This is a cache of https://docs.okd.io/4.11/logging/log_collection_forwarding/cluster-logging-collector.html. It is a snapshot of the page at 2024-11-24T20:45:51.828+0000.
Configuring the logging collector - Log collection and forwarding | Logging | OKD 4.11
  1. Documentation
×

Configuring the logging collector

{logging-title-uc} collects operations and application logs from your cluster and enriches the data with Kubernetes pod and project metadata.

You can configure the CPU and memory limits for the log collector and move the log collector pods to specific nodes. All supported modifications to the log collector can be performed though the spec.collection.log.fluentd stanza in the ClusterLogging custom resource (CR).

Configuring the log collector

You can configure which log collector type your logging uses by modifying the ClusterLogging custom resource (CR).

Fluentd is deprecated and is planned to be removed in a future release. Red Hat provides bug fixes and support for this feature during the current release lifecycle, but this feature no longer receives enhancements. As an alternative to Fluentd, you can use Vector instead.
Prerequisites

  • You have administrator permissions.

  • You have installed the OpenShift CLI (oc).

  • You have installed the Red Hat OpenShift Logging Operator.

  • You have created a ClusterLogging CR.

Procedure

  1. Modify the ClusterLogging CR collection spec:

    ClusterLogging CR example
    apiVersion: logging.openshift.io/v1
kind: ClusterLogging
metadata:
# ...
spec:
# ...
  collection:
    type: <log_collector_type> (1)
    resources: {}
    tolerations: {}
# ...
    1 The log collector type you want to use for the logging. This can be vector or fluentd.

  2. Apply the ClusterLogging CR by running the following command:

    $ oc apply -f <filename>.yaml

Viewing logging collector pods

You can view the logging collector pods and the corresponding nodes that they are running on.

Procedure

  • Run the following command in a project to view the logging collector pods and their details:

    $ oc get pods --selector component=collector -o wide -n <project_name>
    Example output
    NAME           READY  STATUS    RESTARTS   AGE     IP            NODE                  NOMINATED NODE   READINESS GATES
collector-8d69v  1/1    Running   0          134m    10.130.2.30   master1.example.com   <none>           <none>
collector-bd225  1/1    Running   0          134m    10.131.1.11   master2.example.com   <none>           <none>
collector-cvrzs  1/1    Running   0          134m    10.130.0.21   master3.example.com   <none>           <none>
collector-gpqg2  1/1    Running   0          134m    10.128.2.27   worker1.example.com   <none>           <none>
collector-l9j7j  1/1    Running   0          134m    10.129.2.31   worker2.example.com   <none>           <none>

Configure log collector CPU and memory limits

The log collector allows for adjustments to both the CPU and memory limits.

Procedure

  • Edit the ClusterLogging custom resource (CR) in the openshift-logging project:

    $ oc -n openshift-logging edit ClusterLogging instance
    apiVersion: logging.openshift.io/v1
kind: ClusterLogging
metadata:
  name: instance
  namespace: openshift-logging
spec:
  collection:
    type: fluentd
    resources:
      limits: (1)
        memory: 736Mi
        requests:
          cpu: 100m
          memory: 736Mi
# ...
    1 Specify the CPU and memory limits and requests as needed. The values shown are the default values.

Advanced configuration for the Fluentd log forwarder

Fluentd is deprecated and is planned to be removed in a future release. Red Hat provides bug fixes and support for this feature during the current release lifecycle, but this feature no longer receives enhancements. As an alternative to Fluentd, you can use Vector instead.

Logging includes multiple Fluentd parameters that you can use for tuning the performance of the Fluentd log forwarder. With these parameters, you can change the following Fluentd behaviors:

  • Chunk and chunk buffer sizes

  • Chunk flushing behavior

  • Chunk forwarding retry behavior

Fluentd collects log data in a single blob called a chunk. When Fluentd creates a chunk, the chunk is considered to be in the stage, where the chunk gets filled with data. When the chunk is full, Fluentd moves the chunk to the queue, where chunks are held before being flushed, or written out to their destination. Fluentd can fail to flush a chunk for a number of reasons, such as network issues or capacity issues at the destination. If a chunk cannot be flushed, Fluentd retries flushing as configured.

By default in OKD, Fluentd uses the exponential backoff method to retry flushing, where Fluentd doubles the time it waits between attempts to retry flushing again, which helps reduce connection requests to the destination. You can disable exponential backoff and use the periodic retry method instead, which retries flushing the chunks at a specified interval.

These parameters can help you determine the trade-offs between latency and throughput.

  • To optimize Fluentd for throughput, you could use these parameters to reduce network packet count by configuring larger buffers and queues, delaying flushes, and setting longer times between retries. Be aware that larger buffers require more space on the node file system.

  • To optimize for low latency, you could use the parameters to send data as soon as possible, avoid the build-up of batches, have shorter queues and buffers, and use more frequent flush and retries.

You can configure the chunking and flushing behavior using the following parameters in the ClusterLogging custom resource (CR). The parameters are then automatically added to the Fluentd config map for use by Fluentd.

These parameters are:

  • Not relevant to most users. The default settings should give good general performance.

  • Only for advanced users with detailed knowledge of Fluentd configuration and performance.

  • Only for performance tuning. They have no effect on functional aspects of logging.
Table 1. Advanced Fluentd Configuration Parameters
Parameter Description Default

chunkLimitSize

The maximum size of each chunk. Fluentd stops writing data to a chunk when it reaches this size. Then, Fluentd sends the chunk to the queue and opens a new chunk.

8m

totalLimitSize

The maximum size of the buffer, which is the total size of the stage and the queue. If the buffer size exceeds this value, Fluentd stops adding data to chunks and fails with an error. All data not in chunks is lost.

Approximately 15% of the node disk distributed across all outputs.

flushInterval

The interval between chunk flushes. You can use s (seconds), m (minutes), h (hours), or d (days).

1s

flushMode

The method to perform flushes:

  • lazy: Flush chunks based on the timekey parameter. You cannot modify the timekey parameter.

  • interval: Flush chunks based on the flushInterval parameter.

  • immediate: Flush chunks immediately after data is added to a chunk.

interval

flushThreadCount

The number of threads that perform chunk flushing. Increasing the number of threads improves the flush throughput, which hides network latency.

2

overflowAction

The chunking behavior when the queue is full:

  • throw_exception: Raise an exception to show in the log.

  • block: Stop data chunking until the full buffer issue is resolved.

  • drop_oldest_chunk: Drop the oldest chunk to accept new incoming chunks. Older chunks have less value than newer chunks.

block

retryMaxInterval

The maximum time in seconds for the exponential_backoff retry method.

300s

retryType

The retry method when flushing fails:

  • exponential_backoff: Increase the time between flush retries. Fluentd doubles the time it waits until the next retry until the retry_max_interval parameter is reached.

  • periodic: Retries flushes periodically, based on the retryWait parameter.

exponential_backoff

retryTimeOut

The maximum time interval to attempt retries before the record is discarded.

60m

retryWait

The time in seconds before the next chunk flush.

1s

For more information on the Fluentd chunk lifecycle, see Buffer Plugins in the Fluentd documentation.

Procedure

  1. Edit the ClusterLogging custom resource (CR) in the openshift-logging project:

    $ oc edit ClusterLogging instance

  2. Add or modify any of the following parameters:

    apiVersion: logging.openshift.io/v1
kind: ClusterLogging
metadata:
  name: instance
  namespace: openshift-logging
spec:
  collection:
    fluentd:
      buffer:
        chunkLimitSize: 8m (1)
        flushInterval: 5s (2)
        flushMode: interval (3)
        flushThreadCount: 3 (4)
        overflowAction: throw_exception (5)
        retryMaxInterval: "300s" (6)
        retryType: periodic (7)
        retryWait: 1s (8)
        totalLimitSize: 32m (9)
# ...
    1 Specify the maximum size of each chunk before it is queued for flushing.
    2 Specify the interval between chunk flushes.
    3 Specify the method to perform chunk flushes: lazy, interval, or immediate.
    4 Specify the number of threads to use for chunk flushes.
    5 Specify the chunking behavior when the queue is full: throw_exception, block, or drop_oldest_chunk.
    6 Specify the maximum interval in seconds for the exponential_backoff chunk flushing method.
    7 Specify the retry type when chunk flushing fails: exponential_backoff or periodic.
    8 Specify the time in seconds before the next chunk flush.
    9 Specify the maximum size of the chunk buffer.

  3. Verify that the Fluentd pods are redeployed:

    $ oc get pods -l component=collector -n openshift-logging

  4. Check that the new values are in the fluentd config map:

    $ oc extract configmap/collector --confirm
    Example fluentd.conf
    <buffer>
  @type file
  path '/var/lib/fluentd/default'
  flush_mode interval
  flush_interval 5s
  flush_thread_count 3
  retry_type periodic
  retry_wait 1s
  retry_max_interval 300s
  retry_timeout 60m
  queued_chunks_limit_size "#{ENV['BUFFER_QUEUE_LIMIT'] || '32'}"
  total_limit_size "#{ENV['TOTAL_LIMIT_SIZE_PER_BUFFER'] || '8589934592'}"
  chunk_limit_size 8m
  overflow_action throw_exception
  disable_chunk_backup true
</buffer>