set the spec.workerLatencyProfile parameter to the appropriate value.